Introduction
This manual provides detailed instructions for the operation and maintenance of your SKMEI 1358 Digital Outdoor Sports Watch. Please read this manual thoroughly to ensure proper use and to maximize the watch's features.
Key Features
- Multi-functional Display: Time (12/24 hour format), Date, Day, Month.
- Environmental Sensors: Altimeter, Barometer, Thermometer, Digital Compass.
- Sports Tracking: Pedometer, Calories, Mileage, Stopwatch, Countdown, Metronome, Pace Tracker.
- Convenience Features: Dual Time Zone, Two Alarms, Hourly Chime, EL Backlight.
- Durability: 5ATM (50m/164ft) Water Resistance, ABS plastic case, Hardlex crystal, PU silicone strap with stainless steel buckle.
Setup
Initial Time and Date Setting
- In Timekeeping Mode, press and hold the MODE button until the seconds begin to flash, indicating the setting mode.
- Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Year → Month → Day → 12/24 Hour Format.
- Use the START button to adjust the flashing value.
- Once all settings are adjusted, press the MODE button to exit the setting mode.
Altimeter Calibration
For accurate altitude readings, calibrate the altimeter at a known altitude. Refer to a reliable source for your current elevation.
- Enter Altimeter Mode.
- Press and hold the MODE button until the altitude value flashes.
- Use the START and RESET buttons to adjust the altitude to the known value.
- Press the MODE button to save and exit.
Compass Calibration
Calibrate the compass for optimal accuracy, especially after changing locations or battery replacement.
- Enter Compass Mode.
- Press and hold the MODE button to enter calibration mode. The display will prompt for calibration.
- Rotate the watch horizontally in a full circle (360 degrees) slowly and steadily.
- Once calibration is complete, the watch will return to displaying the compass direction.
Operating Instructions
Button Functions
The watch features several buttons for navigation and function control:
- LIGHT: Activates the EL backlight.
- MODE: Cycles through different modes (Timekeeping, Altimeter, Barometer, Compass, Pedometer, Stopwatch, Countdown, Alarm, Dual Time). Also used to enter/exit setting modes.
- START: Used to start/stop functions (e.g., stopwatch), adjust values upwards in setting modes.
- RESET: Used to reset functions (e.g., stopwatch), adjust values downwards in setting modes, or switch between display units.
Timekeeping Mode
Displays the current time, date, and day of the week. Press MODE to cycle to other functions.
Altimeter Mode
Measures and displays the current altitude. The watch stores 24 hours of history with an altitude graph. Ensure proper calibration for accurate readings.
Image: The watch display showing altitude and barometer readings, with a background of a person in an outdoor, snowy environment, indicating its use for outdoor activities.
Image: A detailed view of the watch face, highlighting the pressure and temperature display, with a person hiking in the background, emphasizing the watch's environmental measurement capabilities.
Barometer Mode
Displays the current air pressure value. Combined with temperature, this can help forecast weather changes. Rising pressure may indicate fine weather, while dropping pressure suggests cloudy or rainy conditions.
Thermometer Mode
Shows the ambient temperature, ranging from -10°C to 60°C. You can select between Celsius (°C) and Fahrenheit (°F) display units.
Image: The watch face showing temperature and graphical weather forecast indicators, with a snowy mountain landscape and hikers in the background, illustrating its utility for weather monitoring.
Digital Compass Mode
Provides accurate directional readings. Useful for outdoor navigation. Ensure the compass is calibrated for the best performance.
Image: The watch display showing a compass reading, overlaid on a scene of a person hiking in a snowy mountain, highlighting the watch's compass functionality for outdoor adventures.
Pedometer and Sports Tracking
The watch tracks your steps, distance, calories burned, and sports time. It stores up to 7 days of activity data. No external app connection is required for this feature.
Image: A close-up of the watch display showing different sports metrics such as total steps, distance in kilometers, calories consumed, and a timer, demonstrating its comprehensive activity tracking features.
Stopwatch and Countdown Timer
Use the stopwatch for timing events with precision. The countdown timer can be set for up to 24 hours.
Alarms and Hourly Chime
Set up to two independent alarms. An hourly chime feature can also be activated to sound a short beep every hour on the hour.
Dual Time Zone
Allows you to keep track of time in two different time zones simultaneously, useful for travelers.
EL Backlight
Press the LIGHT button to illuminate the display for visibility in low-light conditions.
Official Product Video
Video: An official product video demonstrating the various features and functions of the SKMEI 1358 Digital Outdoor Sports Watch, including its display, buttons, and overall design.
Maintenance
Water Resistance
The SKMEI 1358 watch is water resistant to 5ATM (50 meters / 164 feet). This means it is suitable for everyday use, showering, and swimming in shallow water. However, it is not recommended for diving or prolonged submersion. Do not operate buttons while the watch is wet or submerged to prevent water ingress.
Cleaning
To clean your watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or components.
Battery Replacement
The watch uses a CR2032 battery. When the battery is low, the display may dim or functions may become unreliable. Battery replacement should ideally be performed by a qualified technician to ensure the water resistance seal is maintained.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inaccurate Compass Reading | Magnetic interference; needs calibration. | Perform compass calibration as described in the Setup section. Avoid strong magnetic fields. |
| Incorrect Altimeter Reading | Changes in atmospheric pressure; needs calibration. | Calibrate the altimeter at a known altitude. |
| Display is Dim or Blank | Low battery. | Replace the CR2032 battery. |
| Buttons Not Responding | Watch is wet; temporary software glitch. | Ensure the watch is dry before operating buttons. If unresponsive, try a soft reset (refer to full manual if available) or wait for the battery to drain and replace. |
| Water inside the watch | Buttons operated underwater; seal compromised. | Immediately take the watch to a professional for inspection and repair to prevent further damage. Do not operate buttons underwater. |
Specifications
- Model Number: 1358
- Case Material: ABS Plastic
- Dial Window Material: Hardlex
- Band Material: PU Silicone
- Clasp Type: Buckle (Stainless Steel)
- Water Resistance: 5ATM (50m / 164ft)
- Battery: CR2032 (included)
- Product Dimensions: 1.97 x 1.97 x 0.67 inches (50 x 50 x 17 mm)
- Item Weight: 1.59 ounces (45g)
- Functions: Time, Date, Day, Altimeter, Barometer, Thermometer, Compass, Pedometer, Calories, Mileage, Metronome, Stopwatch, Countdown, Dual Time, 2 Alarms, Hourly Chime, EL Backlight.
Warranty and Support
For any issues or inquiries regarding your SKMEI 1358 Digital Outdoor Sports Watch, please contact the seller directly via email. Specific warranty details are not provided in this manual; please refer to your purchase documentation or contact the seller for warranty information.
