1. Product Overview
The Digitus Fast Ethernet USB 2.0 Print Server is designed to easily connect your USB printer to a network, allowing multiple users to share a single printer. This device supports common network and printing protocols, including Peer-to-Peer and server printing environments. It is compatible with various operating systems such as Windows and Linux, and offers convenient management options via web interface or a Windows configuration utility.
Package Contents:
- Digitus Fast Ethernet USB 2.0 Print Server
- Power Adapter
- Installation CD (or link to drivers/software online)
- Quick Installation Guide
2. Setup and Installation
Follow these steps to set up your Digitus Fast Ethernet USB 2.0 Print Server:
2.1 Hardware Connection
- Connect the Printer: Plug your USB printer's USB cable into the USB 2.0 port on the print server.
- Connect to Network: Connect one end of an Ethernet cable to the RJ45 port on the print server and the other end to an available port on your network router or switch.
- Connect Power: Plug the provided power adapter into the print server's power input (5V 1A) and then into a wall outlet. The Status LED should illuminate.
2.2 Software Installation and Configuration
The print server can be configured via a Windows utility or a web-based interface. It is recommended to use the Windows utility for initial setup.
- Install Utility: Insert the provided installation CD into your computer's CD-ROM drive. If you do not have a CD drive, download the latest utility and drivers from the official Digitus website.
- Run Setup: Follow the on-screen instructions to install the print server configuration utility.
- Discover Device: Launch the utility. It should automatically detect the print server on your network. If not, ensure your computer is on the same network segment as the print server.
- Configure IP Address: By default, the print server might have a static IP address (e.g., 192.168.0.10). For most home or small office networks, it is recommended to configure it to obtain an IP address automatically via DHCP.
- In the utility, navigate to the TCP/IP settings.
- Select "Obtain TCP/IP Settings Automatically (Use DHCP/BOOTP)".
- Apply changes and restart the print server if prompted.
- Add Printer: Once the print server has a valid IP address on your network, add the printer to your computer's operating system as a network printer.
- Go to "Devices and Printers" (Windows) or "Printers & Scanners" (macOS/Linux).
- Select "Add a printer".
- Choose to add a network, wireless, or Bluetooth printer.
- If prompted for a port, select "Standard TCP/IP Port" and enter the IP address of the print server.
- Select the appropriate printer driver for your connected USB printer.
- Test Print: Print a test page to confirm successful installation.
3. Operating the Print Server
Once configured, the print server operates largely autonomously. Users on the network can print to the connected USB printer as if it were directly connected to their computer.
3.1 Printing from Networked Devices
- Ensure the print server is powered on and connected to the network.
- Ensure the USB printer is powered on and connected to the print server.
- From any computer or device on the network that has the printer installed, simply select the network printer from your application's print dialog and send the print job.
- The print server will queue and manage print jobs from multiple users.
3.2 Web-Based Management
For advanced configuration or monitoring, you can access the print server's web interface:
- Open a web browser on a computer connected to the same network.
- Enter the IP address of the print server into the browser's address bar (e.g.,
http://192.168.1.100). - Log in if prompted (default credentials are often "admin" for both username and password, refer to the quick start guide for specifics).
- From the web interface, you can view status, change network settings, update firmware, and manage other print server functions.
4. Maintenance
The Digitus Fast Ethernet USB 2.0 Print Server requires minimal maintenance to ensure optimal performance.
- Keep Clean: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure the print server is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Firmware Updates: Check the official Digitus website periodically for firmware updates. Updating firmware can improve performance, add features, or resolve known issues. Follow the instructions provided with the firmware update carefully.
- Power Cycle: If the device becomes unresponsive or experiences connectivity issues, try power cycling it (unplug the power adapter, wait 10 seconds, then plug it back in).
5. Troubleshooting
This section addresses common issues you might encounter with the print server.
| Problem | Possible Cause | Solution |
|---|---|---|
| Print server not detected by utility or network. | Incorrect IP configuration; Network cable disconnected; Print server not powered on. |
|
| Printer is offline or not responding. | Printer not powered on; USB cable disconnected; Print server issue. |
|
| Printing is slow or delayed. | Network congestion; Large print jobs; Print server processing time. |
|
| Scanning function not working (for multifunction printers). | Print servers typically only support printing functions. |
|
6. Technical Specifications
| Feature | Detail |
|---|---|
| Model Number | DN-13003-2 |
| Brand | DIGITUS |
| Color | Black |
| USB Ports | 1 x USB 2.0 Type-A (for printer connection) |
| Network Interface | 1 x RJ45 Fast Ethernet (10/100 Mbps) |
| Ethernet Standards | IEEE 802.3, IEEE 802.3u |
| Network Protocols | TCP/IP, IPX/SPX, NetBEUI, AppleTalk |
| Printing Protocols | LPR, IPP, SMB/TCP, Raw Printing, Unix Logical |
| Operating System Compatibility | Windows 10, 8, 7, Vista, XP; Linux (via LPR/IPP); macOS (via LPR/IPP) |
| Management | Web-based management, Windows configuration utility, SNMP |
| Special Features | Reset button |
| Power Supply | External power adapter (included) |
| Country of Origin | China |
7. Warranty and Support
7.1 Manufacturer's Warranty
The Digitus Fast Ethernet USB 2.0 Print Server comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
The product originates from the European Economic Area (EEA) and is genuinely sourced from distributors authorized by the manufacturer.
7.2 Technical Support
For technical assistance, driver downloads, or firmware updates, please visit the official Digitus website. You can also find FAQs and additional resources there.
Official Digitus Solutions: https://www.assmann.com/loesungen/loesungsuebersicht/
When contacting support, please have your product model number (DN-13003-2) and purchase information ready.
