RICOO S5644 Swivel Tilt TV Wall Mount Instruction Manual

Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your RICOO S5644 Swivel Tilt TV Wall Mount. Please read all instructions carefully before beginning installation and keep this manual for future reference.

Safety Warning:

• Do not exceed the maximum weight capacity of 35 kg (77 lbs).
• Ensure the wall structure can safely support the combined weight of the mount and your TV.
• Always use appropriate tools and follow all safety precautions during installation.
• If you are unsure about any part of the installation, consult a qualified professional.

Package Contents

Verify that all components are present before starting the installation. If any parts are missing or damaged, contact RICOO customer support.

• TV Wall Mount Assembly (Main Arm and Wall Plate)
• TV Bracket Arms (x2)
• Mounting Hardware Kit (various screws, anchors, washers, spacers)
• Instruction Manual

Note: Specific screw sizes and types will vary based on your TV and wall type. Refer to the hardware kit for details.

Setup and Installation

Before installation, ensure your TV's VESA pattern and weight are compatible with the RICOO S5644 mount. This mount supports VESA patterns up to 400x400mm and TVs weighing up to 35 kg (77 lbs).

Step 1: Check VESA Compatibility

Locate the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes. This is your TV's VESA pattern. The S5644 supports VESA patterns including 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, and 400x400mm.

Image 1: VESA Compatibility. This image illustrates the range of TV sizes (40-65 inches) and VESA mounting patterns (200x200mm to 400x400mm) supported by the wall mount. Ensure your TV's VESA pattern matches one of the listed options.

Image 2: Maximum Weight Capacity. This image highlights the maximum weight capacity of the RICOO S5644 wall mount, which is 35 kg. Do not exceed this weight limit to ensure safe operation.

Step 2: Attach TV Brackets to TV

1. Carefully place your TV face down on a soft, clean surface to prevent screen damage.
2. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.

Image 3: Attaching TV Brackets. This image demonstrates how to attach the two vertical bracket arms to the VESA mounting points on the back of your television. Ensure the arrows on the brackets point upwards and they are securely fastened.

Step 3: Mount Wall Plate to Wall

1. Determine the desired height for your TV. Use a stud finder to locate wall studs if mounting on a wood stud wall. For concrete or brick walls, use appropriate anchors.
2. Hold the wall plate against the wall at the desired height and mark the drilling locations.
3. Drill pilot holes according to the recommended drill bit size for your wall type.
4. Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is level and firmly attached.

Step 4: Hang TV on Wall Mount

1. With assistance, carefully lift the TV with the attached brackets.
2. Hook the TV brackets onto the wall plate.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.

Operating Instructions

The RICOO S5644 wall mount offers various adjustments for optimal viewing.

Image 4: Adjustment Capabilities. This image illustrates the flexible movement options of the mount: 180-degree swivel for wide viewing angles, a tilt range of +5° to -15° to reduce glare, and a ±3° leveling adjustment for perfect screen alignment.

Swivel Adjustment

Gently push or pull the TV to the desired left or right angle. The mount allows for up to 180 degrees of swivel, depending on TV size and wall distance.

Tilt Adjustment

To adjust the vertical tilt, loosen the tilt adjustment knobs on the TV brackets, tilt the TV to the desired angle (up to +5°/-15°), and then tighten the knobs securely.

Level Adjustment

If your TV is not perfectly level after installation, you can adjust it by rotating the TV slightly. The mount allows for a ±3° leveling adjustment. Loosen the leveling screws, adjust, and re-tighten.

Extension and Retraction

The articulated arm allows you to extend the TV away from the wall or retract it closer to the wall for optimal viewing distance.

Maintenance

• Regular Inspection: Periodically check all screws and connections to ensure they remain tight and secure.
• Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Lubrication: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support.

Troubleshooting

Problem: TV is not level.

Solution: Use the level adjustment feature. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then re-tighten the screws.

Problem: Mount feels loose or unstable.

Solution: Immediately remove the TV from the mount. Re-check all wall mounting screws and TV bracket screws to ensure they are securely tightened. Verify that the wall structure is adequate for the weight. If issues persist, consult a professional installer.

Problem: Difficulty adjusting swivel or tilt.

Solution: Ensure no cables are obstructing movement. For tilt, loosen the tilt adjustment knobs before attempting to adjust, then re-tighten. Do not force movement.

Specifications

Image 5: Technical Dimensions. This detailed technical drawing provides all critical dimensions of the RICOO S5644 wall mount in millimeters, including its extension range (55-515mm), height (292mm), and the precise VESA mounting points, tilt, and swivel capabilities.

Warranty and Support

RICOO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RICOO website.

For further assistance, please contact RICOO customer service:

• Website: www.ricoo.eu (Example, actual link not provided in JSON)
• Email: support@ricoo.eu (Example)

Please have your model number (S5644) and purchase date ready when contacting support.