Introduction
Thank you for choosing the Greenlite LED PAR20 Dimmable Flood Light Bulb. This product is designed to provide efficient and high-quality illumination for various indoor and outdoor applications. This manual contains important information regarding the safe installation, operation, and maintenance of your new LED bulbs. Please read it thoroughly before use and retain it for future reference.
Safety Information
- WARNING: To avoid electric shock, always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- This bulb is designed for 120V electrical systems. Ensure your fixture's voltage matches this requirement.
- Suitable for use in damp and wet locations, making it ideal for both indoor and outdoor applications.
- Do not use with standard dimmers unless specifically rated for LED compatibility. Using an incompatible dimmer may cause flickering or damage to the bulb.
- Do not disassemble or modify the bulb. There are no user-serviceable parts inside.
- Avoid direct eye exposure to the light source when the bulb is illuminated.
- Ensure the fixture is properly grounded.
Package Contents
Your package should contain the following items:
- Greenlite LED PAR20 Dimmable Flood Light Bulb (Quantity: 2)
Image: The Greenlite LED PAR20 Dimmable Flood Light Bulb packaging, showing two bulbs and key features like 7W, 50W equivalent, 25,000 hours lifespan, and 3000K color temperature.
Setup and Installation
Follow these steps to safely install your Greenlite LED PAR20 Dimmable Flood Light Bulb:
- Turn off Power: Locate the circuit breaker or fuse box that controls the light fixture. Turn off the power to prevent electrical shock.
- Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it has been recently in use.
- Install New Bulb: Gently screw the Greenlite LED PAR20 bulb into the E26 medium base socket. Do not overtighten.
- Restore Power: Once the bulb is securely installed, turn the power back on at the circuit breaker or fuse box.
Image: A detailed view of the Greenlite LED PAR20 bulb, highlighting its physical dimensions (2.5 inches wide, 3.2 inches high) and the standard E26 medium screw base, crucial for proper fitment.
Operating Instructions
Operating your Greenlite LED PAR20 bulb is straightforward:
- Standard Operation: Once installed and power is restored, simply use your wall switch to turn the light on or off.
- Dimming Functionality: This bulb is dimmable. If connected to a compatible LED dimmer switch, you can adjust the light output to your desired brightness level. Ensure your dimmer is specifically designed for LED bulbs to ensure optimal performance and prevent damage.
Maintenance
The Greenlite LED PAR20 bulb requires minimal maintenance:
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb's finish or internal components.
- No User-Serviceable Parts: This bulb contains no user-serviceable parts. Do not attempt to open or repair it.
- Replacement: When the bulb reaches the end of its lifespan, replace it by following the installation steps outlined in this manual.
Troubleshooting
If you encounter issues with your Greenlite LED PAR20 bulb, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, or faulty bulb. | Check the circuit breaker. Ensure the bulb is screwed in tightly. Test the bulb in another working fixture. |
| Bulb flickers or dims improperly. | Incompatible dimmer switch or loose connection. | Ensure your dimmer switch is specifically designed for LED bulbs. Tighten the bulb in the socket. |
| Bulb lifespan is shorter than expected. | Operating in an enclosed fixture without proper ventilation, excessive heat, or voltage fluctuations. | Ensure the bulb is not used in a fully enclosed fixture unless specified. Verify stable voltage supply. |
Specifications
Detailed technical specifications for the Greenlite LED PAR20 7W Dimmable Flood Light Bulb:
| Feature | Specification |
|---|---|
| Brand | Greenlite |
| Light Type | LED |
| Wattage | 7 Watts (50W Equivalent) |
| Brightness | 500 Lumens |
| Color Temperature | 3000 Kelvin (Bright White) |
| Beam Angle | 30° Narrow Flood |
| Bulb Shape Size | PAR20 |
| Bulb Base | E26 Medium |
| Voltage | 120 Volts |
| Dimmable | Yes |
| Indoor/Outdoor Usage | Indoor, Outdoor (Weatherproof) |
| Average Lifespan | 25,000 Hours |
| Certifications | Energy Star, UL Listed, RoHS |
| Material | Plastic |
| Product Dimensions | 2.5 x 2.5 x 3.2 inches |
| Item Weight | 5.6 ounces |
Image: The Greenlite LED PAR20 bulb displaying the Energy Star and UL Listed certifications, indicating energy efficiency and safety compliance.
Warranty and Support
Greenlite products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the contact information provided on the product packaging or visit the official Greenlite website. Please have your product model and purchase date available when contacting support.
