ECONTROLLY RCEC-818A

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Instruction Manual for ECONTROLLY Replacement Remote Control

Model: RCEC-818A

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your new ECONTROLLY AA59-00818A Replacement Remote Control. This remote is designed to replace various Samsung TV remote models, including AA59-00817A and AA59-000629A, and is compatible with a wide range of Samsung TV models such as HG24AD470FW, HG26AA470PW, HG32AA470PW, HG32AA690NW, and HG32AB460GW, among others. Please read this manual thoroughly to ensure proper use and longevity of your remote control.

Setup

Battery Installation

The remote control requires two (2) AAA batteries for operation. No programming or pairing is required; simply install the batteries, and the remote will be ready for use.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch (if present) to open the compartment.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Back of the remote control with battery compartment open, showing two AAA battery slots.

Figure 1: Battery compartment of the remote control, showing the slots for two AAA batteries.

Operating Instructions

This remote control provides full functionality for compatible Samsung TVs. Point the remote directly at the TV's infrared receiver for optimal performance. The effective transmitting distance is approximately 8-10 meters (26-33 feet).

Front view of the ECONTROLLY replacement remote control for Samsung TVs, showing all buttons.

Figure 2: Front view of the remote control with all buttons labeled.

Key Functions

  • POWER (●): Turns the TV on or off.
  • SOURCE: Selects input sources (HDMI, AV, Component, etc.).
  • Number Buttons (0-9): Directly selects channels.
  • VOL (+/-): Adjusts the volume level.
  • CH (▲/▼): Changes channels up or down.
  • MUTE: Mutes or unmutes the TV sound.
  • MENU: Accesses the TV's main menu.
  • HOME: Returns to the Smart Hub or main home screen.
  • TOOLS: Displays a quick menu with common functions.
  • INFO: Displays information about the current program or input.
  • Navigation Buttons (▲ ▼ ◀ ►): Navigates through menus and options.
  • ENTER: Confirms a selection.
  • RETURN: Returns to the previous screen or menu.
  • EXIT: Exits the current menu or application.
  • Color Buttons (A, B, C, D): Used for specific functions within certain applications or menus, as indicated on the TV screen.
  • Play/Pause/Stop/Fast Forward/Rewind: Controls media playback.

Maintenance

Cleaning the Remote Control

To maintain the remote control's appearance and functionality, clean it regularly:

  • Use a soft, dry cloth to wipe the surface of the remote control.
  • For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
  • Avoid using harsh chemicals, solvents, or abrasive cleaning materials, as these can damage the remote's finish or internal components.

Battery Replacement

Replace the batteries when the remote control's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

Troubleshooting

Problem Possible Cause / Solution
Remote control is not working.
  • Check if the batteries are installed correctly with the correct polarity.
  • Replace old batteries with new AAA alkaline batteries.
  • Ensure there are no obstructions between the remote control and the TV's infrared receiver.
  • Make sure you are within the effective operating range (8-10 meters).
Remote control range is poor.
  • Replace the batteries.
  • Ensure there is a clear line of sight to the TV.
  • Avoid strong light sources (e.g., direct sunlight) that might interfere with the infrared signal.
Certain buttons do not respond.
  • This remote is a direct replacement and should function without programming. If specific buttons do not work, ensure your TV model is listed as compatible.
  • Clean the remote control, especially around the unresponsive buttons, to remove any debris.

Specifications

Model Number RCEC-818A
Compatible Replacement Models AA59-00818A, AA59-00817A, AA59-000629A, and others listed in product description.
Power Source 2 x AAA Batteries (not included)
Material ABS Environmental Protection Material
Dimensions 7 x 2 x 0.65 inches (17.78 x 5.08 x 1.65 cm)
Item Weight 1 ounce (28.35 grams)
Color Black
Effective Distance Approx. 8-10 meters (26-33 feet)

Warranty Information

Specific warranty details for this product are not provided in the available information. Please refer to the seller's or manufacturer's official website for any applicable warranty policies or contact their customer support directly for inquiries regarding product warranty.

Customer Support

For further assistance or technical support, please contact the seller or manufacturer directly. Contact information may be available on the product packaging or the retailer's website where the product was purchased.

© 2024 ECONTROLLY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.