KORG CM-300

Korg CM-300 Clip-on Contact Microphone Instruction Manual

Introduction

Welcome to your Korg CM-300 Clip-on Contact Microphone. This manual provides essential information for the proper setup, operation, and maintenance of your device. The CM-300 is designed to accurately capture instrument vibrations for precise tuning, even in noisy environments.

Korg CM-300 Contact Microphone banner

An overview image of the Korg CM-300 Contact Microphone with the Korg logo.

What's Included

  • Korg CM-300 Contact Microphone

Setup Instructions

Attaching the Microphone

The CM-300 features a secure multi-instrument clip designed to attach firmly to various instruments.

  1. Open the clip: The clip opens up to 1.2 inches (30mm).
  2. Position: Attach the clip to a suitable part of your instrument where vibrations are strong, such as the bell of a brass instrument, the bridge of a string instrument, or the headstock of a guitar/ukulele.
  3. Secure: Ensure the specially shaped rubber grips are making good contact with the instrument surface for stable attachment.
Korg CM-300 attached to a clarinet

A close-up view of the Korg CM-300 contact microphone clipped onto the bell of a clarinet, illustrating proper attachment.

Connecting to a Tuner

The CM-300 connects to your tuner via its standard 1/4-inch (6.35mm) phone plug.

  1. Insert the plug: Carefully insert the 1/4-inch plug into the input jack of your compatible tuner.
  2. Ensure a secure connection: Make sure the plug is fully inserted to avoid signal loss.
Korg CM-300 with cable and 1/4-inch plug

The Korg CM-300 contact microphone with its cable and 1/4-inch plug, ready for connection to a tuner.

Operating Instructions

The Korg CM-300 is a passive contact microphone that transmits vibrations directly to your tuner.

  • Power: The microphone does not require external power. It operates passively, drawing power if needed from the connected tuner.
  • Tuning: Once connected and attached, play your instrument. The high-precision piezo sensor in the CM-300 will capture the vibrations, sending them to your tuner for accurate pitch detection.
  • Environment: The design ensures accurate tuning even in environments with ambient noise, as it focuses on instrument vibrations rather than air-borne sound.

Best Practices

  • For optimal performance, ensure the microphone is securely attached and not loose.
  • Avoid placing the microphone in areas that might dampen vibrations or cause interference.

Care and Maintenance

  • Cleaning: Wipe the microphone and cable with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the microphone in a clean, dry place, away from extreme temperatures and direct sunlight.
  • Cable Care: The redesigned cable is durable, but avoid sharp bends or excessive pulling to prevent damage. Do not wrap the cable too tightly.
Multiple Korg CM-300 microphones in different colors

Various Korg CM-300 contact microphones, highlighting their robust construction and cable design.

Troubleshooting

ProblemPossible CauseSolution
No signal to tunerLoose connectionEnsure the 1/4-inch plug is fully inserted into the tuner.
No signal to tunerMicrophone not properly attachedRe-attach the clip firmly to a vibrating part of the instrument.
Inaccurate tuningExternal noise interferenceWhile the CM-300 is designed for noisy environments, ensure the microphone is securely attached and not picking up excessive ambient noise if possible.
Inaccurate tuningFaulty cable/microphoneTest with another known-good tuner or microphone if available. Contact support if issues persist.

Product Specifications

FeatureDetail
BrandKORG
Model NameCM-300
Connectivity TechnologyWired (1/4-inch Phone Plug)
Special FeatureDurable, High-Precision Piezo Pickup
Compatible DevicesTuners, various musical instruments (Guitar, Bass, Brass, Strings, Ukulele, etc.)
ColorWhite & Black (CM300WHBK)
Included ComponentsMicrophone
Microphone Form FactorMini Clip-on
Item Weight0.04 Kilograms
Item Dimensions3.3 x 4.8 x 1.1 inches
Enclosure MaterialMetal, Plastic
Clip Maximum Width1.2 inches (30mm)

Warranty Information

The Korg CM-300 Clip-on Contact Microphone comes with a 5-year warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Korg website or contact customer support.

Customer Support

For further assistance, technical support, or warranty inquiries, please visit the official KORG website or contact their customer service department.

Official KORG Website: www.korg.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.