Skullcandy Ink'd Bluetooth Wireless Earbuds User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Skullcandy Ink'd Bluetooth Wireless Earbuds (Model S2IKW-L682). Please read this guide thoroughly to ensure proper use and to maximize your listening experience.

Package Contents

Verify that all items are present in your package:

• Skullcandy Ink'd Bluetooth Wireless Earbuds
• USB Charging Cable
• Multiple Ear Tips (various sizes)
• User Guide (this document)

Image: Front view of the Skullcandy Ink'd Bluetooth Wireless Earbuds, showcasing the flexible collar and earbuds.

Setup

1. Charging the Earbuds

Before first use, fully charge your earbuds. A full charge provides up to 8 hours of listening time.

1. Locate the charging port on the control module (typically on the right side of the flexible collar).
2. Connect the supplied USB charging cable to the charging port.
3. Connect the other end of the USB cable to a USB power source (e.g., computer, wall adapter).
4. The LED indicator will illuminate to show charging status. Charging typically takes approximately 2.5 hours.
5. Once fully charged, the LED indicator will change color or turn off. Disconnect the charging cable.

2. Bluetooth Pairing

To connect your earbuds to a device, follow these steps:

1. Ensure the earbuds are powered off.
2. Press and hold the multi-function button (often marked with the Skullcandy logo) for approximately 5 seconds until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "Skullcandy Ink'd" or "Ink'd Wireless" from the list of available devices.
5. Once connected, the LED indicator on the earbuds will typically flash blue intermittently or turn solid blue.
6. If prompted for a passcode, enter "0000".

Image: Side view of the earbuds, highlighting the control module with buttons and the flexible neckband.

Operating Instructions

Power On/Off

• Power On: Press and hold the multi-function button for 3 seconds.
• Power Off: Press and hold the multi-function button for 5 seconds.

Music Controls

• Play/Pause: Press the multi-function button once.
• Volume Up: Press the "+" button once.
• Volume Down: Press the "-" button once.
• Next Track: Press and hold the "+" button for 2 seconds.
• Previous Track: Press and hold the "-" button for 2 seconds.

Call Controls

• Answer/End Call: Press the multi-function button once.
• Reject Call: Press and hold the multi-function button for 2 seconds.
• Activate Voice Assistant: Press the multi-function button twice.

Image: A person wearing the Skullcandy Ink'd earbuds, demonstrating their lightweight and flexible design.

Maintenance

Proper care ensures the longevity of your earbuds.

• Cleaning: Gently wipe the earbuds and flexible collar with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
• Ear Tips: Remove ear tips periodically and clean them with a mild soap solution, then rinse and dry thoroughly before reattaching.
• Storage: When not in use, store the earbuds in a cool, dry place, away from direct sunlight and extreme temperatures. The flexible collar allows for compact storage.
• Water Exposure: These earbuds are not waterproof. Avoid exposure to excessive moisture or submersion in water.

Image: Close-up view of an Ink'd earbud, showing the design and ear tip.

Troubleshooting

Specifications

Warranty and Support

Skullcandy products are designed and built to last. For detailed warranty information, product registration, or technical support, please visit the official Skullcandy website or contact their customer service directly.

Official Website: www.skullcandy.com