Introduction
Thank you for choosing the Sunter Professional LED Vanity Mirror, Model VM-2018. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your new mirror. Please read these instructions thoroughly before use and retain them for future reference.
This mirror features dual 1x and 10x magnification, natural daylight LED illumination (6,500K), and a fog-free design, all encased in a durable brushed nickel finish.
Important Safety Information
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:
- For indoor use only.
- Do not place in direct sunlight.
- Always unplug the mirror prior to installing or changing the bulb.
- Keep the power cord away from heat sources.
- Do not operate if the cord or plug is damaged.
- Do not use attachments not recommended by the manufacturer.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Unplug from outlet when not in use and before cleaning.
Setup Instructions
The Sunter Professional LED Vanity Mirror (VM-2018) comes fully assembled and ready for use. No assembly is required.
- Unpacking: Carefully remove the mirror from its packaging. Inspect for any damage during transit.
- Placement: Place the mirror on a stable, flat surface, such as a vanity or countertop. Ensure there is adequate space around the mirror and that the power cord can reach an electrical outlet without being strained or obstructed.
- Power Connection: Plug the mirror's power cord into a standard 120V AC electrical outlet.
Image: Front view of the Sunter Professional LED Vanity Mirror, showing its brushed nickel finish and illuminated ring.
Operating Instructions
- Turning On/Off: Locate the power switch on the base of the mirror. Press the switch to turn the LED illumination on or off.
- Adjusting Magnification: The mirror features two sides:
- 1x Magnification: Provides a true-to-life reflection for general viewing.
- 10x Magnification: Offers enhanced magnification for detailed tasks such as makeup application or tweezing.
- Adjusting Angle: The mirror head can be tilted up or down to achieve the desired viewing angle. Hold the mirror frame and adjust as needed.
Image: Illustration of the dual-sided mirror, indicating 1x and 10x magnification for different uses.
Video: A demonstration of the Sunter Professional LED Vanity Mirror, showcasing its rotation and illumination features.
Maintenance and Care
- Cleaning: Unplug the mirror before cleaning. Wipe the mirror surfaces and the brushed nickel finish with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or mirror coating.
- Bulb Replacement: The mirror uses an energy-saving replaceable LED bulb. Always unplug the mirror before attempting to replace the bulb. Refer to the warranty section for information on the lifetime warranty for the LED bulb.
- Storage: When not in use for extended periods, store the mirror in a dry, safe place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror light does not turn on. |
|
|
| Mirror surface is foggy. | High humidity in the environment. | The mirror is designed to be fog-free. If fogging occurs, ensure the room is well-ventilated. Wipe with a soft, dry cloth if necessary. |
| Mirror wobbles or does not hold angle. | Loose pivot points or unstable placement. | Ensure the mirror is placed on a completely flat and stable surface. If the pivot points feel loose, contact customer support. |
Product Specifications
- Model: VM-2018
- Brand: Sunter
- Magnification: Dual 1x / 10x
- Illumination: LED, 6,500K (Natural Daylight)
- Finish: Brushed Nickel
- Material: Metal/Glass construction
- Special Features: Two-Sided, Fog-Free
- Power Source: AC
- Voltage: 120 Volts
- Wattage: 8 watts
- Product Dimensions: 10"L x 1"W (Mirror head diameter is approximately 10 inches, overall height is 18 inches as per product title)
- Item Weight: 4.62 pounds (2.1 Kilograms)
- UPC: 846270000186
Warranty and Support
Product Warranty: This Sunter vanity mirror includes a one (1) year warranty, which covers manufacturer defects and workmanship under normal use. The LED bulb carries a lifetime warranty.
For warranty claims or technical assistance, please contact Sunter customer support. Please have your model number (VM-2018) and proof of purchase available.
Contact Information: Please refer to the product packaging or the official Sunter website for the most current customer support contact details.