Introduction
Thank you for purchasing the Project Source 13-inch Brushed Nickel LED Flush Mount Light. This ENERGY STAR certified fixture is designed to provide efficient and long-lasting illumination for your indoor spaces. This manual will guide you through the installation, operation, and maintenance to ensure safe and proper use of your new light fixture.
An image showing the Project Source 13-inch Brushed Nickel LED Flush Mount Light. The fixture features a brushed nickel base and a frosted white dome-shaped diffuser, designed for ceiling installation.
Important Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other injuries that could be hazardous or fatal.
- Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not install this fixture in wet or damp locations. It is designed for indoor use only.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Handle the fixture with care to avoid damage to the LED components.
Package Contents
Verify that all components are present before beginning installation:
- LED Flush Mount Light Fixture (1)
- Mounting Hardware Kit (1)
- Remote Control (1)
- User Manual (1)
Setup and Installation
Follow these steps to properly install your light fixture:
- Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Remove any existing fixture and mounting hardware. Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Install Mounting Bracket: Attach the mounting bracket (included in hardware kit) to the junction box using the provided screws. Ensure the bracket is firmly secured.
- Make Electrical Connections: Carefully connect the electrical wires. Connect the fixture's black wire to the house's black (live) wire, the fixture's white wire to the house's white (neutral) wire, and the fixture's ground wire to the house's ground wire (or ground screw on the mounting bracket). Secure connections with wire nuts.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling.
- Restore Power: Once the fixture is securely installed and all connections are made, restore power at the circuit breaker.
Operating Instructions
This LED flush mount light is designed for simple operation:
- Wall Switch: The fixture can be controlled by a standard wall switch connected to the circuit.
- Remote Control: Use the included remote control to turn the light on/off. Refer to the remote control's specific instructions for any additional features like dimming or color temperature adjustments, if applicable.
Maintenance
To maintain the appearance and performance of your light fixture:
- Cleaning: Always turn off the power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long life and does not require replacement.
Troubleshooting
If you experience issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is ON. |
| Light does not turn on. | Loose wire connections. | Turn off power and check all wire connections. |
| Light flickers or dims. | Incorrect wiring or loose connection. | Turn off power and re-check all wire connections. Ensure proper voltage supply. |
| Remote control not working. | Dead batteries in remote. | Replace batteries in the remote control. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Project Source |
| Model Number | 41058 |
| Product Dimensions | 13 x 13 x 3 inches |
| Item Weight | 3 pounds |
| Color | Nickel |
| Material | Nickel |
| Style | Modern |
| Light Fixture Form | Ceiling |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Flush Mount |
| Control Method | Remote |
| Light Source Type | LED |
| Finish Type | Brushed |
| Shade Material | Nickel |
| Number of Light Sources | 1 |
| Voltage | 120 Volts (DC) |
| Light Color | Warm White |
| Included Components | Remote Control, Mounting Hardware |
| Wattage | 12 watts |
| Efficiency | ENERGY STAR Certified |
| Assembly Required | No |
| UPC | 671961410582 |
Warranty Information
This Project Source product is backed by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the product packaging or contact customer support.
Customer Support
For technical assistance, replacement parts, or any questions regarding your Project Source 13-inch Brushed Nickel LED Flush Mount Light, please contact our customer support team:
- Website: Visit the Project Source official website for FAQs and support resources.
- Phone: Refer to your product packaging for customer service contact numbers.
Please have your model number (41058) and date of purchase ready when contacting support.
