IQ LEGO Ghost Keychain Light (KE48H) Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your IQ LEGO Ghost Keychain Light. Please read these instructions carefully before use and retain them for future reference.

Image: The IQ LEGO Ghost Keychain Light, a 3-inch tall figure with a keyring attachment.

Safety Information

WARNING: This product contains button or coin cell batteries. Button batteries are hazardous if swallowed. Keep new and used batteries away from children. If you suspect batteries have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Dispose of batteries properly according to local regulations.
• This product is recommended for ages 6 and up.

Package Contents

• 1 x LEGO Ghost Keychain Light
• 2 x CR2025 3V Batteries (pre-installed)

Setup

Initial Use

The LEGO Ghost Keychain Light comes with batteries pre-installed. No initial setup is required to activate the light function. Simply press the button on the chest to operate.

Attaching to Keys or Bags

Use the durable metal keyring attached to the top of the ghost figure to secure it to your keys, backpack, purse, luggage, or lanyard.

Image: A person wearing the LEGO Ghost Keychain Light on a lanyard, demonstrating its use as an accessory.

Image: The LEGO Ghost Keychain Light attached to a black lunchbox, showcasing its versatility.

Operating Instructions

Activating the LED Lights

To turn on the LED lights located in the figure's feet, simply press and hold the button on the ghost's chest. Release the button to turn the lights off.

Image: A hand holding the LEGO Ghost Keychain Light, demonstrating the illuminated LED lights in its feet.

Posability

The ghost figure features a movable head, arms, and hands, allowing for various poses. This does not affect the light function.

Maintenance

Battery Replacement

The LEGO Ghost Keychain Light is powered by two CR2025 3V batteries. When the light dims or stops working, it's time to replace the batteries.

1. Carefully remove the back panel of the ghost figure. This may require gently prying it open.
2. Remove the old CR2025 batteries.
3. Insert two new CR2025 3V batteries, ensuring correct polarity (+/-).
4. Replace the back panel, ensuring it clicks securely into place.

Image: A diagram illustrating the location of the battery compartment and the type of batteries required (2x CR2025 3V).

Note: Refer to the Safety Information section regarding battery handling and disposal.

Troubleshooting

• Light not turning on:
  • Ensure the chest button is pressed and held firmly.
  • Check if the batteries are correctly installed with the proper polarity.
  • Replace the batteries with new CR2025 3V batteries.
• Light is dim:
  • The batteries may be low. Replace them with new CR2025 3V batteries.
• Figure parts are stiff:
  • The figure's joints are designed to be posable. Gentle manipulation should allow movement. Avoid excessive force.

Specifications

Warranty

For information regarding product warranty, please refer to the packaging or contact the manufacturer directly. Warranty terms may vary by region and retailer.

Support

If you have any questions or require further assistance with your IQ LEGO Ghost Keychain Light, please contact the manufacturer or visit the official brand store:

Visit the IQ Store on Amazon