WOLTU Bike Rack FZ1132 Instruction Manual

1. Important Safety Information

Please read this manual carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury. Keep this manual for future reference.

• Maximum Load Capacity: Do not exceed the maximum load capacity of 40 kg (88 lbs) or 3 bicycles.
• Vehicle Compatibility: Ensure the bike rack is securely attached to your vehicle's trunk or hatchback. Verify compatibility with your specific vehicle type (cars, MPVs, SUVs, hatchbacks).
• Bike Compatibility: This rack is designed for standard bicycles. Refer to the compatibility chart for specific bike types.
• Secure Attachment: Always ensure all straps, clamps, and adjustment knobs are tightened securely before driving. Regularly check tightness during long journeys.
• Visibility: Ensure the bike rack and bicycles do not obstruct your vehicle's taillights, brake lights, turn signals, or license plate. If obstructed, additional lighting and a license plate holder may be required by local regulations.
• Clearance: Maintain adequate clearance between the bike rack, bicycles, and the vehicle's exhaust system to prevent damage.
• Driving Speed: Reduce speed, especially on rough roads, during strong winds, or when cornering. Avoid sudden braking or acceleration.
• Regular Inspection: Periodically inspect the rack for wear, damage, or loose components. Replace any damaged parts immediately.
• Children: Keep children away from the bike rack during installation and removal.

2. Product Components

The WOLTU FZ1132 Bike Rack includes the following main components:

• Main frame (iron construction)
• Bike support arms with 6 pre-assembled PVC clamps (red and black)
• Adjustable straps with sprocket buckles
• Rubber protective covers (4 units)
• Adjustment knobs
• Lower support bar with foam padding

Image: Front view of the WOLTU FZ1132 bike rack, showing the main frame, bike support arms, and lower support bar.

Image: Close-up of a red and black bike frame clamp, designed to securely hold bicycle frames.

3. Vehicle and Bike Compatibility

The WOLTU FZ1132 bike rack is designed for universal fit on various vehicle types and accommodates most standard bicycles. Please refer to the following guidelines:

3.1 Vehicle Types

This rack is suitable for:

• Cars (Sedans)
• MPVs (Multi-Purpose Vehicles)
• SUVs (Sport Utility Vehicles)
• Hatchbacks

3.2 Bicycle Types

The rack is generally compatible with standard bicycles. However, some bicycle types may not be suitable due to frame design or weight. Always ensure the bike frame can be securely clamped and does not exceed the individual bike weight limit (if applicable) or the total 40 kg capacity.

Image: Visual guide indicating compatible vehicle body styles (sedan, hatchback, SUV) and compatible bicycle frame types (road bike, mountain bike). Some vehicle types like vans or certain bike types like step-through frames may not be suitable.

4. Setup and Installation

The WOLTU FZ1132 bike rack is designed for easy, tool-free installation. Follow these steps for secure mounting:

1. Unfold the Rack: Carefully unfold the bike rack to its operational position. Ensure all hinges lock into place.
2. Position on Vehicle: Place the upper padded arms of the rack against the top edge of your vehicle's trunk or hatchback. The lower padded bar should rest against the vehicle's bumper or lower trunk area.
   

   Image: The bike rack positioned on the rear of a vehicle, showing the upper arms resting on the trunk and lower arms against the bumper.

3. Attach Upper Straps: Hook the upper straps to the top edge of the trunk/hatchback. Pull the straps firmly to secure the top of the rack.
4. Attach Side Straps: Hook the side straps to the side edges of the trunk/hatchback. Tighten these straps to pull the rack horizontally against the vehicle.
5. Attach Lower Straps: Hook the lower straps to the bottom edge of the trunk/hatchback or under the bumper. Tighten these straps to pull the bottom of the rack firmly against the vehicle.
   

   Image: Details of the strap attachment points and the adjustment mechanism for the rack arms. The rubber protective covers prevent scratches to the vehicle.

