1. Safety Information
WARNING: Continuous and competent supervision of children and individuals with disabilities by an adult is required at all times when the pool is in use. Failure to follow these instructions can result in serious injury or drowning.
Ensure the pool is installed on a level, stable surface. Do not install the pool on a balcony, terrace, or roof without consulting a qualified technician to verify the maximum load capacity of the structure.
Image: Warning sign indicating a maximum usage load of 1004 kg/m², calculated for 7 users weighing 50 kg each. Important: Consult a technician for maximum load capacity when installing on terraces, balconies, or roofs.
2. Product Overview
The Intex Prism Frame Oval Pool offers a durable and easy-to-assemble solution for backyard swimming. This model features a robust metal frame and a triple-layer liner for enhanced resistance. The kit includes essential accessories for immediate use.
Key Features:
- Durable Liner: Triple-layer construction for superior resistance.
- Easy Installation: Simple assembly with metal tubes.
- Safety Ladder: Includes a safety ladder with removable steps.
- Filter Pump: Equipped with a 5.7 m³/h (5,678 L/Hr) filter pump for water circulation.
- Hydro Aeration Technology: Integrated system for improved water quality and clarity.
Image: The Intex Prism Frame Oval Pool, model 26796NP, fully assembled in a garden environment, showcasing its oval shape and sturdy frame.
3. Setup and Installation
The Intex Prism Frame Oval Pool is designed for straightforward assembly, typically taking approximately 45-60 minutes with two people.
3.1 Site Preparation
- Choose a Level Area: Select a perfectly level and firm area in your garden. The ground must be free of sharp objects, debris, and excessive slopes.
- Clearance: Ensure at least one meter of clear space around the entire perimeter of the pool for safety and maintenance access.
- Ground Protection: It is recommended to lay a ground cloth or tarp (included in the kit) before assembly. For added stability and to prevent unevenness, some users opt for a 4-5 cm layer of sand between two thick tarps (one under the sand, one between the sand and the pool's ground cloth).
- Drainage: Position the pool near a suitable drainage area, but away from electrical outlets or overhead power lines.
3.2 Assembly Steps
- Unpack Components: Carefully unpack all pool components and lay them out on the prepared ground cloth. Verify all parts are present according to the packing list.
- Assemble Frame: Follow the detailed instructions provided in the separate assembly guide for connecting the metal tubes to form the oval frame. Ensure all connections are secure.
- Install Liner: Carefully spread the pool liner within the assembled frame. Ensure the drain plug is positioned correctly.
- Fill with Water: Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended fill line (approximately 104 cm).
- Attach Filter Pump: Connect the filter pump and hoses according to the pump's instruction manual. Ensure all connections are tight to prevent leaks.
- Install Safety Ladder: Assemble and install the safety ladder. Always ensure the ladder is stable before use.
Image: Diagram showing the dimensions of the Intex Prism Frame Oval Pool: 503 cm length, 274 cm width, 122 cm height, with a water depth of 104 cm. Assembly time is approximately 60 minutes, and the capacity is 13,365 liters.
Image: Close-up diagram illustrating the triple-layer liner construction with a thickness of 0.69mm for enhanced durability and resistance.
4. Operating Instructions
Proper operation ensures a clean and safe swimming environment.
4.1 Filter Pump Operation
- The included filter pump (5.7 m³/h flow rate) is essential for circulating and filtering pool water.
- Operate the pump daily for several hours, typically 4-6 hours, depending on pool usage and environmental conditions. Refer to the pump's specific manual for detailed operating times.
- Ensure the pump is connected to a grounded electrical outlet and kept away from the pool edge to prevent water exposure.
4.2 Water Treatment
- Chemical Balance: Regularly test the pool water for pH, chlorine, and alkalinity levels using a water testing kit. Maintain pH levels between 7.2 and 7.6.
