Introduction
Thank you for choosing the PROSCAN Retro Style Portable CD Boombox. This versatile audio system combines classic design with modern functionality, allowing you to enjoy your favorite music from CDs, AM/FM radio, or external devices via the Aux-in jack. This manual provides essential information for setting up, operating, and maintaining your boombox to ensure years of listening pleasure.
Key Features
- Retro Design: Classic aesthetic with built-in stereo speakers for superb sound quality.
- Portable & Efficient: Compact size and folding handle for easy transport and use anywhere.
- AM/FM Stereo: Integrated analog AM/FM tuner with a long antenna for clear radio reception.
- Wide Compatibility: Features a top-loading CD/CD-R/CD-RW player and a 3.5mm AUX input jack for connecting smartphones, MP3 players, or other audio devices.
- User-Friendly Controls: Tone-touch function buttons for CD playback (shuffle, skip, program) and intuitive volume/tuning knobs.
- Dual Power Options: Operates via the included AC wall adapter or 6 x 'C' batteries (not supplied) for total mobility.
- LCD Display: Clear LED display for CD function and track information.
- Programmable Memory: 20-track programmable memory for customized CD playback sequences.
Setup
Powering the Unit
Your PROSCAN Boombox can be powered by either AC electricity or batteries.
AC Power (Recommended for stationary use)
- Locate the AC power input jack on the back of the unit.
- Insert the small end of the supplied AC wall adapter into the AC input jack.
- Plug the other end of the AC adapter into a standard 120V-60Hz wall outlet.
Battery Power (For portable use)
- Turn the unit upside down to access the battery compartment.
- Open the battery compartment cover.
- Insert 6 x 'C' size batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Figure 1: Side view of the boombox, highlighting the battery compartment and power input.
Operating Instructions
General Controls
- Power Switch: Located on the side of the unit, slide to turn the boombox ON or OFF.
- Volume Knob: Rotate the silver knob on the top left to adjust the sound volume.
- Function Selector: Slide the switch on the side to select between CD, AM, FM, or AUX modes.
Figure 2: Front view of the boombox, showing the main controls and display.
CD Player Operation
- Ensure the Function Selector is set to 'CD'.
- Press the 'OPEN/CLOSE' button on the front of the unit to open the CD compartment.
- Carefully place a CD (CD, CD-R, or CD-RW) onto the spindle with the label side facing up.
- Close the CD compartment firmly until it clicks.
- The LCD display will show the total number of tracks. Press the 'PLAY/PAUSE' button to begin playback.
- Use the 'SKIP/SEARCH' buttons to navigate between tracks.
- To program tracks, press the 'PROGRAM' button, select your desired track using 'SKIP/SEARCH', then press 'PROGRAM' again to confirm. Repeat for up to 20 tracks. Press 'PLAY' to start the programmed sequence.
AM/FM Radio Operation
- Ensure the Function Selector is set to 'AM' or 'FM'.
- Extend the telescopic FM antenna for optimal FM reception. For AM, rotate the unit for best reception.
- Rotate the 'TUNING' knob on the top right to select your desired radio station. The analog dial will indicate the frequency.
Aux-in Operation
- Ensure the Function Selector is set to 'AUX'.
- Connect one end of a 3.5mm audio cable (not included) to the AUX-in jack on the unit.
- Connect the other end of the audio cable to the headphone jack or audio output of your external device (e.g., smartphone, MP3 player).
- Play audio from your external device. The sound will be output through the boombox speakers.
Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- CD Care: Handle CDs by their edges. Keep them clean and free of scratches.
- Battery Care: Remove batteries if the unit will not be used for an extended period to prevent leakage.
- Placement: Avoid placing the unit in direct sunlight, near heat sources, or in dusty/humid environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | AC adapter not connected, batteries depleted/incorrectly inserted. | Check AC connection; replace batteries or ensure correct polarity. |
| CD skipping or not playing | CD is dirty, scratched, or inserted incorrectly. | Clean CD with a soft cloth; try another CD; ensure CD is seated properly. |
| Poor radio reception | Antenna not extended, weak signal. | Fully extend FM antenna; rotate unit for AM reception; try moving to a different location. |
| No sound from Aux-in | Cable not connected properly, external device volume low. | Ensure Aux-in cable is fully inserted; increase volume on both boombox and external device. |
Specifications
- Model Number: PRCD212-RED_AMZ
- Product Dimensions (L x W x H): 5.5 x 10.5 x 9.5 inches
- Item Weight: 2.95 pounds
- Power Source: AC 120V-60Hz or 6 x 'C' batteries (DC 9V)
- Output Power: 1.2 W x 2
- Connectivity: CD, Auxiliary
- Speaker Type: Stereo
- Color: RED
- Manufacturer: Curtis
- Country of Origin: China
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or contact PROSCAN customer service. Keep your proof of purchase for any warranty claims.
Important Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
