De'Longhi DEC Series HEPA Filter

Download PDF
Contents

De'Longhi HEPA Filter Instruction Manual for DEC Series Dehumidifiers

Model: DEC Series HEPA Filter

1. Product Overview

This document provides essential information for the De'Longhi HEPA filter, an original replacement component designed for specific De'Longhi dehumidifier models. The HEPA filter is crucial for maintaining air quality by capturing airborne particles such as dust, pollen, and pet dander, ensuring efficient operation of your dehumidifier.

This filter measures approximately 284 x 208 x 5 mm.

2. Compatibility

This HEPA filter is compatible with the following De'Longhi dehumidifier models:

  • DEC16
  • DEC18 (including white label type A, white label type B, MGY label type B)
  • DEC180E (including label type B)
  • DEC18A
  • DEC18C R134a
  • DEC18MGY (including label type A)
  • SDC18 (including label type A, label type B)

To ensure correct compatibility, please verify your dehumidifier's model number on the appliance's type plate, typically located on the underside or back of the unit. If your specific model is not listed, please contact De'Longhi customer support for assistance.

3. Installation Instructions

Follow these general steps to replace the HEPA filter in your De'Longhi dehumidifier. Specific steps may vary slightly by model; refer to your dehumidifier's primary instruction manual for detailed guidance.

  1. Power Off and Unplug: Before beginning, ensure the dehumidifier is turned off and unplugged from the power outlet to prevent electrical hazards.
  2. Locate Filter Compartment: Identify the filter compartment on your dehumidifier. This is usually a removable panel on the back or side of the unit.
  3. Remove Old Filter: Open the compartment and carefully remove the used HEPA filter. Dispose of the old filter responsibly.
  4. Insert New Filter: Unpack the new De'Longhi HEPA filter. Insert the new filter into the compartment, ensuring it is seated correctly and securely. The filter should fit snugly without forcing.
  5. Close Compartment: Close the filter compartment panel until it clicks into place or is securely fastened.
  6. Restore Power: Plug the dehumidifier back into the power outlet and turn it on.
De'Longhi HEPA filter, a light blue rectangular filter with a textured surface.

Image: De'Longhi HEPA filter. This is a light blue, rectangular filter with a finely textured surface, designed for air purification in compatible dehumidifiers.

4. Maintenance

The HEPA filter is a consumable part and requires regular replacement to maintain optimal dehumidifier performance and air quality. The replacement frequency depends on usage and environmental conditions, but generally, it is recommended to replace the HEPA filter every 6 to 12 months.

  • Check Filter Indicator: Many De'Longhi dehumidifiers have a filter indicator light that illuminates when it's time to check or replace the filter.
  • Visual Inspection: Periodically inspect the filter for visible signs of dirt, dust accumulation, or discoloration. A heavily soiled filter will reduce efficiency.
  • Do Not Wash: HEPA filters are not washable. Attempting to wash the filter will damage its structure and effectiveness. Always replace with a new, genuine De'Longhi HEPA filter.

5. Specifications

De'Longhi HEPA Filter Specifications
FeatureDetail
Part Number5348035600
Dimensions (L x W x H)284 x 208 x 5 mm (approx. 28 x 21 x 1 cm)
Weight30 g
MaterialHEPA filter material, plastic frame
ColorWhite/Light Blue
Special FeaturesPortable (as a component)

6. Troubleshooting

If you experience issues after replacing the filter, consider the following:

  • Reduced Dehumidification: Ensure the new filter is correctly installed and the filter compartment is fully closed. A misaligned filter can impede airflow.
  • Filter Indicator Light Remains On: Some dehumidifiers require a manual reset after filter replacement. Consult your dehumidifier's main manual for specific instructions on resetting the filter indicator.
  • Unusual Noises: Check that the filter is securely seated and not vibrating within its compartment.

For persistent issues, refer to your dehumidifier's complete troubleshooting guide or contact De'Longhi customer support.

7. Support and Warranty

For further assistance, technical support, or warranty information regarding your De'Longhi products, please visit the official De'Longhi website or contact their customer service department. Ensure you have your dehumidifier's model number and the filter's part number (5348035600) available when seeking support.

Note: This HEPA filter is an original De'Longhi spare part. Using non-genuine parts may void your dehumidifier's warranty or affect its performance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.