Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Do not exceed the maximum load capacity of 40 kg for the TV mount and 60 kg for the tempered glass base.
- Ensure the TV's VESA pattern is compatible (75x75 to 600x400mm).
- Do not use an electric drill for screws on the glass base to prevent damage.
- Ensure all screws are securely tightened before use.
- Place the stand on a stable, level surface.
- Keep children and pets away during assembly.
Package Contents
Verify all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
| Part | Description | Quantity |
|---|---|---|
| Main Column | Vertical support for the TV mount. | 1 |
| Tempered Glass Base | Sturdy base for stability. | 1 |
| TV Mounting Bracket | Horizontal bar for attaching TV arms. | 1 |
| TV Mounting Arms | Vertical arms that attach to the TV. | 2 |
| Hardware Kit | Assorted screws, washers, spacers, and tools. | 1 set |
| Cable Management Clips | For organizing cables. | Included |
| Non-slip Rubber Feet | For base stability and floor protection. | 6 |
Note: Specific screw sizes and quantities are detailed in the hardware kit packaging.
Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for TV mounting.
Step 1: Attach Main Column to Tempered Glass Base
Secure the main column to the tempered glass base using the provided screws. Ensure the column is aligned correctly with the pre-drilled holes in the glass base. Remember not to use an electric drill for these screws.
Image: Fully assembled BONTEC TV Floor Stand, showcasing the main column attached to the tempered glass base, with a television mounted.
Step 2: Assemble TV Mounting Bracket and Arms
Attach the horizontal TV mounting bracket to the main column. Then, secure the two vertical TV mounting arms to the back of your television using the appropriate VESA screws and spacers from the hardware kit. Ensure the arms are level and securely fastened to your TV's VESA mounting points.
Image: A detailed diagram illustrating the VESA compatibility (75x75mm to 600x400mm) and overall dimensions of the BONTEC TV Floor Stand, including maximum TV weight capacity of 40kg and base capacity of 60kg.
Step 3: Mount the TV onto the Stand
Carefully lift the television with the attached mounting arms and hook them onto the horizontal TV mounting bracket on the stand. Use the safety lock mechanism to secure the TV in place, preventing accidental dislodgement.
Image: A close-up view of the safety lock mechanism, which secures the TV mounting arms to the main bracket, ensuring the television is firmly attached to the stand.
Step 4: Cable Management
Utilize the integrated cable management clips and holes in the main column to route and organize your TV and accessory cables. This helps maintain a neat and tidy appearance and prevents tangles.
Image: An illustration demonstrating how cables (red, yellow, blue) are neatly routed through the two circular openings in the main column of the TV stand, highlighting the integrated cable management system.
Operating Instructions
Height Adjustment
The BONTEC TV Floor Stand offers multiple levels of height adjustment for optimal viewing. The mounting arms can be adjusted at 2 height levels (50mm increments), and the main plate can be adjusted at 3 height levels (40mm increments). To adjust, loosen the securing bolts, slide the components to the desired height, and re-tighten all bolts securely.
Image: A visual guide demonstrating the height adjustment capabilities of the TV stand. It shows how the mounting arms can be adjusted by 50mm and the central column by 40mm increments, allowing for customized TV placement.
Swivel Function
The TV mounting bracket allows for a swivel of 37 degrees left and right. Gently push the television to the desired viewing angle. This feature provides flexibility for viewing from various positions in a room.
Image: An illustration highlighting the swivel functionality of the TV stand, indicating a 37-degree swivel range to both the left and right, providing flexible viewing angles.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the metal and glass surfaces. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Glass Care: The tempered glass base is durable, but avoid dropping heavy objects on it or subjecting it to sharp impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly/unstable. | Screws are loose; uneven floor; weight imbalance. | Check and tighten all assembly screws. Ensure the stand is on a flat, level surface. Redistribute weight if possible. |
| TV does not fit the mount. | Incorrect VESA pattern; TV size outside range. | Verify your TV's VESA pattern matches the stand's compatibility (75x75 to 600x400mm). Confirm TV size is between 30-70 inches. |
| Difficulty with height adjustment or swivel. | Securing bolts too tight; obstruction. | Loosen relevant bolts before attempting adjustment. Check for any obstructions. |
Specifications
- Model: FIG-7
- Compatible TV Sizes: 30 - 70 inches
- Maximum TV Load Capacity: 40 kg
- VESA Compatibility: 75x75, 100x100, 200x100, 200x200, 200x300, 300x300, 300x400, 400x200, 400x300, 400x400, 600x400mm
- Swivel Angle: ±37 degrees
- Height Adjustment: 6 levels (Mounting arms: 2 levels x 50mm; Plate: 3 levels x 40mm)
- Base Material: 8mm Polished Tempered Glass
- Base Load Capacity: 60 kg
- Main Column Material: Metal
- Product Dimensions: 55 x 0.03 x 0.13 cm (Base: 550mm x 350mm); 9.17 kg (Product Weight)
Warranty and Support
BONTEC products are designed for durability and performance. For any questions regarding assembly, parts, or product functionality, please contact BONTEC customer support.
Please refer to your purchase documentation for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
Contact Information: Please visit the official BONTEC website or your retailer's support page for the most up-to-date contact details.
You can also visit the BONTEC Store on Amazon for more information and support.
