Introduction
The SKIL Rechargeable 4V Cordless Screwdriver is designed for everyday use, offering convenience and efficiency for various household tasks. Featuring patented Circuit Sensor Technology, an integrated rechargeable Lithium-Ion battery, and a comprehensive 45-piece bit set, this tool is an essential addition to any toolkit. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Image: The SKIL 4V Cordless Screwdriver kit, including the screwdriver, 45-piece bit set, and USB charging cable, neatly organized within its durable carrying case.
Setup
Charging the Screwdriver
Your SKIL 4V Cordless Screwdriver comes with an integrated rechargeable Lithium-Ion battery. Before first use, fully charge the screwdriver. Use the provided USB charging cable to connect the screwdriver to a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status. A full charge ensures maximum performance and runtime.
Installing Bits
The screwdriver features a 1/4-inch hex chuck for quick and easy bit changes. To install a bit, simply push the desired bit firmly into the chuck until it clicks into place. To remove a bit, pull it straight out. The included 45-piece bit set provides a wide variety of bits for different screw types and applications.
Operating Instructions
Forward and Reverse Operation
To operate the screwdriver, rotate the collar located near the chuck. Turn the collar clockwise for forward (tightening) rotation and counter-clockwise for reverse (loosening) rotation. The direction indicator on the collar will align with the corresponding arrow.
LED Work Light
The screwdriver is equipped with a dual LED work light that illuminates the work area. The lights automatically activate when the screwdriver is in operation (either forward or reverse), providing improved visibility in dimly lit spaces.

Image: The screwdriver's dual LED work light provides clear illumination for tasks in low-light conditions, as demonstrated while working on a wall switch.
Circuit Sensor Technology
The patented Circuit Sensor Technology detects live electrical current in outlets, switches, cords, and fixtures from up to one inch away. To use this feature, hold the screwdriver near the suspected source of electricity and press the detection button (indicated by a lightning bolt symbol). If a live circuit is detected, a red light will illuminate and an audible alert will sound. This feature helps ensure safety by identifying live circuits before you begin work.

Image: The Circuit Sensor Technology in action, showing the screwdriver detecting live wires in an electrical fixture, with a red light indicating the presence of current.
Maintenance
To ensure the longevity and optimal performance of your SKIL Cordless Screwdriver, follow these maintenance guidelines:
- Cleaning: Regularly wipe down the tool with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Bit Care: Keep the bit set clean and free of debris. Store bits in their designated slots within the carrying case to prevent loss and damage.
- Battery Storage: For long-term storage, ensure the battery is partially charged (around 50%). Store the tool in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Overloading: Do not force the screwdriver beyond its intended capacity. This can damage the motor and reduce battery life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver not turning on | Battery is depleted | Charge the screwdriver using the provided USB cable. |
| Bit slips or does not engage screw head | Incorrect bit size/type; Worn bit; Bit not fully inserted | Ensure you are using the correct bit for the screw head. Replace worn bits. Push the bit firmly into the chuck until it clicks. |
| Circuit Sensor not detecting live wires | Not pressing detection button; Distance too far; No live current | Ensure the detection button is pressed. Hold the screwdriver within one inch of the source. Verify if the circuit is indeed live. |
| Reduced power or speed | Low battery; Overheating; Obstruction | Recharge the battery. Allow the tool to cool down. Check for any obstructions preventing smooth operation. |
Specifications
- Brand: Skil
- Model Name: Rechargeable 4V Cordless Screwdriver
- Model Number: SD561204
- Voltage: 4 Volts
- Speed: 230 RPM
- Torque: 0.9 Inch Pounds
- Battery Type: Lithium Ion (integrated)
- Battery Capacity: 1.5 Amp Hours
- Power Source: Battery Powered
- Special Features: Cordless, Rechargeable, Circuit Sensor Technology, Dual LED Light
- Included Components: Slim Magnetic Bit Collar, 4V Screwdriver with Circuit Sensor™ Technology, 16pc 1'' bits, USB Charging Cable, 7pc 2'' slim bits, 20pcs 1'' security bits, 60mm Magnetic Bit Holder
- Item Weight: 1.68 Pounds
- Product Dimensions: 6.89 x 4.72 x 2.8 inches
- Country of Origin: China
Warranty and Support
The SKIL Rechargeable 4V Cordless Screwdriver comes with a 5-Year Limited Warranty. For detailed warranty information, service, or support, please refer to the official user manual PDF or visit the manufacturer's website.
You can access the full User Manual (PDF) here.