Ontel RCMT-MC12/3

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Ontel Magic Tracks RC Remote Control Turbo Race Cars & Glow in the Dark Racetrack User Manual

Model: RCMT-MC12/3

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Ontel Magic Tracks RC Remote Control Turbo Race Cars and Glow in the Dark Racetrack. Please read this guide thoroughly before use to ensure proper function and safety.

Ontel Magic Tracks RC product box showing the glow track, remote control, and a race car.
Figure 1: Ontel Magic Tracks RC product packaging, illustrating the flexible glow track, remote control, and a race car.

Safety Information

For detailed safety information, please refer to the product packaging. Keep small parts away from children under 3 years of age due to choking hazard.

What's Included

Your Ontel Magic Tracks RC set includes the following components:

  • 10 feet (200 pieces) of Glow Track
  • 1 LED Light-Up Race Car
  • 1 Multi-Function Remote Control (Batteries Not Included)
  • 1 Jump Ramp
  • 1 Crash X-Track
  • 1 Sheet of Peel N’ Stick Car Decals
  • 1 Instruction Guide
Image showing one LED light-up R/C Race Car and one multi-function remote control.
Figure 2: The LED Light-Up Race Car and its Multi-Function Remote Control.

Setup

  1. Track Assembly:

    • Snap the track pieces together to form your desired layout. The serpentine technology allows the track to bend, flex, and loop into various shapes and patterns.
    • Ensure all connections are secure to prevent the car from derailing.
    • Integrate the Jump Ramp and Crash X-Track into your layout as desired.
    Image showing assembled Magic Tracks RC glow track with a remote control and a race car.
    Figure 3: Assembled Magic Tracks RC glow track with a remote control and a race car, demonstrating track flexibility.
  2. Battery Installation:

    • LED Race Car: The LED car requires 3 AAA batteries (not included). Locate the battery compartment on the underside of the car, open it, insert the batteries with correct polarity (+/-), and close the compartment securely.
    • Remote Control: The remote control requires 2 AAA batteries (not included). Locate the battery compartment on the back of the remote, open it, insert the batteries with correct polarity (+/-), and close the compartment securely.
  3. Apply Decals: Use the provided Peel N’ Stick Car Decals to customize your race car.

Operating Instructions

Once the track is assembled and batteries are installed, you are ready to operate your Magic Tracks RC car.

  1. Power On: Ensure the race car's power switch is in the "ON" position.

  2. Remote Control Functions: The multi-function remote control provides 7 extreme functions:

    • Go: Press to move the car forward.
    • Stop: Press to halt the car.
    • Turbo: Activates a speed boost for enhanced racing.
    • Reverse: Moves the car backward.
    • Flash: Controls the car's flashing lights.
    • Lights: Toggles the car's LED lights.
    • Horn: Activates the car's horn sound effect.
  3. Glow Trail Technology: The LED lights on the race car charge the glow-in-the-dark track as it moves, creating visible glow trails. For best results, operate in a dimly lit or dark environment.

    Image of a red Magic Tracks RC car racing on a glowing track in the dark, showing glow trails.
    Figure 4: The Magic Tracks RC car creating glow trails on the track in a dark environment.
    Image of a red Magic Tracks RC car navigating a glowing loop on the track in the dark.
    Figure 5: The Magic Tracks RC car successfully navigating a glowing loop section of the track.

Maintenance

  • Cleaning: Wipe the track pieces and car with a dry or slightly damp cloth. Do not immerse electronic components in water.
  • Battery Replacement: Replace batteries in both the car and remote control when performance diminishes. Always use new batteries of the specified type (AAA).
  • Storage: The glow track can be rolled up for convenient storage and portability. Store all components in a dry, cool place away from direct sunlight.

Troubleshooting

ProblemPossible CauseSolution
Car does not move or moves slowly.Low or dead batteries in car or remote. Incorrect battery polarity. Car power switch is off.Replace batteries in both the car and remote. Ensure batteries are inserted with correct polarity. Turn the car's power switch to "ON".
Car lights are dim or not working.Low batteries in the car. Lights function not activated on remote.Replace car batteries. Press the "Lights" button on the remote control.
Track does not glow.Insufficient light exposure from car LEDs. Room is too bright.Ensure car LEDs are functioning. Operate the track in a dimly lit or dark room for optimal glow effect.
Car derails frequently.Track pieces not securely connected. Track layout too steep or sharp.Check all track connections for security. Adjust track layout to be less extreme on curves or inclines.

Specifications

  • Product Dimensions: 2.82 x 10.39 x 10.39 inches
  • Item Weight: 1.3 pounds
  • Model Number: RCMT-MC12/3
  • Manufacturer Recommended Age: 3 years and up
  • Car Batteries: 3 x AAA (not included)
  • Remote Control Batteries: 2 x AAA (not included)
  • Track Length: 10 feet (200 pieces)

Warranty Information

For information regarding product warranty, please refer to the official Ontel website or contact their customer support directly. Warranty details are typically provided with the product packaging or on the manufacturer's official channels.

Support

If you require further assistance or have questions not covered in this manual, please visit the official Ontel store or contact their customer service department.

Visit the Ontel Store on Amazon

© 2024 Ontel. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.