Intex Prism Frame Premium Above Ground Swimming Pool Set

Safety Information

Important Warnings

• To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities.
• Children must stay away from this product and electrical cord(s).
• Assembly and disassembly by adults only.
• Risk of electric shock. Connect only to a grounding type receptacle, this product is provided with a ground-fault circuit interrupter. If replacement of the plug or cord is needed, use only identical replacement parts.
• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.
• The unit is provided with a ground-fault circuit interrupter (GFCI). To test the GFCI, push the test button. The GFCI should interrupt power. Push the reset button, power should be restored. If the GFCI fails to operate in this manner. The GFCI is defective. If the GFCI interrupts power to the pump without the test button being pushed, a ground current is fl owing, indicating the possibility of an electric shock. Do not use this pump. Disconnect the pump and have the problem corrected by a qualifi ed service representative before using.
• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.
• To reduce the risk of electric shock, the supply cord cannot be replaced. If the cord is damaged, the appliance should be replaced immediately.
• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to connect unit to electric supply; provide a properly located outlet.
• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
• Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI since the ALCI will not protect people.
• Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.
• Make sure the electrical parameters indicated on the product correspond to the local mains voltage before you connect the unit.
• This product is intended to be used only for the purposes described in the manual! FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

Product Overview

The Intex Prism Frame Premium Above Ground Swimming Pool Set offers a durable and convenient solution for backyard aquatic fun. Designed for quick setup and long-lasting use, it features a robust steel frame and puncture-resistant liner.

Key Features:

• Easy to Assemble: Ready for water in just 30 minutes; spread out on level ground with a ground cloth; Enhanced with strong powder-coated steel tubing and our innovative composite T-Joint design makes assembly quick and easy
• The Perfect Size: This round pool measures 12-feet in diameter with a 30-inch depth; holding up to 1,718 gallons of water; this above-ground pool is just right to have summer fun while escaping the heat
• Super-Tough: Made with puncture-resistant 3-Ply PVC material, this pool is built to resist the wear and tear of summer fun; in case of any damage, a patch is included for easy fixes
• Rust Resistant: Our composite T-Joint creates a water-tight seal with the pipe, preventing internal rust from forming; the T-Joints are engineered for high strength and infused with UV inhibitor to ensure weather resistance and long service life
• Krystal Clear Filtration: The included pump filters 530 GPH and incorporates HydroAeration Technology into the cartridge filter pump providing improved circulation and filtration, improved water clarity, and increased negative ions

Figure 1: The Intex Prism Frame Pool set, including the pool, filter pump, and filter cartridge.

Setup Guide

1. Site Preparation

Choose a level, firm surface for your pool. Ensure the area is free from sharp objects, debris, and excessive slopes. A ground cloth (if included or purchased separately) should be spread out before laying the pool liner.

2. Assembling the Frame

Unfold the pool liner and spread it out in the prepared area. Insert the horizontal beams through the sleeves at the top of the liner. Connect these beams using the composite T-Joints. Once the top frame is complete, attach the vertical support legs to the T-Joints, ensuring they pass through the reinforced straps on the liner. This design provides enhanced strength and stability.

Figure 2: Illustration of the innovative T-Joints and galvanized steel frames for durability and easy setup.

Operating Your Pool

1. Filling the Pool

Begin filling the pool with water. As the water level rises, gently smooth out any wrinkles in the bottom of the liner, working from the center outwards. Ensure the pool walls are evenly supported as it fills.

2. Filter Pump Operation

Connect the included 530 GPH cartridge filter pump according to the instructions provided with the pump. This pump utilizes HydroAeration Technology for improved circulation, filtration, and water clarity. Operate the pump daily for 2-10 hour cycles, depending on usage and water conditions, to maintain optimal water quality.

Figure 3: The Krystal Clear Cartridge Filter Pump C530, detailing its features and flow rate.

Maintenance

1. Water Chemistry

Regularly test your pool water for pH, chlorine, and alkalinity levels. Adjust chemicals as needed to maintain balanced water, which is crucial for swimmer comfort and equipment longevity. Follow local guidelines for pool chemical usage.

2. Filter Cleaning and Replacement

The filter cartridge should be rinsed with a garden hose daily or as needed to remove debris. Replace the cartridge every two weeks or sooner if it remains dirty after cleaning, to ensure efficient filtration.

3. Pool Cleaning

Skim the surface daily to remove leaves and other floating debris. Use a pool vacuum to clean the bottom of the pool as necessary. Regularly wipe down the pool walls to prevent algae buildup.

4. Winterization (if applicable)

For prolonged product life, especially in colder climates, it is recommended to drain and disassemble the pool for winter storage. Clean and thoroughly dry all components before storing them in a dry, protected area.

Troubleshooting Common Issues

1. Cloudy Water

• Insufficient Filtration: Ensure the filter pump is running for adequate cycles (e.g., 8-12 hours per day). Clean or replace the filter cartridge.
• Chemical Imbalance: Test and adjust chlorine, pH, and alkalinity levels. Shock the pool if necessary.
• Poor Circulation: Check for blockages in the pump or hoses. Ensure return jets are directed to promote water movement.

2. Algae Growth

• Low Chlorine: Increase chlorine levels and shock the pool.
• Poor Filtration: Clean or replace filter. Run pump for longer periods.
• Brushing: Brush pool walls and floor regularly to dislodge algae.

3. Water Leakage

• Liner Puncture: Inspect the pool liner for small holes or tears. Use the included repair patch for minor damages.
• Loose Connections: Check all hose connections to the pump and pool inlets/outlets for tightness.
• Damaged Components: Inspect hoses, clamps, and pump housing for cracks or damage. Replace faulty parts.

Product Specifications

Figure 4: Detailed specifications including pool dimensions, water capacity, and water depth.

Warranty & Support

Warranty Information

Specific warranty details are typically provided with your product documentation. Please refer to the "User Manual (PDF)" and "Safety Information (PDF)" links for comprehensive warranty terms and conditions.

Customer Support

For any product inquiries, technical assistance, or to purchase replacement parts, please contact Intex customer support. Refer to the contact information provided in your product manual or visit the official Intex website.

Additional Resources:

• Safety Information (PDF)
• User Manual (PDF)
• Visit the Intex Store on Amazon