Introduction
The Brita Slim Water Filter Pitcher is designed to provide cleaner, great-tasting water by reducing common impurities found in tap water. Its compact design allows it to fit easily into small spaces, such as narrow refrigerator shelves. This manual provides essential information for the proper setup, operation, and maintenance of your Brita water filter pitcher.
Setup
Follow these steps to prepare your Brita water filter pitcher for first use:
- Wash Components: Before first use, hand-wash the pitcher, lid, and filter reservoir with mild soap and rinse thoroughly. Do not wash the filter in a dishwasher.
- Prepare Filter: Submerge the new Brita filter in cold water for 15 seconds to remove any loose carbon particles.
- Insert Filter: Firmly insert the filter into the filter reservoir. Ensure it is seated correctly to prevent unfiltered water from bypassing the filter.
- Fill Reservoir: Place the filter reservoir into the pitcher. Fill the reservoir with cold tap water. The first two pitchers of filtered water may contain carbon dust; discard this water or use it for watering plants.
- Set Filter Indicator: If your pitcher has a sticker filter indicator, apply it to the pitcher and mark the current month. If it has an electronic indicator, press and hold the reset button until the light flashes or changes color, indicating it's reset.
Operation
To use your Brita water filter pitcher:
- Fill: Lift the lid and fill the reservoir with cold tap water. The filter will process the water as it flows into the main pitcher compartment.
- Pour: Once the water has filtered, you can pour clean, filtered water from the spout.
- Storage: Store the pitcher in the refrigerator for chilled, filtered water. Its slim design is ideal for refrigerator doors.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Brita pitcher:
- Filter Replacement: Replace your Brita filter every 40 gallons or approximately every 2 months for the average household. The sticker filter indicator helps track when a replacement is due.
- Cleaning: Hand-wash the pitcher and reservoir regularly with mild detergent. Avoid abrasive cleaners.
- Lid Care: Clean the lid by hand. Do not submerge the electronic indicator (if applicable) in water.
For more information on filter reminders and offers, you can scan the QR code or visit www.brita.com/reminders.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Slow Filtration | Filter may be clogged or nearing end of life. | Replace the filter. Ensure filter is properly seated. |
| Unpleasant Taste/Odor | Filter needs replacement or was not properly prepared. | Prepare a new filter by soaking it for 15 seconds. Replace the old filter. |
| Water Leaks from Filter Area | Filter not seated correctly. | Remove and re-insert the filter, ensuring a snug fit. |
Specifications
- Brand: Brita
- Model Name: Brita Slim
- Item Model Number: 8541998003
- Capacity: 5 Cups
- Product Dimensions: 9.4"L x 4.2"W x 9.1"H
- Item Weight: 0.634 ounces
- Special Feature: Change Filter Indicator
- Installation Type: Freestanding
- Power Source: Manual Winding
- Supported Water TDS Level Maximum (PPM): 500
- UPC: 689358609471, 689358587687
- First Available: June 29, 2018
Warranty and Support
For warranty information, product support, or to purchase replacement filters, please visit the official Brita website or contact Brita customer service. Contact details are typically available on the product packaging or the manufacturer's website.
Manufacturer: Brita
