User Manual

1. Introduction and Safety Information

Thank you for choosing the Fieldmann FDS 10102-A Cordless Screwdriver UNICO. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

General Safety Warnings:

• Always wear appropriate personal protective equipment (PPE) such as safety glasses.
• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

2. Product Components

The Fieldmann FDS 10102-A Cordless Screwdriver UNICO is designed for versatility and ease of use. Key components include:

• Screwdriver Body: The main housing containing the motor and battery.
• Interchangeable Bit Cartridge: Features 6 fixed, articulated, and pivoting bits for quick selection.
• Pivoting Handle: Allows for two different operating positions for improved ergonomics.
• LED Work Light: Illuminates the work area for better visibility.
• Battery Charge Indicator: LED lights to show the current battery status.
• Trigger Switch: Activates the screwdriver.
• Forward/Reverse Switch: Changes the rotation direction.

Figure 1: The Fieldmann FDS 10102-A Cordless Screwdriver UNICO. This image shows the compact design of the screwdriver, highlighting its integrated bit cartridge with six different bits ready for use. The ergonomic handle and the yellow trigger are also visible.

3. Setup and Initial Use

3.1 Charging the Battery

The FDS 10102-A is powered by a 3.6V 1300mAh Lithium battery. For optimal performance, fully charge the battery before first use.

1. Locate the charging port on the screwdriver.
2. Connect the provided charger to the charging port.
3. Plug the charger into a suitable power outlet.
4. The battery charge indicator LEDs will show the charging status. Charge until all LEDs indicate a full charge.
5. Once fully charged, disconnect the charger from the tool and the power outlet.

3.2 Selecting and Engaging a Bit

The UNICO features a unique integrated bit cartridge with 6 interchangeable bits.

1. Identify the required bit type for your task.
2. Rotate the bit cartridge until the desired bit is aligned with the chuck.
3. Push the bit forward into the chuck until it clicks securely into place. Ensure it is fully seated before operation.

3.3 Adjusting the Pivoting Handle

The handle can be adjusted to two positions for comfort and access in tight spaces.

1. Locate the handle pivot release button (if present, otherwise gently pivot).
2. Press the button and pivot the handle to the desired straight or pistol-grip position.
3. Ensure the handle locks securely in place before use.

4. Operating Instructions

4.1 Powering On/Off and Direction Control

• To start the screwdriver, press the trigger switch. The speed is controlled by the pressure applied to the trigger.
• To stop the screwdriver, release the trigger switch.
• Use the forward/reverse switch (typically located near the trigger) to select the desired rotation direction for driving or removing screws. Ensure the switch is fully engaged in either forward or reverse before operating.

4.2 Using the LED Work Light

The integrated LED light automatically illuminates the work area when the trigger is pressed, providing better visibility in dimly lit conditions.

4.3 Monitoring Battery Charge

The LED battery charge indicator provides a visual representation of the remaining battery life. Refer to the indicator during use and recharge the battery when the charge level is low to avoid interruptions.

5. Maintenance

5.1 Cleaning

• Always disconnect the charger before cleaning.
• Wipe the tool's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Keep ventilation openings clear of dust and debris to prevent overheating. Use compressed air if necessary.

5.2 Battery Care and Storage

• Store the screwdriver and charger in a dry, cool place, away from direct sunlight and extreme temperatures.
• For long-term storage, charge the Lithium battery to approximately 50% to prolong its lifespan. Recharge every 3-6 months if not in use.
• Do not store the tool with a fully discharged battery.

6. Troubleshooting

7. Technical Specifications

8. Warranty and Support

For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Fieldmann website. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact Fieldmann customer service through their official channels. Contact information can typically be found on the manufacturer's website or on the product packaging.

Manufacturer: Fieldmann

Website: www.fieldmann.com (Note: This is a placeholder URL, please refer to official documentation for the correct website.)