NEC LED Ceiling Light Remote Control RE0101 User Manual

1. Introduction

This manual provides detailed instructions for the NEC LED Ceiling Light Remote Control, model RE0101. This remote is designed to operate compatible NEC LED ceiling light fixtures, offering convenient control over various lighting functions. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.

2. Setup

2.1. Battery Installation

The NEC RE0101 remote control is battery-operated. Batteries are sold separately and are required for operation.

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover open in the direction indicated by the arrow.
3. Insert two AAA batteries (not included), ensuring the correct polarity (+ and -) as marked inside the compartment.
4. Close the battery compartment cover securely until it clicks into place.

Note: Always use new batteries of the same type. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.

2.2. Pairing with LED Ceiling Light

Typically, NEC remote controls are pre-paired with their corresponding LED ceiling lights. If your remote does not operate the light fixture after battery installation, follow these general pairing steps:

1. Ensure the LED ceiling light is powered on at the main wall switch.
2. Within 30 seconds of turning on the light, point the remote control towards the light fixture.
3. Press and hold the ON/OFF button on the remote for approximately 5 seconds.
4. The light fixture should blink or respond, indicating successful pairing.

Note: Refer to your specific NEC LED ceiling light fixture's manual for precise pairing instructions, as procedures may vary slightly by model.

3. Operating Instructions

The NEC RE0101 remote control features a stylish design with an LCD screen and clearly labeled buttons for intuitive control of your LED ceiling light. Below is an overview of its functions:

Image 1: NEC RE0101 Remote Control. This image displays the remote control with various features labeled. The top features a convenient LCD screen showing time and dimming status. Below the screen are three light mode buttons: Active, Natural, and Relax. The central area includes the main ON/OFF button, surrounded by dimming up/down controls and a luminous display for dark environments. Additional buttons include an Absence Timer (ON/OFF timer) and a Night Light button. On the right side, labels indicate Dimming UP (10 levels, night light 7 levels), Sleep Timer (60 min / 30 min OFF timer), and Dimming DOWN (10 levels, night light 7 levels).

3.1. Key Features and Functions

• LCD Screen: Displays the current time and the dimming status of the light. This convenient feature allows for quick visual confirmation of settings.
• ON/OFF Button: The central button to turn the LED ceiling light on or off.
• Dimming UP (調光UP): Increases the brightness of the light. Offers 10 levels of adjustment for general lighting and 7 levels for the night light function.
• Dimming DOWN (調光DOWN): Decreases the brightness of the light. Offers 10 levels of adjustment for general lighting and 7 levels for the night light function.
• 3 Light Modes: Select from three preset lighting modes to suit your activity or mood:
  • Active (アクティブ): Provides bright, invigorating light suitable for work or focused tasks.
  • Natural (ナチュラル): Offers a balanced, comfortable light ideal for everyday activities.
  • Relax (リラックス): Delivers a warm, soft light perfect for unwinding and relaxation.
• Night Light Button (常夜灯ボタン): Activates a low-level night light, providing subtle illumination. The brightness of the night light can be adjusted using the Dimming UP/DOWN buttons (7 levels).
• Luminous Display (蓄光表示): Certain parts of the remote control glow in the dark, making it easy to locate and operate in low-light conditions.
• Sleep Timer (おやすみタイマー): Sets the light to automatically turn off after a specified period. Options typically include 60 minutes and 30 minutes. Press the button to cycle through the available timer settings.
• Absence Timer (留守タイマー): An ON/OFF timer function designed to simulate occupancy by turning the light on and off at set intervals. Consult your ceiling light's manual for specific programming details of this feature.

4. Maintenance

4.1. Cleaning the Remote Control

To maintain the appearance and functionality of your remote control:

• Wipe the surface with a soft, dry cloth.
• For stubborn dirt, lightly dampen the cloth with water and a mild detergent, then wipe dry immediately.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the surface or internal components.

4.2. Battery Replacement

Replace batteries when the remote's response becomes sluggish or the LCD display dims. Refer to section 2.1 for battery installation instructions.

5. Troubleshooting

If you experience issues with your NEC RE0101 remote control, try the following solutions:

• Remote not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace the batteries with new ones.
  • Ensure there are no obstructions between the remote and the LED ceiling light.
  • Confirm the remote is pointed directly at the light fixture.
  • Re-pair the remote control with the light fixture (refer to section 2.2).
• Light fixture not responding to specific functions:
  • Ensure the light fixture is compatible with all remote functions.
  • Check the light fixture's own manual for any specific requirements or limitations.
• LCD screen is blank or dim:
  • Replace the batteries.

If the problem persists after trying these steps, contact NEC customer support.

6. Specifications

7. Warranty & Support

7.1. Warranty Information

For warranty details regarding your NEC RE0101 remote control, please refer to the warranty card included with your LED ceiling light fixture or visit the official NEC website. Keep your purchase receipt as proof of purchase for warranty claims.

7.2. Customer Support

If you require further assistance or have questions not covered in this manual, please contact NEC customer support. Contact information can typically be found on the NEC official website or on the packaging of your product.

• Online Support: Visit the official NEC website for FAQs, product information, and support contact details.
• Telephone Support: Refer to your product documentation for regional customer service phone numbers.