Easytry123 Replacement Remote Control for Samsung Smart 3D TVs

Introduction

This manual provides instructions for the Easytry123 Replacement Remote Control, model Easytry1227. This remote is designed as a replacement for various Samsung UE-Series Smart 3D TV models. Please refer to the compatibility list below to ensure this remote is suitable for your television.

Compatible Samsung TV Models:

• UE46F5570SS
• UE39F5300AW
• UE42F5300AW
• UE55ES6550S
• UE55ES6557U
• UE55ES6560S
• UE55ES6560U
• UE55ES6565U

Important Note: As a replacement item, this remote control may not support all functions of your original remote. Functionality may vary depending on your specific TV model.

Setup: Battery Installation

The remote control requires two (2) AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Gently slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
3. Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Incorrect insertion can prevent the remote from functioning.
4. Slide the battery compartment cover back into place until it clicks securely.

Figure 1: Battery compartment with AAA batteries inserted. Ensure correct polarity.

After installing the batteries, the remote control should be ready for use with your compatible Samsung TV.

Operating the Remote Control

This replacement remote control operates by pointing it directly at your Samsung TV's infrared (IR) receiver. No programming or pairing is typically required for basic functions.

• Power On/Off: Press the POWER button to turn your TV on or off.
• Channel Selection: Use the CH +/- buttons to change channels or the number pad to directly enter channel numbers.
• Volume Control: Adjust the volume using the VOL +/- buttons.
• Mute: Press the MUTE button to silence the TV audio.
• Navigation: Use the directional arrow buttons (Up, Down, Left, Right) and the ENTER/OK button to navigate menus and select options.
• Smart Hub/Menu: Buttons for Smart Hub, Menu, or Source selection will function as labeled, provided your TV model supports these features via a standard IR remote.

If certain advanced functions or smart features do not respond, it may be due to the nature of this being a replacement remote, which might not replicate all proprietary functions of the original manufacturer's remote.

Maintenance

To ensure the longevity and proper functioning of your remote control, please follow these maintenance guidelines:

• Cleaning: Wipe the remote control periodically with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the surface or internal components.
• Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA).
• Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can cause damage. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Drops: Protect the remote from physical impact, as drops can damage internal circuitry.

Troubleshooting

If you experience issues with your Easytry123 Replacement Remote Control, try the following troubleshooting steps:

1. Remote Not Responding:
   • Check if the batteries are inserted correctly with the correct polarity (+/-).
   • Replace the batteries with fresh AAA batteries.
   • Ensure there are no obstructions between the remote control and the TV's IR receiver.
   • Make sure you are pointing the remote directly at the TV.
2. Limited Functionality:
   • Remember that this is a replacement remote. Some advanced or proprietary functions specific to your original TV remote may not be supported.
   • Verify that your TV model is listed in the "Compatible Samsung TV Models" section of this manual.
3. Buttons Not Working:
   • Ensure the remote is clean and free of debris that might be jamming buttons.
   • If only specific buttons are not working, and the remote is old, it might indicate internal wear.

If these steps do not resolve the issue, please refer to your TV's original manual for specific remote control settings or contact the seller for further assistance.

Specifications

Important Notes

• This remote is a replacement and may not offer identical functionality to the original remote that came with your TV.
• No programming is typically required; simply insert batteries and point at the TV.
• Ensure your TV's IR receiver is not blocked for optimal performance.