De'Longhi 5551000900
Contents
DeLonghi Portable Air Conditioner Window Kit Instruction Manual
Model: 5551000900
1. Introduction
This instruction manual provides detailed guidance for the proper installation, operation, and maintenance of your DeLonghi Portable Air Conditioner Window Kit. This original DeLonghi replacement part is designed to facilitate the exhaust of hot air from your portable air conditioner through a window opening. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
For a list of compatible models, please refer to the "Specifications" section or the product identification plate, typically located on the underside of your appliance.
2. Product Overview
The DeLonghi Portable Air Conditioner Window Kit (Model 5551000900) is a sliding shutter accessory designed to provide a secure and efficient connection for your portable air conditioner's exhaust hose to a window. It features a pre-cut hole for the exhaust hose attachment.

Figure 2.1: DeLonghi Portable Air Conditioner Window Kit. This image shows the elongated, light grey plastic panel with a large oval-shaped opening in the center, designed to accommodate the air conditioner's exhaust hose. One end of the panel has a small, notched cutout for secure fitting.
2.1. Package Contents
- 1 x DeLonghi Portable Air Conditioner Window Kit (Sliding Shutter)
- (Additional components, if any, are typically included with the main air conditioner unit or sold separately.)
3. Setup and Installation
Before beginning installation, ensure your portable air conditioner is unplugged from the power outlet.
3.1. Preparing the Window
- Open the window where you intend to install the air conditioner exhaust.
- Measure the height or width of the window opening to ensure it is compatible with the window kit. The kit is designed for vertical or horizontal sliding windows.
3.2. Installing the Window Kit
- Place the DeLonghi Window Kit into the open window frame. Ensure the kit fits snugly within the frame, minimizing gaps.
- Adjust the sliding mechanism of the kit to extend or retract it to perfectly fit the window opening. Secure it in place if your window kit has locking mechanisms.
- Ensure the hole in the window kit is facing outwards, ready to receive the exhaust hose.
3.3. Connecting the Exhaust Hose
- Attach the exhaust hose from your portable air conditioner to the designated opening on the window kit. This usually involves twisting or clicking the hose connector into place.
- Ensure the connection is secure to prevent hot air from re-entering the room.
- Close the window as much as possible against the window kit to further seal the opening.
4. Operating Instructions
Once the window kit and exhaust hose are securely installed, you can operate your portable air conditioner according to its specific user manual. The window kit's primary function is to provide an efficient outlet for the hot air expelled by the air conditioner.
- Ensure the exhaust hose is not kinked or blocked, as this can reduce the efficiency of the air conditioner and potentially cause overheating.
- Periodically check the seal between the window kit and the window frame to ensure no air leaks are occurring.
5. Maintenance
Regular maintenance of the window kit ensures its continued effectiveness and extends its lifespan.
5.1. Cleaning
- Wipe the surface of the window kit with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as these can damage the plastic material.
- Ensure the exhaust opening is free from dust or debris.
5.2. Storage
- When not in use, especially during off-season, detach the window kit from the window and the exhaust hose.
- Store the kit in a clean, dry place, away from direct sunlight and extreme temperatures, to prevent warping or damage.
6. Troubleshooting
This section addresses common issues related to the window kit.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot air re-entering the room. | Poor seal around the window kit or exhaust hose. | Ensure the window kit is properly sealed in the window frame. Check that the exhaust hose is securely attached to the kit and the air conditioner. Use weather stripping if necessary to seal gaps. |
| Window kit does not fit the window. | Incorrect measurements or incompatible window type. | Verify window dimensions against product specifications. Ensure the window is a vertical or horizontal sliding type. |
| Exhaust hose detaches from the kit. | Improper attachment or worn connector. | Re-attach the exhaust hose firmly, ensuring it clicks or twists into place. If the connector is worn, consider replacing the hose or kit. |
7. Specifications
| Attribute | Value |
|---|---|
| Brand | De'Longhi |
| Model Number | 5551000900 |
| Product Dimensions (L x W x H) | 9.8 x 2.3 x 58 cm |
| Item Weight | 530 g |
| Compatible Models |
|
8. Warranty and Support
This product is an original DeLonghi replacement part. For warranty information regarding your specific portable air conditioner unit or this accessory, please refer to the documentation provided with your main appliance or visit the official DeLonghi website.
If you require further assistance or have questions not covered in this manual, please contact DeLonghi customer support or an authorized service center. Ensure you have your product model number (5551000900) and the model number of your portable air conditioner readily available when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.