Silverlit 81488AM

Tooko Remote Controlled Construction Crane Instruction Manual

Model: 81488AM

Introduction

Thank you for purchasing the Tooko Remote Controlled Construction Crane. This manual provides essential information for the safe and proper operation, maintenance, and troubleshooting of your new toy. Please read this manual thoroughly before use and retain it for future reference.

Safety Warning: Not suitable for children under 36 months due to small parts. Choking hazard.

Package Contents

Tooko Remote Controlled Construction Crane with remote control and accessories

Image: The complete Tooko Remote Controlled Construction Crane set, including the crane, remote control, and various construction site accessories.

Setup

1. Battery Installation

The Tooko Construction Crane requires 3 x AA batteries (not included) for the crane unit and 3 x AAA batteries (not included) for the remote control. Ensure the power switch is in the OFF position before installing batteries.

  1. Locate the battery compartment on the base of the crane and on the back of the remote control.
  2. Using a screwdriver, open the battery compartment covers.
  3. Insert the batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Replace the battery compartment covers and secure them with the screws.

2. Crane Assembly

The crane comes partially assembled. Follow these steps to complete the assembly:

  1. Attach the main boom to the crane tower.
  2. Ensure all connections are secure.
  3. Place the crane on a flat, stable surface.

Operating Instructions

Once batteries are installed and the crane is assembled, turn the power switch on both the crane and the remote control to the ON position.

Remote Control Functions:

Crane showing horizontal and vertical movement

Image: The crane demonstrating its ability to move the load horizontally along the boom and vertically up and down.

Crane showing 360 degree rotation

Image: The crane's tower rotating 360 degrees, indicating full rotational capability.

Hands holding the remote control for the crane

Image: A close-up of the remote control unit being held, highlighting its buttons and levers for operation.

The crane has an operating range of up to 5 meters and can be used for approximately 60 minutes on a fresh set of batteries.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Crane does not respond to remote control.
  • Batteries are low or incorrectly installed.
  • Power switch is OFF.
  • Interference.
  • Check and replace batteries in both crane and remote control, ensuring correct polarity.
  • Ensure both power switches are ON.
  • Move to an area with less electronic interference.
Movement is sluggish or inconsistent.
  • Low batteries.
  • Obstruction in moving parts.
  • Replace batteries.
  • Check for any debris or obstructions and remove them carefully.
Sound effects not working.
  • Low batteries.
  • Sound button not pressed correctly.
  • Replace batteries.
  • Ensure the sound button is fully depressed.

Specifications

Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer, Silverlit. Please refer to the product packaging for specific contact details or visit the official Silverlit website.

You can visit the Silverlit store on Amazon for more information: Silverlit Store

Related Documents - 81488AM

Preview Build Your First RC Car - Tooko Junior by Silverlit - Assembly and Operation Guide
Comprehensive guide to building and operating the Tooko Junior 'Build My First RC Car'. Includes delivery contents, battery installation, parts identification, assembly steps, and play instructions. Suitable for ages 3+.
Preview Silverlit BumperDrone HD 84813 User Manual
Comprehensive guide to setting up, flying, and troubleshooting the Silverlit BumperDrone HD (Model 84813), including flight controls, battery charging, and safety instructions.
Preview Silverlit BI-WING EVO Remote Control Airplane - Instruction Manual
Comprehensive instruction manual for the Silverlit BI-WING EVO remote control airplane (Model 85739), covering setup, operation, troubleshooting, safety precautions, and battery information.
Preview Robocar Poli ROY Robot Transformation: Instruction Manual | Silverlit
Step-by-step guide for transforming the Robocar Poli ROY toy into its robot form, including safety precautions and assembly instructions.
Preview Robocar Poli Amber Toy Transformation Instructions - Silverlit El-4972a
Step-by-step guide on how to transform the Robocar Poli Amber toy from a car to a robot, including important safety precautions for children aged 3 and up. Features clear instructions and warnings.
Preview Silverlit YCOO RC Helicopter & PUPBO Interactive Robot Puppy Instruction Manual
Comprehensive instruction manual for Silverlit's YCOO RC Helicopter (Model EI-6809) and PUPBO Interactive Robot Puppy (Model EI-8364a), covering setup, operation, safety, and troubleshooting.