1. Introduction
The Autel MX-Sensor 2-in-1 is a programmable universal Tire Pressure Monitoring System (TPMS) sensor designed to replace original equipment (OE) sensors. It features dual frequency capabilities (315MHz and 433MHz) and interchangeable valve stems (rubber or metal), providing broad vehicle coverage. This sensor is engineered for wireless programming and accurate tire pressure monitoring, contributing to vehicle safety and tire longevity.
Image 1.1: Autel MX-Sensor 2-in-1 TPMS Sensors (Set of 4).
Image 1.2: Overview of Autel MX-Sensor features including wireless programming, maximum signal strength, 100% accurate ID clone, real-time tire pressure monitoring, 99% vehicle coverage, high OE-level quality, and interchangeable valve stems.
The MX-Sensor is compatible with approximately 99% of vehicle models globally, simplifying inventory management for service providers and offering a versatile solution for vehicle owners. It meets SAE industry standards J1205/J1206 for quality and performance.
Image 1.3: Autel MX-Sensor compatibility across various vehicle makes and models.
2. Installation
The Autel MX-Sensor features a press-in design for easy installation and replacement of valve stems. This design allows for quick interchangeability between rubber and metal valve stems without requiring specialized tools.
2.1 Installation Steps
- Loosen the Tire: Safely loosen the tire from the wheel rim.
- Demount the Tire: Completely demount the tire from the wheel.
- Dismount the Old Sensor: Carefully remove the existing TPMS sensor from the wheel.
- Assemble the MX-Sensor: Insert the new Autel MX-Sensor into the valve stem opening. Ensure the valve stem is securely seated. The creative press-in design allows for hand assembly of rubber and metal valve stems.
- Mount the Tire: Mount the tire back onto the wheel, ensuring proper bead seating.
Image 2.1: Visual guide for the press-in valve installation process, demonstrating how to switch between metal and rubber stems.
2.2 Valve Stem Interchangeability
The MX-Sensor supports both metal and rubber valve stems. These can be interchanged by hand, allowing for flexibility based on vehicle requirements or user preference.
3. Programming and Operation
Autel MX-Sensors require programming using compatible Autel TPMS tools. They are designed for wireless programming and offer features such as ID cloning and simultaneous programming of multiple sensors.
3.1 Programming Features
- Wireless Programming: Sensors can be programmed wirelessly even after being mounted to the wheel.
- ID Cloning: The original sensor ID can be read and rewritten to the MX-Sensor. When cloned with the original sensor ID and placed in the same wheel position, no relearn procedure is required.
- Simultaneous Programming: Up to 20 MX-Sensors can be programmed simultaneously with compatible Autel TPMS tools due to their strong signal strength.
- Fast Relearn: Autel TPMS Sensors can be relearned by a TPMS scan tool within seconds.
Image 3.1: Autel MX-Sensors support 100% ID cloning and wireless programming, allowing up to 20 sensors to be programmed at once.
3.2 Compatible Autel TPMS Tools
The MX-Sensors are specifically designed to be programmed by Autel TPMS tools. Compatible tools include, but are not limited to:
- Autel MaxiTPMS TS408S, TS501, TS508, TS508WF, TS601, TS608, ITS600 (E), ITS600 Pro
- Autel MaxiCOM MK808TS/MK808S-TS/MK900-TS
- Autel MaxiCheck MX808TS/ MX808S-TS/MX900-TS
- Autel MaxiPRO MP808TS/MP808S-TS/MP900-TS
- Autel MaxiSys MS906TS, MS906 Pro-TS
- Autel MaxiCOM MK906 Pro-TS
Note: Autel MX-Sensors can only be programmed by Autel tools.
Image 3.2: Autel MX-Sensors are designed to integrate seamlessly with Autel TPMS programming and diagnostic tools.
4. Maintenance
The Autel MX-Sensor is built for durability and long-term performance under various operating conditions.
4.1 Battery Life
Equipped with an automotive-grade battery, the MX-Sensor is designed to provide a service life of 6 years or more, matching the performance of OE sensors.
4.2 Operating Environment
The sensors are designed to operate reliably in extreme temperatures, ranging from -40°C to 125°C (-40°F to 257°F), making them suitable for diverse climates.
4.3 Durability and Standards
Constructed with high-quality materials, the MX-Sensors are resistant to cold, heat, and corrosion. They are tested and certified to meet SAE industry standards J1205/J1206, ensuring OE-level quality and reliability.
Image 4.1: Internal components and performance characteristics of the Autel MX-Sensor, highlighting the 88 chip, dual frequency, 6-year battery life, and wide operating temperature range.
5. Troubleshooting
If you encounter issues with your Autel MX-Sensors, consider the following troubleshooting steps:
- Programming Verification: Ensure the sensors have been correctly programmed using a compatible Autel TPMS tool. Incorrect programming is a common cause of sensor malfunction.
- Tool Compatibility: Confirm that the TPMS tool used for programming is an Autel brand tool, as MX-Sensors are exclusively programmable by Autel devices.
- Sensor ID and Position: If cloning, verify that the sensor ID was accurately copied from the original sensor and that the new sensor is installed in the correct wheel position.
- Physical Inspection: After installation, visually inspect the sensor and valve stem for any signs of damage or improper seating that could lead to air leaks or communication issues.
- Vehicle Relearn Procedure: Some vehicles may require a specific relearn procedure after sensor replacement, even with ID cloning. Consult your vehicle's service manual or an Autel TPMS tool for the correct procedure.
For persistent issues or complex diagnostics, it is recommended to consult a professional automotive technician or contact Autel customer support.
6. Specifications
| Specification | Value |
|---|---|
| Model | Autel MX-Sensor 2 In 1 TPMS Sensors |
| Frequencies | 315MHz + 433MHz (Dual Frequency) |
| Material | Metal (Valve Stem) |
| Item Dimensions (L x W x H) | 5.51 x 4.72 x 1.38 inches |
| Item Weight | 0.12 Kilograms (4.2 ounces) |
| Measurement Accuracy | 10kPa (0.1 Bar) |
| Measuring Range | 100 – 900kPa |
| Operating Temperature Range | -40°C to 125°C |
| Battery Life | 6+ years |
| Valve Stem Type | Interchangeable (Metal/Rubber) |
| Compliance | SAE J1205/J1206 Test Standard |
| UPC | 713830335173, 680666196509, 680666208301 |
Image 6.1: Key technical specifications and quality standards of the Autel MX-Sensor.
7. Warranty and Support
Autel provides comprehensive support and warranty coverage for its MX-Sensors.
7.1 Warranty Information
Autel MX-Sensors are covered by a warranty against manufacturing defects for 24 months or 24,000 miles, whichever comes first. Additionally, Autel offers a 1-year undertaking for every user, ensuring product reliability and customer satisfaction.
7.2 Technical Support
For technical assistance, inquiries, or support regarding your Autel MX-Sensors, please contact Autel customer service. Reliable 24/7 technical instruction is available to assist with any operational or programming questions.
Contact: autelsevice@outlook.com
