Philips BT7512/15 Series 7000 Beard Trimmer User Manual

1. Introduction

Product Overview

The Philips BT7512/15 Series 7000 Beard Trimmer is designed to provide precise beard trimming with an integrated vacuum system for a cleaner grooming experience. This device features advanced cutting technology and adjustable settings to achieve your desired beard length.

Key Features

• Integrated vacuum system captures up to 90% of cut hairs for a mess-free trim.
• Patented DualCut technology with double-sharpened stainless steel blades for efficient cutting.
• 20 adjustable cutting lengths from 0.5 mm to 10 mm via the Philips Zoom wheel.
• Easy cleaning with fully washable blades.
• Up to 60 minutes of cordless use on a single charge.

Image 1.1: Philips BT7512/15 Series 7000 Beard Trimmer with included accessories, including combs, precision trimmer, cleaning brush, pouch, and charging stand.

2. Important Safety Information

Please read all safety instructions carefully before using the appliance to prevent injury or damage.

• Keep out of reach of children.
• Do not use on babies.
• Avoid contact with eyes and skin.
• Keep away from water sources. Do not immerse the main unit in water.
• Follow all cleaning and maintenance instructions provided in this manual.
• Only use the charger supplied with the product.
• Do not use the appliance if it is damaged.

3. Package Contents

Verify that all items are present in the box:

• 1 x Philips BT7512/15 Beard Trimmer
• 1 x Precision Trimmer attachment
• 2 x Precision Combs (3 mm, 5 mm)
• 1 x Quality Pouch
• 1 x Cleaning Brush
• 1 x Charging Stand

4. Setup

Charging the Trimmer

1. Ensure the trimmer is switched off.
2. Connect the charging stand to a power outlet.
3. Place the trimmer onto the charging stand. The charging indicator light will illuminate.
4. Charge the trimmer for approximately 1 hour for a full charge, providing up to 60 minutes of cordless use. A quick 5-minute charge can provide enough power for one trim.

Attaching and Removing Combs

1. To attach a comb, slide it onto the trimmer head until it clicks into place.
2. To remove a comb, gently pull it upwards and away from the trimmer head.

5. Operating Instructions

Adjusting Trim Length

1. Ensure a comb is attached to the trimmer.
2. Rotate the Philips Zoom wheel located on the trimmer handle to select your desired length setting. The selected length will be displayed.
3. Available settings range from 0.5 mm to 10 mm in 0.5 mm increments.

Image 5.1: Adjusting the trim length using the integrated Zoom wheel.

Trimming Technique

1. Turn on the trimmer by pressing the power button.
2. Place the flat top of the comb against your skin.
3. Move the trimmer slowly against the direction of hair growth.
4. For an even trim, ensure the comb remains in full contact with your skin.
5. Use the precision trimmer attachment for detailing edges and hard-to-reach areas.

Image 5.2: Demonstrating the proper technique for trimming a beard.

Integrated Vacuum System

The trimmer's integrated vacuum system automatically collects cut hairs into an internal chamber, significantly reducing mess during trimming. This system operates automatically when the trimmer is in use.

Image 5.3: Internal view illustrating the vacuum airflow and hair collection system.

6. Maintenance

Cleaning the Trimmer

Regular cleaning ensures optimal performance and hygiene.

1. Turn off the trimmer and disconnect it from the power source.
2. Remove the comb attachment.
3. Open the hair collection chamber and empty the collected hairs into a waste bin.
4. Use the supplied cleaning brush to remove any remaining hairs from the cutting element and the vacuum chamber.
5. The blades are fully washable. Rinse the cutting element under running tap water. Do not rinse the main body of the trimmer under water.
6. Allow all parts to air dry completely before reassembling or storing the trimmer.

Image 6.1: Steps for cleaning the trimmer: emptying the hair chamber and rinsing the blades.

Storage

Store the trimmer and its accessories in the provided quality pouch in a dry, safe place, away from extreme temperatures and direct sunlight.

7. Troubleshooting

• Trimmer does not turn on: Ensure the trimmer is fully charged. If the issue persists, try charging it for a longer period.
• Poor trimming performance: Clean the cutting blades and hair chamber thoroughly. Ensure the comb attachment is correctly secured. The blades may require oiling (refer to Philips support for recommended lubricants).
• Vacuum system not collecting hair effectively: Empty the hair collection chamber. Ensure there are no blockages in the vacuum inlet or chamber.
• Battery life is short: Ensure the trimmer is charged for the recommended duration. Battery performance may decrease over time with prolonged use.

If you encounter issues not listed here or if problems persist, please contact Philips customer support.

8. Specifications

9. Warranty and Support

This Philips product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, product registration, or to find replacement parts and accessories, please visit the official Philips website or contact Philips customer service in your region. Contact information can typically be found in the warranty documentation or on the Philips website.