Exost Loop Gravity Challenge Set User Manual

Introduction

The Silverlit Exost Loop Gravity Challenge Set is an innovative racing system designed for endless creativity and thrilling challenges. This set allows you to build and race without limits, defying gravity with the vehicle's speed through various track configurations.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Exost Loop Gravity Challenge Set. Please read it carefully before use to ensure safe and optimal performance.

Package Contents

• 1 x Exost Loop Remote Controlled Car (rechargeable)
• 1 x Remote Controller
• 31 x Track Tubes (various shapes for building)
• 1 x Recharging Cable for the car
• Instruction Guide (this manual)

Note: 2 x AAA batteries for the remote controller are not included and must be purchased separately.

Setup Instructions

1. Battery Installation (Remote Controller)

1. Locate the battery compartment on the back of the remote controller.
2. Using a small screwdriver, open the battery compartment cover.
3. Insert 2 x AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover and secure it with the screw.

2. Charging the Vehicle

The Exost Loop car is rechargeable. Before first use, fully charge the vehicle.

1. Connect the provided recharging cable to the charging port on the car.
2. Connect the other end of the cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light on the car will illuminate during charging and turn off when fully charged.
4. Charging typically takes approximately 1 hour.

Important: Do not overcharge the vehicle. Disconnect the charging cable once charging is complete.

3. Assembling the Track

The set includes 31 tubes allowing for various track designs, including 2 loops, 1 vertical zone, 1 jump zone, and 1 overtake section. Use your creativity to build different challenging layouts.

Image: The complete Exost Loop Gravity Challenge Set, showcasing an assembled track with loops, the remote-controlled car, and the remote controller.

1. Connect the tube pieces firmly together to form your desired track layout. Ensure all connections are secure to prevent the car from derailing.
2. Experiment with different configurations to create unique challenges.
3. Place the starting gate or a flat section of the track on a stable, flat surface.

Image: An example of a complex track layout, demonstrating how the various tube pieces can be connected to create loops and turns.

Image: A different perspective of an assembled track, highlighting the flexibility in design and the potential for varied challenges.

Operating Instructions

1. Powering On

• Ensure the remote controller has fresh batteries.
• Turn on the power switch on the Exost Loop car. The car's LED light will illuminate.

2. Pairing the Remote Controller

The car and remote should automatically pair when both are powered on. If they do not pair, try turning both off and then on again.

3. Driving the Car

The remote controller features controls for forward, backward, and a 5-second high-speed boost function.

Image: A detailed view of the Exost Loop remote-controlled car, highlighting its sleek design and LED light feature.

• Use the joystick or directional buttons (depending on remote design) to move the car forward or backward.
• Press the "Boost" button for a temporary burst of high speed (up to 8 km/h) to tackle loops and vertical zones.
• The car's LED light provides an excellent lighting effect during operation.

Tip: Practice controlling the car's speed to master gravity-defying maneuvers and navigate challenging track sections.

Typical playtime is over 10 minutes on a full charge.

Maintenance

• Cleaning: Wipe the car and track tubes with a soft, dry cloth. Do not use water or cleaning solvents, as this may damage the electronic components.
• Storage: When not in use, store the set in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: Remove batteries from the remote controller if the set will not be used for an extended period to prevent leakage.
• Charging Cable: Keep the recharging cable free from kinks and damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official SilverLit website. Keep your purchase receipt as proof of purchase.

Manufacturer: Silverlit

Date First Available: 4 September 2018