1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the ACTi E93 5MP Indoor Mini Dome Camera. The E93 is a high-performance indoor surveillance camera designed for reliable monitoring with advanced features such as Wide Dynamic Range (WDR), Power over Ethernet (PoE), and robust event management capabilities. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
Key Features:
- 5 Megapixel Resolution for clear imaging.
- Basic WDR (74 dB) for improved image quality in varying light conditions.
- Fixed Lens with f1.9mm/F2.8 for a wide field of view.
- H.264 video compression for efficient storage and bandwidth usage.
- Power over Ethernet (PoE) for simplified installation.
- MicroSDHC/MicroSDXC card slot for local storage.
- IK08 vandal-proof rating for enhanced durability.
- Advanced event triggers and response mechanisms.
2. Package Contents
Verify that all items are present in the package. If any items are missing or damaged, contact your vendor immediately.
- ACTi E93 Mini Dome Camera
- Mounting Screws and Anchors
- Quick Installation Guide
- Software CD (may vary by region)
3. Physical Description
Figure 3.1: Front view of the ACTi E93 Mini Dome Camera, showing the dome enclosure and lens.
Figure 3.2: Internal view of the ACTi E93 Mini Dome Camera, highlighting key components.
- Ethernet Port: RJ-45 connector for network and Power over Ethernet (PoE) connection.
- Power LED: Indicates power status.
- Reset Button: Used to restore factory default settings.
- Memory Card Slot: For MicroSDHC/MicroSDXC card installation for local storage.
4. Setup and Installation
4.1 Mounting the Camera
- Select a Location: Choose an indoor location that provides the desired viewing angle and is within range of your network infrastructure. Ensure the mounting surface is strong enough to support the camera's weight.
- Prepare the Surface: Use the provided mounting template (if applicable) to mark the drill holes. Drill pilot holes for the mounting screws.
- Secure the Base: Attach the camera's mounting base to the prepared surface using the provided screws and anchors.
- Connect Cables: Route the Ethernet cable through the designated opening in the mounting base and connect it to the camera's Ethernet port.
- Adjust Viewing Angle: Loosen the adjustment screws to pan (±90°) and tilt (0°-90°) the camera lens to the desired position. Tighten the screws once adjusted.
- Attach Dome Cover: Secure the dome cover to the camera body. The E93 features an IK08 vandal-proof casing.
4.2 Powering the Camera
The ACTi E93 camera supports Power over Ethernet (PoE) Class 2 (IEEE802.3af). Connect the camera to a PoE-enabled switch or a PoE injector using a standard Ethernet cable. No separate power adapter is required when using PoE.
4.3 Network Connection and Initial Access
- Connect to Network: Ensure the camera is connected to your network via the Ethernet cable.
- Discover Camera: Use ACTi's IP Utility software (available on the ACTi website) to discover the camera on your network and find its assigned IP address.
- Access Web Interface: Open a web browser and enter the camera's IP address. You will be prompted to enter a username and password. Refer to the Quick Installation Guide for default credentials. It is highly recommended to change the default password immediately for security.
- Initial Configuration: Follow the on-screen prompts to complete the initial setup, including setting the date/time, network settings, and user accounts.
4.4 MicroSD Card Installation
The camera supports MicroSDHC/MicroSDXC cards for local video storage.
- Power Off: Disconnect the camera from power before installing or removing the MicroSD card.
- Locate Slot: Refer to Figure 3.2 to locate the Memory Card Slot (4).
- Insert Card: Gently insert the MicroSD card into the slot until it clicks into place.
- Format Card: After powering on, access the camera's web interface to format the MicroSD card. This ensures proper functionality and compatibility.
5. Operation
5.1 Live View and Recording
Access the camera's web interface or a compatible Network Video Recorder (NVR) software to view live video streams and manage recordings.
- Resolution Settings: The camera supports various resolutions and frame rates. Available options include:
- 2592 x 1944 at 15 fps (5MP)
- 2048 x 1536 at 15 fps (3MP)
- 1920 x 1080 at 30 fps (1080p Full HD)
- 1280 x 720 at 30 fps (720p HD)
- 800 x 600 at 30 fps
- 640 x 480 at 30 fps
- 320 x 240 at 15 fps
- Image Enhancement: Adjust settings such as White Balance, Brightness, Contrast, Sharpness, Automatic Gain Control, and Flickerless mode through the web interface to optimize image quality for your environment.
