Product Overview
The Vileda Turbo Smart Microfiber Wet Mop and Bucket Set (Model: Smart Sistema) is designed for efficient floor cleaning. This system includes a mop head, a bucket with a pedal-activated wringing mechanism, and a telescopic handle. The microfiber mop head is effective for various floor types and is machine washable.
Image: The complete Vileda Turbo Smart Microfiber Wet Mop and Bucket Set, featuring the red mop head, black telescopic handle, and grey bucket with red accents.
Key Features:
- 100% polyester microfiber mop head for effective cleaning.
- Easy release system of the bucket with a pedal mechanism for hands-free wringing.
- Triangular mop head design for reaching corners and tight spaces.
- Complete kit including mop head, bucket, and telescopic handle.
- High-quality Vileda materials.
Setup Instructions
- Assemble the Handle: Connect the sections of the telescopic handle by twisting them clockwise until secure. Extend the handle to a comfortable length by twisting counter-clockwise to loosen, extending, and then twisting clockwise to tighten.
- Attach the Mop Head: Align the mop head with the base of the handle. Press firmly until it clicks into place. Ensure the mop head is securely attached before use.
- Prepare the Bucket: Place the bucket on a flat, stable surface. Fill the bucket with water up to the indicated "MAX" line. Add your preferred floor cleaning solution if desired.
Operating Instructions
- Wet the Mop: Dip the microfiber mop head into the water in the bucket, ensuring it is fully saturated.
- Wring the Mop: Place the wet mop head into the wringer basket. Hold the handle upright and press the foot pedal repeatedly to spin the mop head. The more you press the pedal, the drier the mop head will become, allowing for control over wetness for different floor types.
- Mop the Floor: Begin mopping your floor. The triangular head design allows for effective cleaning in corners and along edges.
- Repeat: Re-wet and wring the mop as needed to maintain cleanliness and desired wetness.
- Floor Compatibility: The Vileda Turbo Smart Microfiber Wet Mop is safe for use on all floor types, including wood, tile, and laminate.
Image: A person's foot operating the red pedal on the Vileda mop bucket to wring out the mop head, with an indicator showing wetness control from 1X (wet) to 5X (dry).
Image: A person standing in a living room, easily spinning and drying the Vileda mop using the foot pedal on the bucket, demonstrating the ease of use.
Image: The triangular Vileda mop head reaching deep into a corner of a room, highlighting its ability to clean hard-to-reach areas.
Image: The Vileda mop head resting on a floor that transitions between wood and tile, illustrating its suitability for various floor surfaces.
Maintenance
Mop Head Care:
- Washing: The microfiber mop head is machine washable. Remove the mop head from the handle and place it in a washing machine. Wash with similar colors at a maximum temperature of 60°C (140°F). Do not use bleach or fabric softener.
- Drying: Air dry the mop head. Do not tumble dry.
- Replacement: For optimal cleaning performance, it is recommended to replace the mop head every 6 months.
Image: A person detaching the Vileda mop head from its handle and preparing to place it into a washing machine, indicating it is machine washable.
Image: A split image showing a clean, new Vileda mop head on one side and a visibly used, discolored mop head on the other, with text indicating "1 REFILL = 6 MONTHS" for replacement.
Bucket Care:
- Cleaning: After each use, empty the dirty water from the bucket. Rinse the bucket thoroughly with clean water.
- Storage: Store the bucket and mop in a dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mop head not spinning effectively. | Mop head not properly seated in the wringer basket, or mechanism is jammed. | Ensure the mop head is correctly positioned in the wringer. Check for any debris obstructing the spinning mechanism. If the issue persists, the spin mechanism might be faulty (refer to warranty). |
| Mop head detaches during use. | Mop head not securely attached to the handle. | Re-attach the mop head, ensuring it clicks firmly into place. |
| Floor remains too wet after mopping. | Mop head not wrung out sufficiently. | Press the foot pedal more times to achieve a drier mop head before mopping. |
Specifications
- Model: Smart Sistema
- Included Components: Mop Head, Bucket, Telescopic Handle
- Material: Microfiber (Mop Head), Aluminum (Handle)
- Item Weight: Approximately 10.6 ounces (300 Grams)
- Product Dimensions: 19.69 x 11.81 x 9.84 inches
- Handle Type: Telescopic
- Color: Standard
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Vileda website. The product typically comes with a manufacturer's warranty covering defects in materials and workmanship.
