Manuals+

Easytry123 Easytry0476

Easytry123 Remote Control User Manual

Model: Easytry0476

Introduction

This manual provides instructions for the Easytry123 Replacement Remote Control, model Easytry0476. This remote is designed to operate various Samsung Smart LED HDTV TV models, including UN50H5203AF, UN50H6201AF, UN50H6203AF, UN55H6203AF, UN55HU6830F, UN58H5202AF, UN28H4500AF, and UN32H5201AF. Please read this manual carefully before use to ensure proper operation.

Important Note:

  • This is a replacement remote control. It may not support all advanced functions available on your original TV remote.
  • Ensure your TV model is listed in the compatible models to guarantee functionality.

Package Contents

  • 1 x Easytry123 Replacement Remote Control (Model: Easytry0476)
  • Note: Batteries are not included and must be purchased separately.

Setup

1. Installing Batteries

The Easytry123 remote control requires two (2) AA batteries for operation. Follow these steps to install them:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch (if present) to open the compartment.
  3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Image showing the back of the Easytry123 remote control with the battery compartment open and a detached cover.

Figure 1: Battery compartment of the remote control.

2. Initial Use

This remote control is designed for immediate use with compatible Samsung TV models. No programming or pairing is typically required. Simply point the remote at your TV and press the desired function button.

Operating Instructions

The Easytry123 remote control features standard buttons for navigating your Samsung TV. Below is a general overview of common button functions.

Front view of the Easytry123 remote control showing all buttons and their labels.

Figure 2: Front view of the Easytry123 remote control.

Button Functions:

  • Power (TV / STB): Turns the TV or Set-Top Box on/off.
  • Source: Selects input sources (HDMI, AV, etc.).
  • Number Pad (0-9): Direct channel selection.
  • Volume (+/-): Adjusts the volume level.
  • Channel (CH +/-): Changes TV channels.
  • Mute: Mutes or unmutes the TV audio.
  • Menu: Accesses the TV's main menu.
  • Tools: Opens quick settings or tools menu.
  • Guide: Displays the electronic program guide.
  • Info: Shows information about the current program.
  • Smart Hub: Accesses Samsung's Smart Hub platform.
  • Navigation Buttons (Up, Down, Left, Right, Enter): Used to navigate menus and select options.
  • Return: Goes back to the previous screen or menu.
  • Exit: Exits the current menu or application.
  • Color Buttons (A, B, C, D): Functionality varies by application or TV menu.
  • Play/Pause/Stop/Fast Forward/Rewind: Media playback controls.

For specific functions related to your TV model, refer to your television's user manual.

Maintenance

Cleaning the Remote Control

  • Wipe the remote control with a soft, dry cloth.
  • For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner.
  • Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's surface or internal components.

Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AA batteries. Do not mix old and new batteries, or different types of batteries.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.

Troubleshooting

ProblemPossible CauseSolution
Remote control not working.
  • Dead or incorrectly inserted batteries.
  • Obstruction between remote and TV.
  • Remote control is too far from the TV.
  • Infrared sensor on TV is blocked.
  • Replace batteries with new AA batteries, ensuring correct polarity.
  • Remove any objects blocking the line of sight between the remote and the TV.
  • Move closer to the TV.
  • Ensure the TV's infrared sensor is not blocked.
Some functions do not work.
  • Remote is a replacement and may not support all original TV functions.
  • TV model is not fully compatible.
  • This is expected for some replacement remotes.
  • Verify your TV model against the list of compatible models.
Buttons are sticky or unresponsive.
  • Dirt or debris under buttons.
  • Internal damage.
  • Clean the remote control as described in the Maintenance section.
  • If cleaning does not resolve the issue, the remote may need replacement.

Specifications

  • Model: Easytry0476
  • Brand: Easytry123
  • Connectivity Technology: Infrared (IR)
  • Compatible Devices: Samsung Smart LED HDTV TVs (Specific models listed in Introduction)
  • Power Source: 2 x AA Batteries (not included)
  • Controller Type: Button Control
  • Special Feature: Ergonomic design
  • First Available Date: June 20, 2018

Warranty and Support

Information regarding warranty coverage for this Easytry123 product is not provided in the product details. For any support inquiries or to report issues, please contact the seller or refer to the purchase platform for seller contact information.

It is recommended to retain your proof of purchase for any potential warranty claims or support requests.

Documents - Easytry123 – Easytry0476

no relevant documents