1. Safety Information
This tent is designed for temporary outdoor use. Adherence to all safety guidelines is crucial for preventing damage and ensuring user safety.
- Anchoring: The tent must be securely anchored to the ground at all times to withstand wind. Failure to do so can result in the tent lifting or collapsing, causing injury or property damage.
- Wind Conditions: Do not leave the tent erected in strong wind conditions. Disassemble the tent if high winds are expected.
- Weather Monitoring: Regularly monitor weather forecasts. In case of severe weather, including heavy rain, snow, or strong winds, disassemble the tent immediately.
- Assembly: Assembly requires multiple individuals. Ensure all parts are correctly installed and secured before use.
- Fire Safety: Keep all heat sources and open flames away from the tent fabric. The material is not fireproof.
- Structural Integrity: Periodically inspect the frame and cover for any signs of wear, damage, or loose connections. Address any issues promptly.
2. Setup Instructions
This section outlines the general steps for assembling your GOJOOASIS Carport Tent. All necessary parts and detailed instructions are included in the packaging. It is recommended to have at least 4-8 people for efficient and safe assembly.
2.1 Unpacking and Part Identification
- Carefully unpack all components and verify against the parts list provided in your package.
- Familiarize yourself with the different frame poles, connectors, and fabric sections.
2.2 Frame Assembly
The frame consists of high-quality, rust and corrosion-resistant white powder-coated steel framework. Connect the poles using the spring buttons for secure locking.
Image 2.2.1: Key connection points including spring buttons for frame assembly.
- Begin by assembling the roof frame structure. Ensure all connections are firm.
- Attach the leg poles to the roof frame.
- The frame features a reinforced triangle structure for enhanced stability.
2.3 Cover Installation
The tent cover is made from 180g water-resistant PE material, designed to block up to 90% of UV sun rays.
- Carefully drape the main roof cover over the assembled frame.
- Secure the cover to the frame using the provided Velcro and bungee cord straps. Ensure the cover is taut to prevent water pooling.
- Attach the sidewalls. All sidewalls are removable and attach via Velcro fastenings.
2.4 Anchoring the Tent
Proper anchoring is critical for the tent's stability, especially in outdoor conditions.
Image 2.4.1: Stabilization methods for different ground types.
- Ground Spikes: For grass or soft ground, insert ground spikes and hammer them to secure the tent legs.
- Expansion Screws: For concrete or hard surfaces, drill a hole, insert expansion screws, and tighten to fix the tent.
- Utilize drawstrings at the top of the triangular structure for additional stability.
3. Operation
The GOJOOASIS Carport Tent is designed for versatility and ease of use in various outdoor settings.
3.1 Sidewall Configuration
The tent features four removable sidewalls, offering flexibility for different events and weather conditions.
Image 3.1.1: Tent with and without sidewalls.
- Enclosed Setup: With all sidewalls attached, the tent provides a sheltered space, ideal for events requiring privacy or protection from elements. It includes one zippered door for easy entrance and exit.
- Open Shade: Sidewalls can be easily removed to transform the tent into an open sun shade, suitable for summer gatherings or when increased airflow is desired.
- The sidewalls are designed for cross-ventilation and feature window designs.
3.2 UV and Water Protection
The PE cover provides protection against sun and light rain.
- The 180g PE cover blocks up to 90% of harmful UV sun rays, offering a shaded area.
- The material is water-resistant, providing shelter from light precipitation. However, it is not designed for heavy rain or prolonged exposure to wet conditions.
Image 3.2.1: GOJOOASIS Carport Tent in use as a vehicle shelter.
4. Maintenance
Regular maintenance ensures the longevity and continued performance of your GOJOOASIS Carport Tent.
- Cleaning the Cover: Clean the PE cover with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material and its water-resistant properties. Rinse thoroughly and allow to air dry completely before storage.
- Frame Inspection: Periodically check all frame connections, bolts, and spring buttons to ensure they are tight and secure. Inspect the powder-coated steel framework for any signs of rust or corrosion. Touch up any scratches or chips in the coating to prevent rust.
- Sidewall Care: Clean sidewalls as you would the main cover. Ensure zippers operate smoothly and Velcro fastenings are free of debris.
- Storage: When not in use, disassemble the tent and store all components in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the cover is completely dry before folding to prevent mildew.
- Anchoring System: Inspect ground spikes, expansion screws, and ropes for wear or damage. Replace any compromised components.
5. Troubleshooting
This section addresses common issues you might encounter with your GOJOOASIS Carport Tent.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tent unstable or swaying in light wind | Insufficient anchoring; loose frame connections. | Ensure all ground anchors (spikes or expansion screws) are fully secured. Verify all frame poles are properly connected with spring buttons engaged. Add additional ropes and stakes for extra stability if needed. |
| Water pooling on roof | Cover not taut enough; improper frame assembly. | Re-adjust the cover to ensure it is stretched tightly over the frame. Check that all roof frame poles are correctly assembled and seated. |
| Sidewalls detaching easily | Velcro fastenings not fully engaged; strong wind. | Ensure all Velcro straps are firmly attached along the entire length of the sidewall. In windy conditions, consider removing sidewalls or reinforcing them with additional ties. |
| Difficulty with frame assembly/disassembly | Spring buttons not aligning; poles stuck. | Ensure poles are aligned correctly before attempting to connect. Apply gentle pressure and wiggle if poles are stiff. Do not force connections. Lubricate connections if necessary. |
6. Product Specifications
Detailed specifications for the GOJOOASIS 20 x 26 ft Carport Tent.
Image 6.1.1: Product dimensions and capacity overview.
| Feature | Detail |
|---|---|
| Brand | GOJOOASIS |
| Model | 20x26ft Carport Tent |
| Product Dimensions | 20 ft x 26 ft (approx. 236.22" x 313" x 133.85" H) |
| Item Weight | 170 Pounds |
| Material | Alloy Steel, Metal, Polyethylene (PE) |
| Frame Material | Alloy Steel, Metal, Plastic (Powder Coated Steel) |
| Cover Material | 180g Water Resistant PE Cover |
| Color | White |
| Water Resistance Level | Waterproof (for light rain) |
| UV Protection | Blocks up to 90% UV sun rays |
| Sidewalls | 4 removable sidewalls, 1 zippered door |
| Assembly Required | Yes |
| Recommended Uses | Outdoor Activities, Party, Wedding Receptions, Family Reunions, Car/Boat Protection |
7. Warranty & Support
7.1 Warranty Information
Specific warranty details for the GOJOOASIS 20 x 26 ft Carport Tent are typically provided with your purchase documentation. Please refer to the warranty card or contact the manufacturer directly for comprehensive information regarding coverage, terms, and conditions.
7.2 Customer Support
For any questions, concerns, or assistance with your GOJOOASIS product, please contact the manufacturer or seller through the platform where the purchase was made. Have your model number (20x26ft Carport Tent) and ASIN (B07FSHYTGH) ready when contacting support for faster service.