MPC Remote Start System User Manual

1. Product Overview

This is a complete remote starter kit designed for 2007-2011 Toyota Camry vehicles equipped with Push-to-Start ignition and a gas engine. The kit includes an all-in-one remote starter data interface module with preloaded firmware specific to your vehicle. All necessary components for installation are provided. This system is compatible with automatic transmission vehicles only.

2. Compatibility and Key Type Identification

Ensuring compatibility with your vehicle's ignition system is crucial for proper installation and function. This remote start system is specifically designed for Toyota Camry models from 2007 to 2011 that feature a Push-to-Start ignition button and a gas engine. It is not compatible with key-start vehicles or hybrid models.

To further assist in identifying the correct key type for your vehicle, please refer to the following instructional video:

3. Setup and Installation

Basic installation knowledge of car electronics wiring is required for this product. While the included data module significantly reduces the number of wiring connections typically associated with remote start installations, it is not a plug-and-play system. A small number of specific wiring connections are necessary. Concise directions with wire colors and locations are provided to guide you through the process.

A yellow pry tool, often useful for safely removing interior trim panels during installation, may be included or recommended for purchase separately.

4. Operating Instructions

This remote start system is an add-on to your vehicle's existing keyless entry system. It does not include separate remotes. To activate the remote start function, simply press the "lock" button on your factory remote three times. This allows you to warm or cool your vehicle without needing to carry additional key fobs.

For security and to prevent theft, the remote starter is designed to shut down the vehicle automatically if any door is opened after remote starting.

5. Maintenance

The MPC Remote Start System is designed for minimal maintenance. Ensure your vehicle's factory remotes are in good working condition, as they are essential for operating the remote start feature. No specific routine maintenance is required for the remote start module itself.

6. Troubleshooting

If you encounter any issues with your remote start system, please refer to the following common points:

• Vehicle Shutdown: The system is designed to shut down if a door is opened after remote starting. This is a security feature, not a malfunction.
• No Response: Ensure your factory remote's battery is not depleted. Verify you are pressing the "lock" button three times in quick succession.
• Installation Issues: Double-check all wiring connections against the provided installation tip sheet. Incorrect connections are a common cause of non-functionality.

For further assistance or if you get stuck during installation or operation, MPC offers dedicated technical support. You can reach U.S.-based technical support Monday-Friday, 9 AM-5 PM Arizona time. Additionally, a web-based support ticket system is available 24/7 for your convenience.

7. Specifications

8. Warranty and Support

MPC is committed to providing comprehensive support for its products. In an effort to 'Go Green', a link to download MPC's exclusive copyrighted installation tip sheet, created by professional technicians, is provided to assist you with the installation process.

For direct assistance, U.S.-based technical support is available Monday-Friday from 9 AM to 5 PM Arizona time. You can also submit a web-based support ticket 24/7 for any questions or issues you may have.

Legal Disclaimer: This kit does not include any OEM key fob or OEM remote. The remote start function is activated by pressing the "lock" button three times on your existing factory remote.