6. Adjust Rack Angle: Use the adjustment knobs (as shown in the image) to set the optimal angle for the bike support arms. Ensure the arms are level or slightly angled upwards to prevent bikes from sliding forward. Tighten the knobs securely.
   

   Image: The adjustment knob, indicated by a red arrow, used to modify the angle of the bike support arms. Turn clockwise to tighten.
7. Final Check: Before loading bikes, vigorously shake the rack to ensure it is stable and does not move excessively. Re-tighten all straps and knobs if necessary. The 4 rubber protective covers should be properly positioned to prevent vehicle scratches.

5. Operating Instructions (Loading Bicycles)

Once the rack is securely installed on your vehicle, you can proceed to load your bicycles.

1. Prepare Bicycles: Remove any loose items from the bicycles (e.g., water bottles, pumps, bags) that could fall off during transit.
2. Lift and Position: Lift the first bicycle and place its top tube onto the bike support arms. Position the bicycle so that the frame rests securely in the PVC clamps.
3. Secure with Clamps: Close the PVC clamps around the bicycle frame. Ensure the clamps are tight and the bike cannot shift or rotate. The straps on the clamps should be used to further secure the bike.
4. Load Additional Bikes: Repeat the process for additional bicycles, up to a maximum of 3 bikes and 40 kg total weight. Alternate the direction of the bikes (front wheel facing left, then right) to optimize space and prevent handlebars from colliding.
5. Secure Wheels: Use additional straps (not included, but recommended) to secure the wheels of the bicycles to prevent them from spinning or moving excessively during transit.
6. Final Security Check: After loading all bikes, perform a final check. Shake each bike individually and the entire rack assembly to ensure everything is stable. Verify that no part of the bikes obstructs vehicle lights or the license plate.
   

   Image: A red bicycle securely mounted on the WOLTU FZ1132 bike rack on the back of a white SUV.

6. Maintenance and Care

Proper maintenance will extend the life of your WOLTU FZ1132 bike rack.

• Cleaning: Clean the rack with mild soap and water after use, especially if exposed to dirt, salt, or road grime. Rinse thoroughly and dry.
• Lubrication: Periodically apply a small amount of lubricant to moving parts and hinges to ensure smooth operation.
• Strap Inspection: Regularly inspect all straps for fraying, cuts, or wear. Replace damaged straps immediately.
• Rubber Pads: Check the condition of the rubber protective covers. Ensure they are not cracked or worn, as they protect your vehicle's paint.
• Storage: When not in use, fold the rack for compact storage. Store it in a dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your bike rack, refer to the following common problems and solutions:

• Rack feels unstable:
  • Ensure all six straps are correctly attached and fully tightened.
  • Verify that the adjustment knobs for the support arms are securely tightened.
  • Check that the rack is properly seated on the vehicle's trunk/hatchback, with padded areas making full contact.
• Bikes are swaying or moving:
  • Ensure the PVC clamps are tightly closed around the bicycle frames.
  • Use the integrated straps on the clamps to further secure the bikes.
  • Consider using additional bungee cords or straps to secure wheels and prevent bike-to-bike contact.
• Rack is scratching the vehicle:
  • Ensure all 4 rubber protective covers are in place and not damaged.
  • Verify that the rack is installed correctly and not rubbing against unprotected parts of the vehicle.
  • Clean the contact points on both the vehicle and the rack before installation to prevent trapped debris from causing scratches.
• Difficulty folding/unfolding:
  • Check for any obstructions in the hinge mechanisms.
  • Apply a small amount of lubricant to the hinges if they are stiff.

8. Specifications

Image: Detailed dimensions of the bike rack in both folded and unfolded states, along with its maximum load capacity of 40 kg.

9. Warranty and Support

For warranty information or technical support, please refer to the official WOLTU website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

WOLTU Official Website: Visit WOLTU Store