SHARP XL-B710 All-in-One Audio System User Manual

1. Introduction

Thank you for purchasing the SHARP XL-B710 All-in-One Audio System. This manual provides essential information for the safe and efficient use of your new audio system. Please read it thoroughly before operating the device and retain it for future reference.

2. Safety Information

Please observe the following safety precautions to prevent damage to the device or injury to yourself:

Power Source: Connect the unit only to an AC outlet of the voltage specified on the rating label.
Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
Water and Moisture: Do not expose the unit to rain, moisture, or dripping/splashing liquids. Do not place objects filled with liquids, such as vases, on the unit.
Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Cleaning: Unplug the unit from the wall outlet before cleaning. Use a dry cloth only.
Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items are present in the packaging:

SHARP XL-B710 Audio System Unit
Power Cord
Remote Control (with battery)
FM Antenna
User Manual (this document)

4. Product Overview

Familiarize yourself with the main components and controls of your audio system.

Front Panel

SHARP XL-B710 All-in-One Audio System front view

Figure 4.1: Front view of the SHARP XL-B710 Audio System, showing the main unit with speakers on either side, a central display, and control buttons below the display.

Close-up of SHARP XL-B710 controls and display

Figure 4.2: Close-up of the central control panel, highlighting the LCD display, volume knob, and various function buttons for source selection, playback control, and clock settings.

Rear Panel

The rear panel typically includes connections for power, external antennas, and auxiliary input. Refer to the diagram in your quick start guide for exact port locations.

Remote Control

The included remote control allows convenient operation of all functions from a distance. It features buttons for power, source selection, volume, playback control, and radio tuning.

5. Setup

5.1 Unpacking and Placement

Carefully remove the audio system and all accessories from the packaging.
Place the unit on a stable, flat surface, ensuring there is sufficient space around it for proper ventilation (at least 10 cm from walls or other objects).
Avoid placing the unit near heat sources, direct sunlight, or areas with high humidity or dust.

5.2 Connecting the FM Antenna

Connect the supplied FM antenna to the FM ANTENNA jack on the rear of the unit.
Extend the antenna fully and position it for optimal FM reception.

5.3 Connecting Power

Insert the power cord into the AC IN socket on the rear of the unit.
Plug the other end of the power cord into a suitable wall outlet.

6. Operating Instructions

6.1 Power On/Off

Press the POWER button on the front panel or remote control to turn the unit on or off.

6.2 Source Selection

Press the MODE button on the front panel or remote control repeatedly to cycle through available sources: CD, USB, Bluetooth, FM, AUX.

6.3 CD Playback

Select the CD source.
Open the CD tray and place a CD (audio CD, CD-R, CD-RW) with the label side up.
Close the CD tray. The unit will begin playing automatically or display the track list.
Use the PLAY/PAUSE, SKIP FORWARD, and SKIP BACKWARD buttons for playback control.

6.4 USB Playback

Insert a USB flash drive containing MP3 files into the USB port.
Select the USB source. The unit will scan the drive and begin playing MP3 files.
Use the PLAY/PAUSE, SKIP FORWARD, and SKIP BACKWARD buttons for playback control.

6.5 Bluetooth Pairing

Select the Bluetooth source. The display will show "PAIRING" or similar, indicating it's ready to connect.
On your Bluetooth-enabled device (smartphone, tablet), enable Bluetooth and search for available devices.
Select "SHARP XL-B710" from the list. Once connected, the unit will confirm the pairing.
You can now stream audio wirelessly from your device to the audio system.

6.6 FM Radio Tuning

Select the FM source.
Press the TUNE +/- buttons to manually tune to a station, or press and hold to auto-scan for the next available station.
To save a preset, press the MEMORY button, then use the PRESET +/- buttons to select a preset number, and press MEMORY again to confirm.

6.7 AUX Input

Connect an external audio device (e.g., MP3 player, TV) to the AUX IN port on the rear of the unit using a 3.5mm audio cable (not supplied).
Select the AUX source.
Play audio from your connected device.

6.8 Volume Control

Rotate the VOLUME knob on the front panel or use the VOLUME +/- buttons on the remote control to adjust the sound level.

7. Maintenance

7.1 Cleaning

Always unplug the unit from the power outlet before cleaning.
Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents.
For the CD lens, use a specialized CD lens cleaner disc (not supplied).

7.2 Storage

If storing the unit for an extended period, unplug it from the power outlet and store it in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter any issues, refer to the following table for common problems and solutions.

Problem	Possible Cause	Solution
No power	Power cord not connected; Power outlet faulty	Ensure power cord is securely connected; Try a different outlet
No sound	Volume too low; Incorrect source selected; Mute activated	Increase volume; Select correct source; Deactivate mute
Bluetooth not connecting	Device not in pairing mode; Out of range; Already connected to another device	Ensure unit is in Bluetooth pairing mode; Move device closer; Disconnect from other devices
CD not playing	CD inserted incorrectly; CD dirty or scratched; Disc format not supported	Reinsert CD correctly; Clean or replace CD; Ensure it's an audio CD or MP3 CD
Poor FM reception	Antenna not positioned correctly; Weak signal	Adjust antenna position; Try relocating the unit

9. Specifications

Model: SHARP XL-B710
Power Output: 90 Watts
Connectivity: Bluetooth, USB, Auxiliary (3.5mm), FM Radio
Supported Formats: CD, CD-R, CD-RW, MP3 (via USB/CD)
Speaker Type: Stereo
Dimensions (L x W x H): 23.2 x 36.6 x 11 cm (approximately 9.1 x 14.4 x 4.3 inches)
Weight: 2.8 kg (approximately 6.2 lbs)
Power Source: AC (Mains)

10. Warranty and Support

10.1 Warranty Information

This SHARP XL-B710 Audio System comes with a 2-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and faults under normal use conditions.

10.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact SHARP customer support. Refer to the contact information provided in your product packaging or visit the official SHARP website for your region.

	Sharp XL-B710 Series Micro System User Manual Comprehensive user manual for the Sharp XL-B710 Series micro system, covering setup, operation, features, troubleshooting, and technical specifications. Includes models XL-B710(BK), XL-B710(WH), and XL-B710(BR).
	Sharp XL-B514 Tokyo FM Hi-Fi Micro System User Manual Comprehensive user manual for the Sharp XL-B514 Tokyo FM Hi-Fi Micro System, covering setup, operation, features, safety instructions, and troubleshooting.
	Sharp XL-B517D Micro Component System User Manual This user manual provides comprehensive instructions for the Sharp XL-B517D Micro Component System, detailing setup, operation, features like Bluetooth, CD playback, DAB/FM radio, and USB connectivity. It also includes important safety information and troubleshooting tips.
	SHARP XL-UH242 Micro Component System Operation Manual Official operation manual for the SHARP XL-UH242 Micro Component System, providing detailed instructions on setup, operation, features, safety, troubleshooting, and specifications.
	Sharp XL-B520D/XL-B720D Firmware Upgrade Manual Comprehensive guide for Sharp XL-B520D(BK) and XL-B720D(BK) audio systems, detailing how to check for firmware updates, prepare a USB drive, and perform the upgrade process to resolve issues like CD playback problems.
	Sharp XL-B517D Micro Component System User Manual This user manual provides comprehensive instructions for the Sharp XL-B517D Micro Component System, covering setup, operation, safety, troubleshooting, and technical specifications.

Sharp XL-B710