Introduction
This instruction manual provides essential information for assembling, caring for, and understanding your nanoblock Koala building kit. The nanoblock Koala model, part of the Collection series, allows you to construct a detailed miniature koala figure.
Figure 1: Assembled nanoblock Koala model, approximately 2.2 inches tall.
What's Included
- nanoblock - Koala [Animals] building kit components (145 pieces)
- Detailed step-by-step instructions
Figure 2: nanoblock Koala product packaging, showing the micro-sized building blocks.
Important Safety Information
WARNING: CHOKING HAZARD - Small Parts.
This product contains small parts and is not suitable for children under 3 years of age. Keep all building block pieces and packaging away from infants and young children to prevent accidental ingestion or choking.
Recommended age for assembly: 15 years and up. While the difficulty level is rated 2 (out of 5), the small size of the blocks requires fine motor skills and attention to detail.
Assembly Instructions
The nanoblock Koala kit consists of 145 micro-sized building blocks. Follow the detailed step-by-step instructions provided within the product packaging for accurate assembly.
- Unpack Components: Carefully open the packaging and lay out all the nanoblock pieces on a clean, flat, and well-lit surface. Ensure no pieces are lost.
- Review Instructions: Before starting, thoroughly read through the entire instruction booklet. Familiarize yourself with the block types and the assembly sequence.
- Follow Step-by-Step Diagrams: Each step in the instruction booklet will show a diagram indicating which blocks to use and where to place them. Pay close attention to the orientation and color of each block.
- Secure Connections: Press blocks firmly together to ensure a secure connection. The small size of the blocks requires precision.
- Patience is Key: Due to the intricate nature of nanoblock models, assembly requires patience and focus. Take breaks if needed.
Figure 3: Example of a nanoblock model held in hand, illustrating the small scale of the blocks.
Difficulty Level
This Koala model is rated at a Level 2 difficulty on a scale of 1 to 5, where 1 is the easiest and 5 is the most advanced. This indicates a moderate challenge suitable for experienced builders or patient beginners.
Figure 4: Nanoblock difficulty level chart, showing various models corresponding to different levels.
Display and Care
Once assembled, your nanoblock Koala is designed for display and collection. To ensure its longevity and appearance:
- Stable Surface: Place the assembled model on a flat, stable surface to prevent accidental falls.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause colors to fade over time.
- Keep Away from Dust: Display in an area with minimal dust accumulation.
- Handle with Care: While durable, the small connections can break if excessive force is applied. Handle the model gently.
Maintenance and Cleaning
To keep your nanoblock Koala model clean and well-maintained:
- Dusting: Use a soft, dry brush (like a clean makeup brush or a soft-bristled toothbrush) to gently remove dust from the model. Compressed air can also be used carefully.
- Spot Cleaning: For stubborn dirt, lightly dampen a cotton swab with water and gently wipe the affected area. Avoid using harsh chemicals or abrasive cleaners.
- Avoid Soaking: Do not submerge the model in water, as this may loosen connections or damage the plastic over time.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing pieces | Pieces may be very small and easily overlooked; manufacturing error. | Carefully re-check the packaging and work surface. If pieces are genuinely missing, contact nanoblock customer support (see Support section). |
| Difficulty connecting blocks | Incorrect block orientation; insufficient force; warped block. | Ensure blocks are correctly oriented as per instructions. Apply firm, even pressure. If a block appears warped, try another similar piece if available, or contact support. |
| Model is unstable | Blocks not fully pressed together; incorrect assembly step. | Review previous steps in the instructions to ensure all connections are secure and all blocks are placed correctly. |
Product Specifications
| Feature | Detail |
|---|---|
| Product Name | nanoblock - Animals - Koala, Collection Series Building Kit |
| Model Number | NBC257 |
| Brand | nanoblock |
| Number of Pieces | 145 |
| Assembled Dimensions (approx.) | 1.22 x 2.79 x 2.16 inches (3.1 x 7.1 x 5.5 cm) |
| Item Weight | 0.64 ounces (18.1 grams) |
| Recommended Age | 15 years and up |
| Difficulty Level | Level 2 (out of 5) |
| Release Date | May 1, 2021 |
| Manufacturer | Nanoblock (Kawada) |
Warranty Information
nanoblock products are manufactured to high-quality standards. For products purchased from authorized U.S. Retailers, the product box will feature a Bandai Namco warning label (or Bluefin warning label as per older descriptions), which serves as proof of an officially licensed Kawada product. This label entitles the purchaser to product support assistance within the United States.
Specific warranty details, if applicable beyond product support for missing or defective parts, should be referenced in the documentation included with your purchase or by contacting the manufacturer directly.
Customer Support
For assistance with missing parts, defective components, or general inquiries regarding your nanoblock Koala building kit, please contact the authorized distributor or manufacturer.
- Manufacturer: Kawada Co., Ltd. (nanoblock)
- Authorized U.S. Distributor: Bluefin / Bandai Namco Collectibles (as indicated by the warning label on your product box)
- Online Resources: Visit the official nanoblock website or the distributor's website for FAQs, additional product information, and contact forms. You can also visit the nanoblock Store on Amazon for more information.
Please have your product model number (NBC257) and proof of purchase ready when contacting support.
