1. Introduction
This manual provides essential instructions for the safe and efficient operation of your LogiLink PA0161 Universal Power Supply. Please read this manual thoroughly before use and retain it for future reference.
The LogiLink PA0161 is a versatile 24W universal power supply designed to power various electronic devices and home appliances. It includes 7 interchangeable adapter tips and offers multiple voltage settings to ensure compatibility with a wide range of equipment.
2. Safety Instructions
- Ensure the power supply is disconnected from the mains before connecting or disconnecting any devices.
- Verify the correct voltage and adapter tip are selected for your device to prevent damage. Refer to your device's specifications.
- Do not expose the power supply to moisture, rain, or extreme temperatures.
- Do not disassemble or attempt to repair the unit. Refer servicing to qualified personnel.
- Keep out of reach of children.
- The power supply is equipped with overcurrent, overvoltage, overheating, and short circuit protection. However, always use it responsibly.
3. Package Contents
- 1 x LogiLink PA0161 Universal Power Supply Unit
- 7 x Interchangeable Adapter Tips
- 1 x Voltage Adjustment Key
- 1 x Instruction Manual (this document)
Image 3.1: Overview of the LogiLink PA0161 Universal Power Supply, including the main unit, attached cable, 7 interchangeable adapter tips on a holder, and the voltage adjustment key.
4. Product Overview
The LogiLink PA0161 features a compact design with a fixed power cable and a rotating voltage selector. The interchangeable adapter tips allow for broad compatibility.
Image 4.1: A close-up view of the seven interchangeable adapter tips, showing various sizes and shapes for different device input ports. These tips are designed to connect to the main power cable.
5. Setup and Operation
5.1. Selecting the Correct Voltage
- Identify the required input voltage for your device. This information is usually found on the device itself, its original power adapter, or in its instruction manual. The PA0161 supports output voltages of 3V, 4.5V, 5V, 6V, 7.5V, 9V, and 12V.
- Locate the voltage selector dial on the bottom of the power supply unit.
- Use the provided adjustment key (or a small flat-head screwdriver) to rotate the dial until the arrow points to the desired voltage setting.
Image 5.1: A close-up of the LogiLink PA0161 power supply unit, showing the voltage selector dial on the bottom. A small black key is inserted into the dial, indicating the process of adjusting the output voltage.
5.2. Attaching the Correct Adapter Tip
- Identify the correct adapter tip that fits your device's power input port. Compare the tip sizes and shapes with your device's port.
- Ensure the power supply is NOT plugged into a wall outlet.
- Connect the chosen adapter tip firmly to the output connector of the power supply cable. Ensure a secure fit.
Image 5.2: This image shows the process of connecting one of the interchangeable adapter tips to the main output cable of the LogiLink PA0161 power supply. The tip is being inserted into the cable's connector.
5.3. Connecting to Your Device and Powering On
- With the correct voltage selected and adapter tip attached, connect the adapter tip to your device's power input port.
- Plug the LogiLink PA0161 power supply into a standard AC 100-240V wall outlet.
- Your device should now receive power. If not, double-check all connections and voltage settings.
6. Maintenance
- Cleaning: Disconnect the power supply from the wall outlet and your device before cleaning. Use a soft, dry cloth to wipe the unit. Do not use liquid cleaners or solvents.
- Storage: Store the power supply and adapter tips in a cool, dry place away from direct sunlight and moisture when not in use.
- Cable Care: Avoid bending or kinking the power cable excessively. Do not place heavy objects on the cable.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Incorrect voltage selected. | Verify and adjust the voltage setting to match your device's requirements. |
| Device not powering on. | Incorrect adapter tip used. | Ensure the adapter tip fits securely and is compatible with your device's input port. |
| Device not powering on. | Loose connection. | Check all connections: wall outlet, power supply to device, and adapter tip to cable. |
| Power supply feels warm. | Normal operation under load. | A slight warmth is normal. If it becomes excessively hot, disconnect immediately and check for overloads or short circuits. |
8. Specifications
- Model: PA0161
- Input: AC 100-240V, 50/60Hz, 1A max
- Output: DC 3V/4.5V/5V/6V/7.5V/9V/12V, 2A, 24W max
- Cable Length: 1.5 m
- Protection Features: Overcurrent, Overvoltage, Overheating, Short Circuit
- Product Dimensions: 1.81 x 1.42 x 3.62 inches
- Item Weight: 4.5 ounces
- Manufacturer: 2direct GmbH
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact LogiLink customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official LogiLink website or contact your local distributor.
