Manuals+

Y Team YCC-XB056

Y Team Controller Charger Kit for Xbox 360 User Manual

Model: YCC-XB056

1. Product Overview

The Y Team Controller Charger Kit provides a convenient solution for charging two Xbox 360, Xbox 360E, or Xbox 360S controllers simultaneously. This kit includes a dual charging dock and two rechargeable battery packs, designed to replace standard AA batteries.

Key features include fast charging capabilities, clear LED indicators for charging status, and built-in safety protections.

Y Team Xbox 360 Controller Charger Kit contents

Image: Contents of the Y Team Controller Charger Kit, including the dual charging dock, two rechargeable battery packs, and a USB cable.

2. Package Contents

  • 1 x Dual Charging Dock
  • 2 x Rechargeable Battery Packs
  • 1 x USB Charging Cable

3. Setup Instructions

Follow these steps to set up your Y Team Controller Charger Kit:

3.1. Installing the Battery Packs

  1. Locate the battery compartment on the back of your Xbox 360 controller.
  2. Remove any existing battery packs or AA batteries.
  3. Insert a Y Team rechargeable battery pack into the compartment, ensuring it clicks securely into place.
  4. Repeat for the second controller if applicable.
Installation of battery pack into Xbox 360 controller

Image: Step-by-step illustration of inserting the rechargeable battery pack into an Xbox 360 controller.

3.2. Connecting the Charging Dock

  1. Connect the provided USB charging cable to the "Steady Port" located at the back of the charging dock.
  2. Plug the other end of the USB cable into a compatible USB power source, such as a wall charger (not included), a PC USB port, or a USB port on your Xbox 360 console.
Close-up of charging dock ports

Image: Detailed view of the charging dock, highlighting the charge pins and the USB steady port for power input.

4. Operating Instructions

4.1. Charging Controllers

  1. Once the battery packs are installed in your controllers and the charging dock is powered, place the controllers onto the charging slots of the dock. Ensure the controller's charging contacts align with the "Charge Pin" on the dock.
  2. The controllers should sit securely in the dock.
Step-by-step guide for placing controllers on the charging dock

Image: Visual guide demonstrating the correct method to place Xbox 360 controllers onto the dual charging dock.

4.2. LED Indicator Status

The charging dock features LED indicators to show the charging status of each controller:

  • Red Light: Indicates that the controller is currently charging.
  • Yellow Light: Indicates that the controller battery is fully charged or the dock is in standby mode.
LED indicators showing charging and full charge status

Image: Two Xbox 360 controllers on the charging dock, illustrating the red LED for charging and yellow LED for fully charged status.

A full charge for two controllers typically takes approximately 3.5 hours.

Graphic indicating 3.5 hours for fast charging

Image: A visual representation highlighting the 3.5-hour fast charging capability of the dock.

5. Maintenance

To ensure the longevity and optimal performance of your charging kit:

  • Keep the charging dock and battery packs clean and dry. Use a soft, dry cloth to wipe away dust or debris.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
  • Do not attempt to disassemble or modify the charging dock or battery packs.
  • Store the kit in a cool, dry place when not in use.

6. Troubleshooting

If you encounter issues with your Y Team Controller Charger Kit, refer to the following common problems and solutions:

ProblemPossible Cause / Solution
Controllers are not charging (no red LED).
  • Ensure the USB cable is securely connected to both the charging dock and the power source.
  • Verify the power source is active (e.g., wall outlet is working, PC is on).
  • Check if the controllers are correctly seated on the charging pins. Adjust their position if necessary.
  • Confirm the battery packs are properly installed in the controllers.
Controllers do not sync with the Xbox 360 after charging.
  • Ensure the battery packs are fully charged (yellow LED).
  • Attempt to re-sync the controller with the Xbox 360 console using the sync buttons on both the controller and the console.
  • Verify that your Xbox 360 controller is an original Microsoft brand or a compatible third-party controller. Some third-party controllers may have compatibility issues with certain battery packs.
Charging is slow or inconsistent.
  • Ensure you are using a stable power source.
  • Check for any debris on the charging pins of the dock or the contacts on the battery packs.
  • Avoid charging in extremely hot environments, as this can affect charging efficiency.

The charging station is equipped with IC protection against over-charging, over-voltage, and short-circuiting to ensure safe and reliable operation.

Graphic illustrating safe charging features

Image: Diagram showing the multiple safety protections integrated into the charging system, including over-charging, over-heated, over-voltage, and short-circuit protection.

7. Specifications

FeatureDetail
Model NumberYCC-XB056
Compatible DevicesXbox 360, Xbox 360E, Xbox 360S Controllers
Connector TypeUSB Type A
Total USB Ports2 (for charging controllers)
Amperage1000 Milliamps
Wattage5 watts
Special FeatureFast Charging, IC Protection (Over-charging, Over-voltage, Short-circuit)
ColorBlack
Package Dimensions6.22 x 4.61 x 3.5 inches
Item Weight0.01 ounces (charger only)
Batteries Included2 Rechargeable Battery Packs

8. Warranty and Support

Y Team is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, if you have any concerns, questions, or require assistance with your controller charger kit, please do not hesitate to contact Y Team customer support.

Our support team is available to provide a satisfactory solution for any issues you may encounter.

For customer support, please refer to the contact information provided with your product packaging or visit the official Y Team website.

Related Documents - YCC-XB056

Preview Wireless Game Controller for PS-4/PS-4 Slim/PS-4 Pro/PC Instruction Manual
Instruction manual detailing the setup, features, and usage of the wireless game controller compatible with PlayStation 4 consoles and PC. Includes connection guides, button functions, and technical specifications.
Preview X-ONE Controller Wireless Adapter for Windows 10 PC - User Manual (Model XB073)
Comprehensive user manual for the X-ONE Controller Wireless Adapter for Windows 10 PC, model XB073. This guide provides step-by-step instructions for installation, driver setup, and controller pairing to enhance your PC gaming experience.
Preview YCCTEAM X-ONE Power Supply for Xbox One: Instruction Manual & Specifications
Comprehensive guide for the YCCTEAM X-ONE Power Supply (Model: YCC-XB043) for Xbox One consoles. Includes setup, usage tips, safety information, troubleshooting, and specifications.
Preview Wireless Game Controller for PS4/PC - User Guide
Comprehensive user guide for the wireless game controller compatible with PS4, PS4 Slim, PS4 Pro, and PC. Includes features, connection instructions, pairing methods, LED indicator descriptions, technical parameters, and FCC compliance information.
Preview Sim-Lab Mercedes-AMG PETRONAS Formula One Team Sim Racing Cockpit - Instruction Manual
Detailed assembly instructions and parts list for the Sim-Lab Mercedes-AMG PETRONAS Formula One Team Sim Racing Cockpit (Version 1.1). Includes hardware details, compatibility information, and optional seat setup.
Preview YCC PS6002 Wireless Game Controller User Manual for PS4 and PC
User guide for the YCC PS6002 wireless game controller, detailing its features, connection instructions, pairing methods, and specifications for use with PlayStation 4 consoles and PCs. Includes FCC compliance information. Product details: SKU HC000, Name PS6002 PS4 Controller User Manual, Size 340*130mm, Material 105G coated paper, double-sided printing, four-fold.