Xtricity 1-50061

Download PDF
Contents

Xtricity LED Puck Light Bulb Instruction Manual

Model: 1-50061

1. Introduction

This manual provides essential information for the safe and effective use of your Xtricity LED Puck Light Bulb. Please read these instructions thoroughly before installation and operation. Retain this manual for future reference.

Six Xtricity LED Puck Light Bulbs, showing their flat, low-profile design and E26 screw base.

Image 1: Xtricity LED Puck Light Bulbs (6-pack).

2. Safety Information

Observe the following safety precautions to prevent injury or damage:

  • Power Disconnection: Always disconnect power to the fixture before installing, removing, or servicing the bulb.
  • Voltage Compatibility: Ensure the fixture's voltage (120V) matches the bulb's requirements.
  • Indoor Use: This bulb is designed for indoor use in dry or damp locations. Do not expose to direct water or extreme outdoor conditions.
  • Dimmable Feature: Use only with compatible LED dimmers to ensure proper functionality and prevent damage.
  • Heat: Although LED bulbs produce less heat than incandescent bulbs, they can still be warm to the touch. Allow the bulb to cool before handling.
  • Disposal: Dispose of used bulbs according to local regulations.

3. Setup and Installation

The Xtricity LED Puck Light Bulb features a standard E26 medium screw base for easy installation.

  1. Turn off Power: Locate the light switch or circuit breaker controlling the fixture and turn off the power.
  2. Remove Old Bulb: Carefully unscrew the existing bulb from the fixture.
  3. Install New Bulb: Screw the Xtricity LED Puck Light Bulb into the E26 socket until it is finger-tight. Do not overtighten.
  4. Restore Power: Turn the power back on at the switch or circuit breaker.
Diagram showing the dimensions of the Xtricity LED Puck Light Bulb, with an E26 Medium Base, measuring 75mm (2.95 inches) in diameter and 64mm (2.53 inches) in height. UL Listed, FCC, and RoHS symbols are also visible.

Image 2: Bulb dimensions and E26 base detail.

4. Operating Instructions

The Xtricity LED Puck Light Bulb provides 4000K Cool White illumination and is dimmable for adjustable brightness.

  • Turning On/Off: Use the standard light switch connected to your fixture.
  • Dimming: If connected to a compatible LED dimmer switch, adjust the dimmer to achieve the desired light intensity. The bulb supports dimming from 25% to 100% brightness.
  • Light Color: The bulb emits a 4000K Cool White light, suitable for task lighting and general illumination in various indoor settings.
An image demonstrating the dimmable feature of the 4000K Cool White light, showing brightness levels at 25%, 50%, 75%, and 100% in a kitchen setting.

Image 3: Dimmable light functionality at 4000K Cool White.

Four panels showing various indoor applications for the low profile light bulb: closets/cupboards, offices, bathrooms, and kitchens.

Image 4: Examples of typical indoor usage areas.

5. Maintenance

The Xtricity LED Puck Light Bulb is designed for long-lasting performance with minimal maintenance.

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Lifespan: This LED bulb has an average lifespan of 25,000 hours, significantly longer than traditional incandescent bulbs.
  • Energy Efficiency: The bulb consumes only 11 watts, providing an 85% energy saving compared to a 60-watt incandescent equivalent.
Text overlay on a forest background highlighting energy efficiency: 'Low Heat Dissipation', 'Save 85% on your Energy Bill', and 'Long Lasting: Lasts 30x Longer than Traditional Bulb'.

Image 5: Energy efficiency and longevity benefits.

6. Troubleshooting

If you encounter issues with your LED Puck Light Bulb, consider the following:

  • Bulb Not Lighting:
    • Ensure the power switch is on.
    • Check if the bulb is screwed in securely.
    • Verify that the circuit breaker has not tripped.
    • Test the bulb in another working fixture to confirm if the bulb or fixture is the issue.
  • Flickering:
    • Ensure you are using an LED-compatible dimmer switch. Incompatible dimmers can cause flickering.
    • Check for loose connections in the fixture or switch.
  • Dim Light Output:
    • If using a dimmer, ensure it is set to the maximum brightness.
    • Confirm the bulb's specifications (800 lumens) meet your lighting needs.

7. Specifications

A detailed graphic of the LED Closet Puck Light, highlighting its key specifications: 60W Equivalent, 11W Power, 120V Voltage, 4000K Cool White, 800 Lumens, Dimmable & Flicker Free, and 25,000 hrs Lifespan.

Image 6: Key product specifications at a glance.

FeatureSpecification
BrandXtricity
Model Number1-50061
Light TypeLED
Special FeaturesDimmable, Low Profile
Wattage11 Watts
Incandescent Equivalent60 Watts
Bulb BaseE26
Light ColorCool White
Color Temperature4000 Kelvin
Brightness800 Lumens
Voltage120 Volts
Average Life25,000 Hours
ShapePuck
MaterialPlastic
Indoor/Outdoor UsageIndoor
Product Dimensions3 x 3 x 2.5 inches
CertificationsUL Listed, RoHS, FCC

8. Warranty and Support

For warranty information or technical support, please refer to the Xtricity official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Online Resources:

9. Product Video

Video 1: Xtricity - Efficient Lighting Solutions. This video provides an overview of Xtricity's commitment to efficient and sustainable lighting, showcasing various applications and benefits of their products.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.