BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe

1. Introduction

This manual provides essential instructions for the proper setup, operation, and maintenance of your BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe. This safe is designed to secure and protect your valuables using advanced biometric fingerprint scanning technology and a numeric digital keypad. It offers storage for up to 30 unique fingerprints and 1 PIN code, along with a programmable sound option for discreet access. In the event of battery depletion, two back-up keys are provided for emergency access.

2. Safety Information

• Always keep the backup keys in a secure location away from the safe. Do not store them inside the safe.
• Ensure the safe is securely mounted to prevent unauthorized removal.
• Do not expose the safe to extreme temperatures or humidity.
• Keep the fingerprint sensor clean and dry for optimal performance.
• Replace batteries promptly when the low battery indicator appears to avoid being locked out.

3. Package Contents

Please verify that all items are present in the package:

• BARSKA Biometric Fingerprint Keypad Safe
• 2 x Backup Keys
• Mounting Hardware (Bolts)
• Instruction Manual (this document)

4. Product Overview

The BARSKA Biometric Fingerprint Keypad Safe features a robust steel construction and a dual-access locking system. Below are key visual components of the safe.

Figure 1: Front view of the BARSKA Large Biometric Fingerprint Keypad Safe, showcasing its black finish and integrated lock mechanism.

Figure 2: Detailed view of the biometric fingerprint scanner and numeric keypad, with a backup key inserted into the manual override lock.

Figure 3: A finger being placed on the illuminated biometric scanner for access, demonstrating the active state of the fingerprint recognition system.

Figure 4: The safe with its external dimensions indicated: 16 inches width, 14.5 inches depth, and 17 inches height.

5. Setup

5.1 Battery Installation

The safe requires 4 AA batteries (not included) to power the electronic lock. To install:

1. Open the safe door using one of the backup keys (refer to Section 6.1).
2. Locate the battery compartment on the inside of the safe door.
3. Insert 4 new AA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover.
5. Test the keypad or fingerprint scanner to ensure power is supplied.

5.2 Mounting the Safe

This safe is designed for freestanding or tabletop placement and can be secured using the included mounting hardware.

1. Choose a suitable location for the safe, ensuring it is level and stable.
2. If mounting to a wall or floor, mark the desired drilling points through the pre-drilled holes inside the safe.
3. Drill pilot holes into the wall or floor using an appropriate drill bit.
4. Align the safe with the drilled holes and secure it using the provided bolts. Tighten all bolts firmly.

6. Operating Instructions

6.1 Initial Access (Using Backup Key)

To open the safe for the first time or in case of battery failure:

1. Locate the keyhole cover on the lock mechanism.
2. Remove the cover to expose the keyhole.
3. Insert one of the backup keys and turn it clockwise.
4. While holding the key turned, rotate the handle (if applicable) or pull the door open.

6.2 Programming Fingerprints

The safe can store up to 30 unique fingerprints.

1. With the safe door open, press the internal programming button (usually red or green, located near the battery compartment).
2. The scanner will illuminate, indicating it is ready for programming.
3. Place your finger firmly on the scanner. Lift and repeat this action several times (typically 3-5 times) until a confirmation sound or light signal is received.
4. Repeat for additional fingers or users.

6.3 Programming Keypad PIN

The safe allows for one programmable PIN code.

1. With the safe door open, press the internal programming button.
2. Enter your desired PIN code (4-8 digits) on the keypad.
3. Press the '#' or 'ENTER' button to confirm.
4. Re-enter the PIN code and press '#' or 'ENTER' again for verification. A confirmation sound or light signal will indicate successful programming.

6.4 Opening the Safe

You can open the safe using a registered fingerprint, the programmed PIN, or a backup key.

• Using Fingerprint: Place a registered finger firmly on the biometric scanner. If recognized, the safe will unlock.
• Using Keypad: Enter your programmed PIN code on the keypad, then press '#' or 'ENTER'. If correct, the safe will unlock.
• Using Backup Key: Refer to Section 6.1.

6.5 Programmable Sound Option

The safe offers a programmable sound option to eliminate default alerts when opening. Refer to your specific model's detailed instructions for enabling or disabling this feature, typically involving a combination of keypad presses or a dedicated button.

7. Maintenance

7.1 Battery Replacement

When the low battery indicator (usually a light or audible alert) appears, replace all 4 AA batteries promptly to ensure continuous operation and prevent lockout. Refer to Section 5.1 for battery installation steps.

7.2 Cleaning

Use a soft, dry cloth to clean the exterior of the safe. For the fingerprint sensor and keypad, use a slightly damp cloth and wipe gently. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.

8. Troubleshooting

• Safe does not open with fingerprint or PIN:
  • Check battery level and replace if necessary.
  • Ensure your finger is clean and dry when using the biometric scanner.
  • Try re-registering your fingerprint (Section 6.2) or re-programming your PIN (Section 6.3).
  • Ensure the correct PIN is entered.
• Safe door does not close or lock properly:
  • Ensure there are no obstructions preventing the door from closing fully.
  • Check that the locking bolts are not extended when attempting to close the door. If they are, try re-entering your code or fingerprint to retract them.
• Fingerprint scanner not activating:
  • Verify batteries are installed correctly and have sufficient charge.
  • Ensure the scanner surface is clean.
• Safe opens unexpectedly after pressing '0':
  • This indicates a potential issue with the locking mechanism or programming. Ensure the safe is properly locked after closing. If this persists, contact customer support.
• All electronic functions fail:
  • Replace batteries immediately.
  • Use the backup key for access.

9. Specifications

10. Warranty and Support

For warranty information or technical assistance, please contact Barska customer support. Details can typically be found on the manufacturer's official website or through your retailer.