1. Introduction and Overview
The Atomberg Renesa 1200mm BLDC Ceiling Fan is designed for superior air delivery and energy efficiency. Featuring a Brushless DC (BLDC) motor, this 5-star rated fan significantly reduces electricity consumption while providing consistent airflow. It comes equipped with a smart IR remote for convenient control of speed, boost mode, timer, and sleep mode. Its sleek design with integrated LED indicators enhances any room's decor.
Figure 1: Atomberg Renesa 1200mm BLDC Ceiling Fan (Gloss White) with its remote control. This image shows the fan's three blades and central motor housing, along with the compact remote.
2. Safety Information
- Always ensure the main power supply is disconnected before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician or service professional.
- Do not insert fingers or any objects into the fan blades while the fan is operating.
- Ensure the fan is securely mounted to a ceiling joist or a suitable support structure capable of holding the fan's weight.
- Keep the remote control away from water and extreme temperatures.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Verify that all components are present in the package before beginning installation:
- Motor Box (contains the fan motor assembly)
- Blade Box (contains the three fan blades)
- Remote Control
- Canopies (upper and lower)
- Warranty Card
- Mounting Hardware (screws, bolts, etc. - typically included with the motor box)
4. Setup and Installation
The Atomberg Renesa fan is designed for straightforward installation. For optimal safety and performance, it is highly recommended to have the fan installed by a certified professional. Doorstep installation services can be initiated through Urban Company or directly via Atomberg's customer support.
4.1 Pre-Installation Checklist
- Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Confirm the ceiling structure can support the fan's weight (approximately 3.4 kg).
- Gather necessary tools: screwdriver set, wire strippers, electrical tape, ladder.
4.2 Installation Steps (General Guide)
While professional installation is advised, the general steps involve:
- Mounting the Bracket: Securely attach the mounting bracket to the ceiling junction box or a reinforced ceiling support.
- Wiring: Connect the fan's electrical wires to the household wiring according to local electrical codes. Ensure all connections are secure and insulated.
- Assembling the Fan: Attach the downrod (if applicable) to the motor housing, then slide the canopies into place.
- Hanging the Fan: Carefully lift the fan assembly and hang it onto the mounting bracket.
- Attaching Blades: Securely fasten each of the three fan blades to the motor housing using the provided screws.
- Final Checks: Ensure all connections are tight and the fan is stable before restoring power.
Figure 2: Exploded view of the BLDC motor, highlighting its advanced components that contribute to energy efficiency and consistent performance. This illustrates the core technology of the fan.
5. Operating Instructions
The Atomberg Renesa fan is operated using the included Smart IR Remote. Ensure the remote has working batteries and is pointed towards the fan's receiver for optimal functionality.
5.1 Remote Control Functions
Figure 3: The Smart IR Remote for the Atomberg Renesa fan, showing buttons for power, speed control (1-5), Boost mode, Timer mode, LED light control, and Sleep mode.
- Power Button (Red Circle): Turns the fan On or Off.
- Speed Control (1-5): Adjusts the fan speed from 1 (lowest) to 5 (highest). The fan provides 6 power levels in total.
- Boost Mode ('B' button): Activates the fan at its maximum speed (equivalent to speed 6 or 35W) for rapid cooling.
- Timer Mode (Clock icon): Sets a timer for the fan to automatically turn off after a specified duration. Refer to the remote's specific instructions for setting the timer.
- Sleep Mode (Moon icon): Gradually decreases the fan speed by one level every two hours, providing comfortable sleep while saving energy.
- LED Light Control (Lightbulb icon): Toggles the integrated LED indicator lights on or off. These lights can serve as a night lamp.
5.2 Power Consumption at Each Speed
The BLDC motor ensures low power consumption across all speed settings:
Figure 4: Power consumption table illustrating the low wattage at different fan speeds, from Speed 1 (3W) to Boost Speed (35W).
| Speed | Wattage (W) |
|---|---|
| 1 | 3 |
| 2 | 7 |
| 3 | 12 |
| 4 | 18 |
| 5 | 28 |
| Boost Speed | 35 |
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Atomberg Renesa fan.
- Cleaning: Dust accumulates on fan blades and motor housing. Regularly clean the fan with a soft, damp cloth. Ensure the fan is completely turned off and power is disconnected before cleaning. Do not use abrasive cleaners or solvents.
- Blade Inspection: Periodically check the fan blades for any signs of damage or bending. Damaged blades can cause imbalance and noise.
- Tightness of Screws: Over time, screws can loosen. Occasionally check and tighten all screws on the fan blades and mounting assembly.
- No Lubrication Required: The BLDC motor is designed for maintenance-free operation and does not require lubrication.
7. Troubleshooting
If you encounter issues with your Atomberg Renesa fan, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; Remote battery low/dead; Remote not paired (though IR remotes don't typically pair, ensure line of sight); Loose wiring. | Check main power supply and circuit breaker. Replace remote batteries. Ensure clear line of sight to the fan's receiver. Check wiring connections (consult a professional if unsure). |
| Fan operates but air delivery is low. | Fan speed set too low; Room size too large for fan sweep; Obstructions. | Increase fan speed using the remote. Refer to sweep size guide (Figure 5) to ensure appropriate fan size for your room. Remove any obstructions. |
| Fan makes unusual noise. | Loose screws on blades or mounting; Bent blades; Internal motor issue. | Tighten all screws on blades and mounting. Inspect blades for damage and replace if necessary. If noise persists, contact customer support. |
| Remote control not responding. | Low/dead batteries; Obstruction between remote and fan; Remote out of range. | Replace batteries. Ensure direct line of sight to the fan. Operate within 20 ft range. |
Figure 5: Sweep size guide. This diagram helps determine the appropriate fan size based on room area, ensuring effective air circulation.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Atomberg |
| Model Name | Renesa |
| Colour | Gloss White |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Product Dimensions | 59D x 25W x 23H Centimeters |
| Room Type | Bedroom, Dining Room, Living Room, Office |
| Special Feature | Remote Controlled |
| Recommended Uses | Cooling |
| Wattage | 35 Watts (Max) |
| Finish Type | Gloss |
| Number of Blades | 3 |
| Air Flow Capacity | 235 Cubic Metres per Minute (CMM) |
| Blade Length | 48 Inches (1200mm) |
| Speed | 360 RPM |
| Voltage | 220 Volts |
| Switch Type | Remote |
| Item Weight | 3.4 Kilograms |
| Indoor/Outdoor Usage | Indoor |
| Control Method | Remote |
| Light Type | LED |
| Blade Material | Aluminium |
| Efficiency | High Efficiency (BEE 5-star rated) |
| Number of Power Levels | 6 |
9. Warranty and Support
The Atomberg Renesa ceiling fan comes with a standard two-year warranty. An additional one-year warranty can be availed by registering your purchase on the official Atomberg website. Please retain your purchase receipt for warranty claims.
9.1 Warranty Registration
To avail warranty service, it is essential to register your product's barcode. You can register the barcode by visiting the official Atomberg website or by contacting their customer care.
9.2 Customer Support
For any queries, technical assistance, or warranty claims, please contact Atomberg Customer Care:
- Email: support@atomberg.com
- Phone/WhatsApp: 08448449442
For installation through Urban Company, you can book a visit via their app, which also allows for rescheduling and service tracking.