Lacnooe GY6.35-SG-48-DW-5PCS
Contents
Lacnooe GY6.35 LED Bulb Instruction Manual
Model: GY6.35-SG-48-DW-5PCS
1. Introduction
Thank you for choosing Lacnooe GY6.35 LED Bulbs. These 4-watt LED bulbs are designed as energy-efficient replacements for traditional 25-30 watt halogen bulbs, offering significant energy savings and a long operational lifespan. They feature a standard GY6.35 bi-pin base and provide 6000K Daylight White illumination with a 360-degree beam angle.
These bulbs are ideal for various low-voltage 12V applications, including landscape lighting, under cabinet lighting, pendant lighting, and fixtures in RVs, boats, and general household use.

Image 1.1: A pack of five Lacnooe GY6.35 LED bulbs, showcasing their compact design and bi-pin base.

Image 1.2: Lacnooe GY6.35 LED Bulbs illuminating a modern kitchen, demonstrating their application in home lighting.
2. Important Safety Information
- Voltage Compatibility: These bulbs are designed ONLY for low voltage AC/DC 12-volt lighting fixtures. Do NOT use them with any 110-130V or 220-240V (high voltage) lighting systems, as this will cause the bulb to burn out immediately and may pose a safety risk.
- Non-Dimmable: This GY6.35 LED bulb is a non-dimmable design. Do NOT match it with any dimmers. Using it with a dimmer will cause flickering, buzzing noise, or damage to the bulb.
- Installation: Always ensure the power is turned off before installing or removing bulbs to prevent electric shock.
- Handling: Handle bulbs by their base to avoid touching the glass or LED components directly, which can reduce lifespan or affect performance.
- Heat: While LED bulbs produce less heat than halogens, ensure adequate ventilation around the fixture.

Image 2.1: Visual warning indicating that the bulb is non-dimmable.

Image 2.2: Visual warning indicating that the bulb is only for 12V low voltage applications.
3. Product Specifications
| Feature | Specification |
|---|---|
| Model Number | GY6.35-SG-48-DW-5PCS |
| Base Type | GY6.35 Bi-pin (6.35mm pin distance) |
| Wattage | 4 Watts |
| Incandescent Equivalent | 25-30 Watts |
| Voltage | AC/DC 12 Volts |
| Light Color | Daylight White |
| Color Temperature | 6000 Kelvin |
| Brightness | 330 Lumen |
| Color Rendering Index (CRI) | 80+ |
| Beam Angle | 360 Degrees |
| Material | Silica Gel |
| Dimensions (W x H) | 13mm (0.51") x 38mm (1.5") |
| Special Features | Non-Dimmable, Zero flicker (with compatible transformer), No buzzing sound, Instant on, Low heat |

Image 3.1: Detailed dimensions of the GY6.35 LED bulb and a comparison of pin distances for G4, GY6.35, and G8 bases. Please verify your fixture's base type before purchase.

Image 3.2: Internal components of the bulb, highlighting the 48*4014SMD LED chips and the high-quality clear silica gel material for heat dissipation.
4. Installation
- Power Off: Before attempting any installation, ensure the power supply to the lighting fixture is completely turned off at the circuit breaker or wall switch.
- Verify Base Type: Confirm that your fixture uses a GY6.35 bi-pin base. The pin distance for GY6.35 is 6.35mm (0.25 inches). Refer to Image 3.1 for visual confirmation.
- Check Dimensions: Please note that this LED bulb (13mm x 38mm) may be slightly larger than traditional halogen bulbs. Verify that there is sufficient space within your fixture for the new LED bulb. Refer to Image 4.1 for a size comparison.
- Insert Bulb: Carefully align the two pins of the LED bulb with the corresponding holes in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Restore Power: Once the bulb is securely installed, restore power to the fixture.

Image 4.1: Size comparison between the GY6.35 LED bulb and a traditional GY6.35 halogen bulb. The LED bulb is slightly wider.
Video 4.2: An official product video demonstrating the physical characteristics and general application of the Lacnooe GY6.35 LED bulb.
5. Operation
Operating the Lacnooe GY6.35 LED bulb is straightforward. Once properly installed in a compatible 12V fixture, simply turn on the power switch to illuminate the bulb. The bulb provides instant-on brightness without any warm-up time.
- Instant On: The bulb reaches full brightness immediately upon activation.
- Non-Dimmable: As stated in the safety section, these bulbs are not designed for use with dimmers. Attempting to dim them may result in flickering or damage.

Image 5.1: Key features of the bulb, emphasizing its energy efficiency, long lifespan, 360-degree beam angle, and eco-friendly design.

Image 5.2: Illustration of the Color Rendering Index (CRI) 80+ rating, indicating accurate color representation under the bulb's light.
6. Maintenance
Lacnooe GY6.35 LED bulbs are designed for long-term, maintenance-free operation. However, general care can help ensure optimal performance and longevity:
- Cleaning: If cleaning is necessary, ensure the power is off and the bulb has cooled. Gently wipe the bulb with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
- Replacement: Due to their long lifespan, frequent replacement is not expected. If a bulb needs replacement, follow the installation steps outlined in Section 4.
7. Troubleshooting
7.1. Bulb is Flickering or Buzzing
This is the most common issue when replacing halogen bulbs with LEDs, especially if the existing transformer or dimmer is not compatible with LED technology.
- Incompatible Dimmer: These bulbs are non-dimmable. If connected to a dimmer switch, flickering or buzzing will occur. Ensure the bulb is connected to a standard on/off switch.
- Incompatible Transformer: Halogen lighting systems often use electronic transformers designed for a higher minimum load. LED bulbs have a very low wattage (4W), which may not meet the minimum load requirement of older halogen transformers, leading to flickering.
- Solution: To resolve flickering caused by an incompatible transformer, replace your existing 12V transformer with an LED-compatible 12V transformer. These transformers are designed to work efficiently with the low wattage of LED bulbs.

Image 7.1: Visual comparison demonstrating the absence of flicker with Lacnooe GY6.35 bulbs when used with appropriate power sources, versus flickering observed with other bulbs.
7.2. Bulb Does Not Light Up
- Check Power: Ensure the power supply to the fixture is on.
- Proper Installation: Verify that the bulb is fully and correctly inserted into the socket.
- Voltage Mismatch: Confirm that your fixture is 12V. Using the bulb in a 120V fixture will immediately damage it.
- Faulty Bulb: If other bulbs in the same fixture work, the specific bulb might be faulty. Try a different bulb from the pack.
7.3. Bulb Dims or Has Short Lifespan
- Overheating: Ensure the fixture allows for adequate air circulation around the bulb. Enclosed fixtures without proper ventilation can lead to premature failure.
- Voltage Fluctuations: Unstable 12V power supply can affect bulb performance and lifespan.
- Transformer Compatibility: As mentioned in flickering, an incompatible transformer can also lead to premature failure or dimming.
8. Warranty and Support
Lacnooe stands behind the quality of its products. For any questions, concerns, or issues regarding your GY6.35 LED bulbs, please contact Lacnooe customer support. Please refer to your purchase documentation or the retailer's website for specific warranty terms and contact information.
You can visit the official Lacnooe store on Amazon for more information and support: Lacnooe Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.