1. Introduction
Thank you for purchasing the CYBORIS T1 Portable IPX7 Waterproof Bluetooth Speaker. This manual provides detailed instructions for the proper use, setup, and maintenance of your speaker. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
Figure 1: CYBORIS T1 Speaker demonstrating its waterproof capability.
2. Package Contents
Please check the package for the following items:
- CYBORIS T1 Portable Bluetooth Speaker
- USB Charging Cable
- Carabiner Hook
- Instruction Manual (this document)
3. Product Overview
Familiarize yourself with the speaker's components and controls.
Figure 2: Front view of the CYBORIS T1 speaker with control buttons.
The speaker features a compact, circular design with a protective silicone shell. Key controls are located on the side and front for easy access. A carabiner hook is included for convenient portability.
- Power Button: Press and hold to turn on/off.
- Play/Pause Button: Press to play or pause music.
- Volume Up/Next Track Button: Press to increase volume, hold to skip to the next track.
- Volume Down/Previous Track Button: Press to decrease volume, hold to go to the previous track.
- Microphone: For hands-free calling.
- Charging Port: For connecting the USB charging cable.
- Micro SD Card Slot: For playing music directly from a Micro SD card.
4. Setup Instructions
4.1 Charging the Speaker
Before first use, fully charge the speaker.
- Connect the small end of the USB charging cable to the speaker's charging port.
- Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate.
- Charging typically takes approximately 3 hours. The indicator light will change or turn off once fully charged.
Figure 3: Battery and charging information for the CYBORIS T1 speaker.
4.2 Power On/Off
- To power on, press and hold the Power button until you hear an audible prompt and the LED indicator light flashes.
- To power off, press and hold the Power button again until you hear an audible prompt and the LED indicator light turns off.
4.3 Bluetooth Pairing
To connect your speaker to a Bluetooth-enabled device:
- Ensure the speaker is powered on and in pairing mode (the LED indicator will flash rapidly).
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available Bluetooth devices.
- Select "CYBORIS-T1" from the list of devices.
- Once paired, the LED indicator will stop flashing and remain solid, and you will hear a confirmation tone.
The maximum connection distance is approximately 100-120 feet in open air.
4.4 True Wireless Stereo (TWS) Pairing
You can pair two CYBORIS T1 speakers together for a stereo sound experience.
- Ensure both CYBORIS T1 speakers are powered on and not connected to any other Bluetooth device.
- On one speaker (this will be the primary speaker), double-press the Play/Pause button. The speaker will enter TWS pairing mode.
- The two speakers will automatically connect to each other. You will hear a confirmation tone once connected.
- Once TWS paired, connect your mobile device to the primary speaker via Bluetooth as described in Section 4.3.
- The two speakers will now function as a stereo pair, with one playing the left channel and the other the right channel.
Figure 4: TWS connection setup for two CYBORIS T1 speakers.
4.5 Micro SD Card Playback
The speaker supports playing audio files directly from a Micro SD (TF) card.
- Insert a Micro SD card (up to 64GB) with compatible audio files (e.g., MP3, WMA, FLAC, APE) into the Micro SD card slot.
- The speaker will automatically switch to Micro SD card playback mode and begin playing music.
- Use the Play/Pause and Volume/Track buttons to control playback.
Figure 5: Micro SD card insertion for direct music playback.
5. Operating Instructions
5.1 Music Playback
- Play/Pause: Press the Play/Pause button.
- Volume Up: Press the Volume Up button.
- Volume Down: Press the Volume Down button.
- Next Track: Hold the Volume Up button.
- Previous Track: Hold the Volume Down button.
5.2 Hands-Free Calling
When connected to your phone via Bluetooth:
- Answer Call: Press the Play/Pause button once.
- End Call: Press the Play/Pause button once during a call.
- Reject Call: Press and hold the Play/Pause button.
- Redial Last Number: Double-press the Play/Pause button.
5.3 Waterproof Usage Guidelines (IPX7)
The CYBORIS T1 speaker is IPX7 rated, meaning it can be submerged in water up to 1 meter (3 feet) for 30 minutes. It is designed to float, making it suitable for use in pools, showers, and other water environments.
Figure 6: CYBORIS T1 speaker in a shower environment, highlighting its IPX7 waterproof feature.
- Ensure the charging port cover is securely closed before exposing the speaker to water.
- While the speaker is waterproof, if the speaker holes become filled with water, the sound output may be muffled. Gently shake the speaker to clear the water for optimal sound.
- For best Bluetooth signal transmission in a pool, keep your mobile device on higher ground and maintain a clear line of sight between the device and the speaker.
Figure 7: The CYBORIS T1 speaker floating on water.
Figure 8: The CYBORIS T1 speaker attached to a backpack, demonstrating its portability.
6. Maintenance
- Clean the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the charging port is dry before charging.
- Store the speaker in a cool, dry place when not in use.
- Avoid exposing the speaker to extreme temperatures or direct sunlight for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery. | Charge the speaker for 3 hours. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from device. | Ensure speaker is in pairing mode (flashing LED). Turn on Bluetooth on your device. Move speaker closer to device (within 100ft). |
| No sound or low volume. | Volume too low on speaker or device; water in speaker holes. | Increase volume on both speaker and connected device. If in water, gently shake speaker to clear water. |
| TWS pairing fails. | Speakers already connected to other devices; incorrect pairing steps. | Ensure both speakers are disconnected from other devices. Follow TWS pairing steps precisely (Section 4.4). |
8. Specifications
Figure 9: Technical specifications as provided on product packaging.
| Feature | Detail |
|---|---|
| Model Name | CYBORIS-T1 |
| Speaker Type | IPX7 Waterproof Swimming Speaker |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | Up to 100-120 feet (open air) |
| Water Resistance Level | IPX7 (Submersible up to 1m for 30 min) |
| Speaker Maximum Output Power | 5 Watts |
| Battery Type | 1 Lithium Ion (included) |
| Battery Capacity | 900 mAh |
| Charging Time | Approximately 3 hours |
| Play Time | Up to 8 hours (at 65dB SPL) |
| Product Dimensions | 3.8"D x 3.8"W x 1.8"H |
| Item Weight | 0.24 Kilograms (8.4 ounces) |
| Micro SD Card Support | Yes (up to 64GB) |
| Control Method | Touch buttons |
9. Warranty and Support
The CYBORIS T1 speaker comes with a limited warranty. For specific warranty details and support inquiries, please refer to the warranty information provided at the time of purchase or contact the seller directly.
For technical assistance or questions not covered in this manual, please reach out to CYBORIS customer support through the platform where the product was purchased.
