Introduction
The Klipsch R-41SA speakers are designed to deliver immersive sound, including overhead effects, thanks to their Dolby Atmos enablement. These versatile speakers can be added to existing monitor or tower speakers or used as dedicated surround speakers to create a rich, detailed sound experience. Featuring Klipsch's exclusive Tractrix horn technology and Linear Travel Suspension (LTS) aluminum tweeters, the R-41SA provides clean, natural sound with minimal distortion. The Injection Molded Graphite (IMG) woofer cones ensure remarkable low-frequency response. This manual provides essential information for setting up, operating, and maintaining your Klipsch R-41SA speakers.
Important Safety Information
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
What's in the Box
Upon opening your Klipsch R-41SA package, please verify that all components are present and in good condition:
- Klipsch R-41SA Speakers (2 units)
- Grills (2 units)
- User Manual (this document)
Image: Front view of the Klipsch R-41SA speakers, showcasing their design and components.
Product Features
The Klipsch R-41SA speakers incorporate advanced technologies for superior audio performance:
- Dolby Atmos Enabled: Designed to deliver immersive, multi-dimensional sound, including overhead effects, when integrated into a compatible home theater system.
- 90° x 90° Tractrix Horn: Our exclusive horn technology ensures high-frequency energy is aimed directly at the listener, reducing artificial reverb caused by indirect sound bouncing off walls. This results in clear, detailed, and dynamic sound.
- Linear Travel Suspension (LTS) Aluminum Tweeter with Kapton Suspension: Minimizes distortion for enhanced, detailed high-frequency performance. Kapton, a lightweight and rigid material, is used in the tweeter suspension to provide high efficiency and improve resolution.
- Spun Copper Injection Molded Graphite (IMG) Woofer: Exceptionally light yet rigid cones provide remarkable low-frequency response with minimal cone breakup and distortion, ensuring powerful and accurate bass.
- MDF Cabinet with Scratch-Resistant, Textured Wood Grain Vinyl: Provides a stylish aesthetic with absolute durability, ensuring seamless integration into any decor while reducing cabinet vibration for improved sonic accuracy.
- Low Profile Magnetic Grilles: Offer a polished, modern appearance and are easily removable for a different aesthetic preference.
Setup
Speaker Placement
The Klipsch R-41SA speakers are versatile and can be used in several configurations:
- As Dolby Atmos Elevation Speakers: Place the R-41SA speakers on top of your existing front or rear tower/monitor speakers. The angled design will project sound upwards, reflecting off the ceiling to create overhead sound effects.
- As Dedicated Surround Speakers: The R-41SA can also function as traditional surround speakers. Place them to the sides or slightly behind your listening position, at ear level or slightly above, for a more enveloping sound field.
Image: Side view of the Klipsch R-41SA, highlighting its angled design for Dolby Atmos sound projection.
Connecting Your Speakers
To connect your R-41SA speakers to your audio receiver or amplifier:
- Ensure your receiver/amplifier is turned off and unplugged from the power outlet.
- Use high-quality speaker wire (not included) to connect the speakers. Match the positive (+) terminal (red) on the speaker to the positive (+) terminal on your receiver, and the negative (-) terminal (black) on the speaker to the negative (-) terminal on your receiver.
- For Dolby Atmos elevation, connect the R-41SA speakers to the "Height" or "Dolby Atmos" speaker outputs on your compatible A/V receiver.
- For use as traditional surround speakers, connect them to the "Surround" or "Rear" speaker outputs.
- Ensure all connections are secure to prevent short circuits and ensure optimal sound quality.
Operating Your Speakers
Once connected, operating your Klipsch R-41SA speakers is straightforward:
- Power On: Plug in and power on your A/V receiver.
- Receiver Setup: Access your receiver's speaker setup menu. If using the R-41SA as Dolby Atmos elevation speakers, configure your receiver to recognize them as "Height" or "Dolby Atmos Enabled" speakers. If using as surrounds, configure them as "Surround" or "Rear" speakers.
- Calibration: Run your receiver's automatic room correction system (e.g., Audyssey, MCACC, YPAO) if available. This will optimize speaker levels, distances, and equalization for your listening environment.
- Enjoy: Play your favorite movies, music, or games and experience the enhanced sound provided by your Klipsch R-41SA speakers.
Maintenance
To ensure the longevity and optimal performance of your Klipsch R-41SA speakers, follow these simple maintenance guidelines:
- Cleaning: Dust the speaker cabinets regularly with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the finish.
- Grilles: The magnetic grilles can be removed for cleaning. Gently wipe them with a soft, dry cloth. If necessary, a very slightly damp cloth can be used, but ensure they are completely dry before reattaching.
- Environment: Avoid placing speakers in direct sunlight or near heat sources. Keep them away from excessive moisture or humidity.
- Connections: Periodically check speaker wire connections to ensure they remain secure and free of corrosion.
Troubleshooting
If you encounter issues with your Klipsch R-41SA speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers. | Loose speaker wire connections; incorrect receiver output selected; receiver not powered on. | Check all speaker wire connections at both the speaker and receiver. Ensure the correct input/output is selected on your receiver. Verify receiver is powered on. |
| Distorted or unclear sound. | Damaged speaker wire; incorrect speaker polarity; overdriving the speakers. | Inspect speaker wires for damage. Ensure positive (+) and negative (-) terminals are correctly matched. Reduce volume to prevent overdriving. |
| Lack of overhead effects (Dolby Atmos). | Receiver not configured for Dolby Atmos; content not Dolby Atmos encoded; incorrect speaker placement. | Verify your A/V receiver is Dolby Atmos compatible and configured correctly for height speakers. Ensure the content you are playing is Dolby Atmos encoded. Confirm speakers are placed on top of front/rear speakers, angled upwards. |
| One speaker not working. | Loose connection to that specific speaker; faulty speaker wire. | Check connections for the non-working speaker. Swap speaker wires with a working speaker to determine if the wire is faulty. |
Specifications
Image: Dimensions of the Klipsch R-41SA speaker.
| Feature | Detail |
|---|---|
| Model Name | Klipsch R-41SA |
| Speaker Type | Woofer, Tweeter (Dolby Atmos Enabled) |
| Mounting Type | Wall Mount (though primarily designed for on-speaker placement) |
| Material | Wood (MDF Cabinet) |
| Color | Black |
| Product Dimensions (D x W x H) | 13"D x 5.75"W x 7"H |
| Item Weight | 6.8 Pounds (per speaker) |
| Woofer Diameter | 4 Inches (Spun-Copper IMG) |
| Tweeter Diameter | 1 Inch (Linear Travel Suspension Aluminum) |
| Impedance | 8 Ohm |
| Power Handling (Cont/Peak) | 50W / 100W |
| Frequency Response | 83 Hz (minimum) |
| Surround Sound Channel Configuration | 5.1 (when used as part of a system) |
| Connectivity Technology | Wired |
| Number of Items | 2 (Set of 2 speakers) |
| UPC | 743878035537 |
Warranty and Support
Klipsch products are built with quality and precision. For information regarding your product's warranty, please refer to the warranty card included in your original packaging or visit the official Klipsch website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Klipsch customer support through their official channels. Keep your proof of purchase for warranty claims.
Online Resources:
- Official Klipsch Website: www.klipsch.com
- Amazon Product Page: amazon.com/dp/B07FKCP7PY