Aerobed Luxury Full Inflatable Bed User Manual

Introduction

Thank you for choosing the Aerobed Luxury Full Inflatable Bed. This 12-inch thick inflatable bed provides a comfortable sleeping solution with its built-in pump and durable design. This manual provides essential information for the safe and efficient use of your new inflatable bed. Please read these instructions thoroughly before initial use and retain them for future reference.

Figure 1: The Aerobed Luxury Full Inflatable Bed, shown with a fitted sheet, highlighting its full size and integrated design.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Do not expose the bed to direct sunlight or extreme temperatures.
• Keep sharp objects away from the bed surface.
• Ensure the power cord is not pinched or damaged.
• Do not overinflate the bed.
• This product is intended for indoor use only.
• Keep away from children and pets during inflation/deflation.

Package Contents

• Aerobed Luxury Full Inflatable Bed
• Built-in 120V AC Pump
• Polyester Carrying Bag

Setup

Unpacking and Preparation

1. Remove the inflatable bed from its carrying bag.
2. Unroll the bed and lay it flat on a clean, smooth surface, free from sharp objects.
3. Ensure the area is clear and provides enough space for the bed to fully inflate.

Inflation

The Aerobed Luxury Full Inflatable Bed features a powerful built-in 120V AC pump for easy inflation.

1. Locate the built-in pump on the side of the bed.
2. Plug the 120V AC power cord (1.83 meters) into a standard electrical outlet.
3. Turn the pump dial or switch to the "Inflate" position. The bed will begin to inflate automatically.
4. Allow the bed to inflate to your desired firmness. The pump has an auto-stop feature to prevent overinflation.
5. Once inflated, turn the pump dial or switch to the "Off" position and unplug the power cord.

Figure 2: Close-up view of the built-in 120V AC pump on the Aerobed, showing the power cord and control dial. This pump facilitates quick and easy inflation and deflation.

Operating Instructions

Adjusting Firmness

The built-in pump includes a handheld wand (2.7 meter controller cord) for fine-tuning the bed's firmness.

1. While the bed is inflated, plug in the pump.
2. Use the handheld wand to add or release air in small increments until the desired firmness is achieved.
3. Unplug the pump when finished.

Deflation

The Aerobed features a patented Whoosh® valve for quick and effortless deflation.

1. Ensure the bed is clear of any occupants or bedding.
2. Locate the Whoosh® valve, typically near the pump.
3. Open the Whoosh® valve. Air will rapidly escape from the bed.
4. For faster deflation, turn the built-in pump dial or switch to the "Deflate" position and plug it in.
5. Once deflated, turn off the pump and unplug it.
6. Fold or roll the bed neatly for storage.

Figure 3: The patented Whoosh® valve, designed for rapid and effortless deflation of the Aerobed. This feature allows for quick packing and storage.

Maintenance

Cleaning

The sleep surface of the Aerobed is treated to be antimicrobial, stopping the spread of germs.

Figure 4: The soft, antimicrobial-treated sleep surface of the Aerobed, designed to inhibit the spread of germs and provide a comfortable sleeping experience.

• Wipe the surface of the bed with a damp cloth and mild soap.
• Do not use harsh chemicals or abrasive cleaners.
• Ensure the bed is completely dry before storing.
• The product care instructions mention "Machine Wash" for the removable cover, if applicable. For the mattress itself, spot cleaning is recommended.

Storage

Proper storage helps prolong the life of your inflatable bed.

• After deflation, fold or roll the bed neatly.
• Store the bed in its convenient polyester carrying bag.
• Keep the bed in a cool, dry place, away from direct sunlight and extreme temperatures.
• A mesh pocket is included for wand and cord storage.

Troubleshooting

Specifications

• Model Name: Aerobed
• Size: Full
• Dimensions (Packaged): 1"L x 4"W x 2"Th
• Special Feature: Built-In 120V AC Pump with Auto-Stop Inflation & Deflation
• Color: Blue
• Item Weight (Packaged): 1 pounds
• UPC: 760433002605
• ASIN: B07FFD78XX
• First Available: November 15, 2019
• Care Instructions: Machine Wash (for cover, if applicable)
• Item Firmness Description: Firm

Note: Product dimensions and weight listed are for the packaged product. Refer to product listing for inflated dimensions.

Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your proof of purchase for any warranty claims.

Manufacturer: Aerobed

Please note that warranty terms may vary based on region and retailer.