- Chlorination: Add appropriate pool chemicals (e.g., chlorine tablets or liquid chlorine) to sanitize the water and prevent algae growth. Follow manufacturer's instructions for dosage.
- Hydro Aeration Technology: The integrated Hydro Aeration Technology enhances water circulation and filtration, improving water clarity and freshness by introducing air into the water.
Image: Illustration of Intex Hydro Aeration Technology for improved water circulation and filtration, showing the filter pump (5.678 L/Hr flow rate) and filter cartridge type A.
5. Maintenance
Regular maintenance is crucial for the longevity of your pool and the quality of its water.
5.1 Daily Maintenance
- Skim Debris: Use a skimmer net to remove leaves, insects, and other floating debris from the water surface.
- Check Water Levels: Ensure the water level is within the recommended range.
5.2 Weekly Maintenance
- Test Water Chemistry: Perform comprehensive water tests and adjust chemical levels (pH, chlorine, alkalinity) as needed.
- Clean Filter Cartridge: Turn off the filter pump and remove the filter cartridge. Rinse it thoroughly with a garden hose. Replace the cartridge every 2-4 weeks, or more frequently with heavy use.
- Vacuum Pool Floor: Use a pool vacuum to remove dirt and debris from the bottom of the pool.
- Inspect Liner and Frame: Check the pool liner for any signs of wear, tears, or discoloration. Inspect the metal frame for rust or loose connections.
5.3 Seasonal Maintenance
- Winterization: Before freezing temperatures, drain the pool completely. Clean and dry all components thoroughly. Store the liner and metal frame in a dry, protected area.
- Opening the Pool: In spring, reassemble the pool, fill it, and balance the water chemistry before use.
6. Troubleshooting
This section addresses common issues you might encounter with your Intex Prism Frame Oval Pool.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water is cloudy or green | Improper chemical balance, insufficient filtration, algae growth. | Test water chemistry and adjust pH/chlorine levels. Run filter pump for longer periods. Clean or replace filter cartridge. Shock treat the pool with appropriate chemicals. |
| Filter pump is noisy or not circulating water effectively | Clogged filter cartridge, air in the system, pump malfunction, insufficient power. | Clean or replace filter cartridge. Bleed air from the pump system. Ensure pump is properly connected to power. If issues persist, contact customer support. |
| Water level is dropping (leak) | Puncture in liner, loose hose connections, faulty drain plug. | Inspect the liner for visible holes and use a repair kit. Tighten all hose clamps and connections. Ensure the drain plug is securely closed. |
| Liner discoloration or texture changes | Chemical imbalance, prolonged sun exposure, wear and tear. | Maintain proper water chemistry. Ensure the pool is covered when not in use to reduce sun exposure. If discoloration or texture changes significantly affect usability, contact customer support. |
7. Specifications
- Brand: Intex
- Model Number: 26796NP
- Shape: Oval
- Color: Blue
- Material: Metal (frame), Triple-layer PVC (liner)
- Product Dimensions (L x W x H): 5.03 x 2.74 x 1.22 meters
- Water Capacity: 13,365 liters
- Item Weight: 98.2 Kilograms
- Filter Pump Flow Rate: 5.7 m³/h (5,678 L/Hr)
- Assembly Required: Yes
- Included Components: Pool liner, metal frame, filter pump, safety ladder, ground cloth, pool cover.
- Outdoor Use: Yes
- Special Features: Dual suction outlet fittings for improved water circulation.
8. Warranty & Support
8.1 Manufacturer's Warranty
This Intex Prism Frame Oval Pool comes with a 2-year manufacturer's warranty. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects under normal use and service.
8.2 Customer Support
For technical assistance, spare parts, or warranty inquiries, please contact Intex customer support:
- Manufacturer: Intex Trading B.V.
- Address: Ettenseweg 46, 4706 PB, Roosendaal, The Netherlands
- Website: www.intex.eu/support
When contacting support, please have your model number (26796NP) and purchase date readily available.