CLIPSTER DeloX Battery Clippers User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use, setup, operation, and maintenance of your CLIPSTER DeloX Battery Clippers. Please read this manual thoroughly before first use and retain it for future reference. The CLIPSTER DeloX is designed for detailed shearing tasks.

2. Safety Information

WARNING: For detailed shearing only. Avoid use on face, neck, and other sensitive areas. Follow all battery safety guidelines. Keep the charging cradle dry and handle with care.

• Always ensure the device is switched off before cleaning or maintenance.
• Do not immerse the clipper or charging cradle in water or other liquids.
• Keep out of reach of children and pets.
• Use only the provided power supply and charging cradle.
• Do not operate the clipper if the blade is damaged or bent.
• Store the device in a dry place when not in use.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

• CLIPSTER DeloX Battery Clippers
• 4 Attachment Combs (3 mm, 6 mm, 9 mm, 12 mm)
• Cleaning Brush
• Power Supply
• Charging Cradle
• Instruction Manual
• Blade Oil

Image 3.1: CLIPSTER DeloX Battery Clippers and included accessories, illustrating the main unit, charging base, power adapter, oil, cleaning brush, and four comb attachments (3mm, 6mm, 9mm, 12mm).

4. Product Features

• Stainless Steel Shaving Head: Ensures precise cuts and excellent shearing properties.
• 3-Stage Shearing Speed: Customizable for different coat types and requirements (4000, 5000, 6000 strokes/min).
• Digital Display: Clearly shows charge status, residual capacity, cleaning, and oil requirements.
• Flexible Operation: Can be used with the 2200 mAh Li-ion battery or directly with the power supply.
• 5-Level Cutting Height Adjustment: Allows precise adjustment of the cutting height via a control wheel (0.8 - 2.0 mm).
• High-Quality, Durable Motor: Designed for longevity and consistent performance.

5. Technical Specifications

6. Setup

6.1 Initial Charging

1. Connect the power supply to the charging cradle.
2. Plug the power supply into a suitable electrical outlet.
3. Place the clipper into the charging cradle. Ensure the digital display illuminates, indicating charging has begun.
4. Allow the clipper to charge for approximately 300 minutes before first use to ensure the battery is fully conditioned. The digital display will show the charging status.

6.2 Attaching Combs

1. Ensure the clipper is switched off.
2. Select the desired attachment comb (3mm, 6mm, 9mm, or 12mm).
3. Align the comb with the clipper blade and slide it firmly into place until it clicks.
4. To remove, gently push the comb upwards and away from the blade.

Image 6.1: Front view of the CLIPSTER DeloX Battery Clippers, showing the power button, cutting height adjustment wheel, and digital display.

7. Operating Instructions

7.1 Powering On/Off

Press the power button located on the front of the clipper to turn it on or off.

7.2 Adjusting Cutting Height

The clipper features a 5-stage cutting height adjustment wheel (0.8 mm to 2.0 mm) located below the blade. Rotate the wheel to select the desired cutting length. This adjustment works independently or in conjunction with attachment combs.

7.3 Selecting Shearing Speed

The clipper offers three shearing speeds. Press the power button repeatedly to cycle through the speeds (Level 1, Level 2, Level 3). The digital display may indicate the current speed setting.

7.4 Shearing Technique

• Ensure the animal's coat is clean and dry before shearing.
• Hold the clipper firmly and move it against the direction of hair growth for an even cut.
• Use smooth, steady strokes.
• Regularly check the blade for hair buildup and clean as necessary to maintain performance.

Image 7.1: Angled view of the CLIPSTER DeloX Battery Clippers, highlighting the ergonomic design and blade area.

8. Maintenance

8.1 Cleaning the Blade

1. Switch off the clipper and disconnect it from any power source.
2. Carefully remove the attachment comb (if used).
3. Use the provided cleaning brush to remove hair and debris from the blade and clipper head.
4. For thorough cleaning, the blade set can be detached according to the instructions in the full manual (not provided here, but implied for a complete product).

8.2 Oiling the Blade

Regular oiling is crucial for maintaining blade sharpness and clipper performance. The digital display will indicate when oiling is required.

1. Apply a few drops of the supplied blade oil to the teeth and sides of the blade after each use, or as indicated by the digital display.
2. Turn the clipper on for a few seconds to distribute the oil evenly.
3. Wipe off any excess oil with a soft cloth.

8.3 Storage

Store the clipper and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

9. Troubleshooting

• Clipper not turning on:
  • Ensure the battery is charged. Connect to the charging cradle and check the digital display.
  • Verify the power supply is correctly connected and the outlet is functional.
• Poor cutting performance:
  • Clean the blade to remove accumulated hair and debris.
  • Oil the blade as described in the maintenance section.
  • Check if the blade is damaged or dull. A replacement blade may be necessary.
  • Ensure the attachment comb is correctly seated.
• Clipper runs slowly or stops:
  • The battery may be low. Recharge the clipper.
  • Excessive hair buildup can impede blade movement. Clean the blade thoroughly.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Specific warranty terms may vary by region and retailer.

Manufacturer: Albert Kerbl GmbH

Model Number: 18463