- Wide Dynamic Range (WDR): The camera features Basic WDR (74 dB) to handle scenes with both very bright and very dark areas, ensuring details are visible across the entire image.
5.2 Event Management and Analytics
The E93 camera offers advanced event detection and response capabilities.
- Event Triggers: Configure video motion detection in up to 3 distinct regions within the camera's field of view.
- Event Responses: When an event is triggered, the camera can perform various actions, including:
- Notifying a control center.
- Changing camera settings.
- Commanding other devices.
- Sending email notifications with snapshots.
- Push notifications to mobile devices.
- Saving video to local MicroSD storage.
- Uploading video or snapshots to an FTP server or NVR server.
- Server-based Analytics: The camera supports various server-based analytics for enhanced surveillance, including Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper Detection, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, and People Queue Detection. These features require compatible ACTi software or NVR.
5.3 Security Features
To ensure the security of your surveillance system, the E93 includes:
- IP address filtering.
- HTTPS encryption for secure communication.
- Password-protected user levels.
- Anonymous login option.
- IEEE 802.1X network access control.
6. Maintenance
6.1 Cleaning the Camera
To maintain optimal image quality, periodically clean the camera's dome cover and lens.
- Use a soft, lint-free cloth dampened with a mild cleaning solution (e.g., lens cleaner or water).
- Avoid abrasive cleaners or solvents that could damage the lens or dome material.
- Gently wipe the surfaces to remove dust, smudges, or dirt.
6.2 Firmware Updates
Regularly check the ACTi website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware update package carefully.
6.3 Environmental Considerations
Ensure the camera operates within its specified environmental limits:
- Operating Temperature: -10°C to 50°C (14°F to 122°F)
- Operating Humidity: 10% to 85% RH (non-condensing)
7. Troubleshooting
This section addresses common issues you might encounter with your ACTi E93 camera. For more complex problems, contact ACTi technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Power LED off | No PoE connection or faulty cable. | Verify Ethernet cable connection. Ensure PoE switch/injector is active and supplying power. Try a different Ethernet cable. |
| Cannot access camera via network | Incorrect IP address, network configuration issue, or firewall blocking access. | Use ACTi IP Utility to find the correct IP address. Check network cable. Verify network settings (subnet mask, gateway). Temporarily disable firewall on your PC. |
| Poor image quality | Dirty lens/dome, improper focus (fixed lens, but check for obstructions), incorrect image settings, or insufficient lighting. | Clean the lens and dome. Adjust image settings (brightness, contrast, WDR) in the web interface. Ensure adequate lighting for the scene. |
| Forgot password | Lost administrative credentials. | Press and hold the Reset Button (4) for approximately 10-15 seconds while the camera is powered on to restore factory default settings. This will reset the password to default. Warning: This will erase all custom settings. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | E93 |
| Image Sensor | Progressive Scan CMOS, 1/3.2" |
| Effective Pixels | 2592x1944 (5MP) |
| Lens | Fixed Lens, f1.9mm/F2.8 |
| Horizontal Viewing Angle | 126.9° (overview area) / 77.4° (high detail area) |
| Vertical Viewing Angle | 95.5° |
| Viewing Angle Adjustment | Pan: ±90°, Tilt: 0°-90° |
| Minimum Illumination | Color: 0.1 lux at F2.8 (30 IRE, 2400K) |
| Video Compression | H.264 (Baseline/Main/High profile), MJPEG |
| Digital Noise Reduction | DNR |
| Wide Dynamic Range | Basic WDR (74 dB) |
| Local Storage | MicroSDHC/MicroSDXC card slot |
| Ethernet Port | 1x RJ-45 connector |
| Power Source | PoE Class 2 (IEEE802.3af) |
| Power Consumption | 6W (PoE) |
| Application Environment | Indoor |
| Environmental Casing | Vandal proof (IK10) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Operating Humidity | 10% to 85% RH |
| Dimensions | 4.3" x 2.3" |
| Weight | 0.42 lb |
| ONVIF Compliance | Yes, Profile S, Profile G, Profile T, Profile Q |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your purchase or visit the official ACTi website. ACTi provides technical support and resources for their products.
- Online Resources: Visit the ACTi official website for product documentation, FAQs, and software downloads.
- Technical Support: Contact ACTi technical support for assistance with installation, configuration, or troubleshooting issues. Contact details are typically available on the ACTi website.
