Introduction
This manual provides instructions for the setup, operation, maintenance, and troubleshooting of your DRIKLUX Double Watch Winder, Model 1042BC-OS-5. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image: The DRIKLUX Double Watch Winder in both closed and open configurations, displaying two automatic watches.
Setup Instructions
1. Unpacking
- Carefully remove the watch winder from its packaging.
- Inspect the unit for any signs of damage. If damage is found, contact customer service immediately.
- Retain packaging for future transport or storage.
2. Placing Watches
The winder is designed to accommodate two automatic watches. Each watch is placed on a soft, flexible pillow within its designated winding slot.
- Gently compress the watch pillow.
- Secure your automatic watch around the pillow. Ensure the watch is snug but not overly tight.
- Place the pillow with the watch into one of the winding slots. Repeat for the second watch.
Image: The watch winder with its lid open, showing the two empty, soft watch pillows ready for watches.
Image: The watch winder with its lid open, displaying two automatic watches securely placed on their respective pillows.
3. Power Connection
The watch winder can be powered via an AC adapter or batteries.
- AC Power: Connect the provided AC adapter to the 'Power Switch' port on the back of the unit and plug it into a standard wall outlet.
- Battery Power: For portable use, open the battery compartment on the bottom of the unit and insert the required batteries (not included).
Image: Rear panel of the watch winder, highlighting the AC Input Port, TPD Setting dials, and Power Switch.
Image: Bottom view of the watch winder, showing the battery compartment for optional battery power.
Operating Instructions
1. Power On/Off
Use the power switch located on the back of the unit to turn the winder on or off.
2. Winding Modes (TPD Setting)
The DRIKLUX watch winder features five rotation modes, allowing you to select the optimal setting for your automatic watches. Each mode rotates at an average speed of six laps per minute. Consult your watch manufacturer's recommendations for the appropriate Turns Per Day (TPD) setting.
Adjust the TPD setting dials on the back of the unit to select the desired winding program. Refer to the markings on the dials for specific mode selections.
3. Quiet Operation
The winder is equipped with a super quiet motor designed to maintain even speed and quiet rotation, making it suitable for placement in bedrooms or offices without causing disturbance.
4. Automatic Stop Feature
For convenience and safety, the rotation mechanism automatically stops when the clear acrylic lid is opened.
Video: An introduction to the watch winder's operation, demonstrating the automatic stop feature when the lid is opened and the placement of watches on elastic pillows.
Maintenance
1. Cleaning
- Exterior: Wipe the black ostrich leather exterior with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners.
- Interior: The microfiber velvet interior can be gently dusted with a soft brush or cloth.
- Clear Lid: Clean the acrylic lid with a soft, lint-free cloth and a mild glass cleaner.
2. General Care
- Avoid exposing the winder to direct sunlight, extreme temperatures, or high humidity.
- Do not place heavy objects on top of the winder.
- Keep the winder away from strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder is not operating. | No power supply; Power switch is off. | Ensure the AC adapter is securely plugged in or batteries are correctly installed. Turn the power switch to the 'On' position. |
| Winder is making excessive noise. | Watch not properly seated; Unit on an uneven surface. | Ensure watches are securely placed on pillows and pillows are correctly inserted. Place the winder on a flat, stable surface. If noise persists, contact customer service. |
| Watch is not winding. | Incorrect TPD setting; Watch not automatic. | Verify the TPD setting matches your watch's requirements. Confirm your watch is an automatic movement. Ensure the watch is properly seated on the pillow. |
Specifications
- Model Number: 1042BC-OS-5
- Dimensions (L x W x H): 11.38 x 9.13 x 8.35 inches
- Weight: 4.83 Pounds
- Capacity: 2 Automatic Watches
- Exterior Material: PU Leather (Ostrich Pattern)
- Interior Material: Microfiber Velvet
- Case Material: Wood
- Power Source: AC Adapter (included) or Batteries (not included)
- Winding Mechanism: 5 Rotation Modes, 6 Laps per minute average speed
Warranty and Support
Your DRIKLUX Double Watch Winder comes with a one-year quality assurance. We also offer lifelong free maintenance and dedicated customer service for operation details and consultation.
For any questions, technical support, or warranty claims, please contact DRIKLUX customer service through the retailer where the product was purchased or refer to the contact information provided with your product packaging.