Introduction
This instruction manual provides detailed information for the installation, operation, and maintenance of your Delta Woodhurst Brushed Nickel Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.
The Delta Woodhurst Bath Collection offers a refined style with button-cap detailing. This faucet is designed for widespread bathroom sink installations and includes a metal push-pop drain assembly. Delta WaterSense labeled faucets are designed to use at least 20% less water than the industry standard while maintaining performance.
Image: Delta Woodhurst Brushed Nickel Bathroom Faucet, showing the main faucet body with a curved spout and two lever handles, all in a brushed stainless finish.
Setup and Installation
The Delta Woodhurst faucet is designed for easy DIY installation, fitting 3-hole, 4-16 inch widespread installations. Follow these steps for a secure and leak-free setup.
Pre-Installation Considerations
- Ensure your sink has 3 holes for widespread installation.
- Verify the hole size is between 1.13-1.5 inches.
- Confirm maximum deck thickness is 1.19 inches.
- Water supply connection is 0.5 inches.
- Minimum clearance to backsplash required is 1.19 inches.
Image: Diagram illustrating the dimensions and hole requirements for the Delta Woodhurst faucet, including spout height (6 inches), spout reach (5.25 inches), and widespread width range (4.5-16 inches).
Installation Steps
- Feed Supply Lines: Feed supply lines through base gaskets, then through the outside holes of the sink.
- Feed Spout Inlet: Feed the spout inlet through its base gasket, then through the center hole.
- Secure Bracket: Secure the mounting bracket to the mounting stud using the included wrench with the pre-installed nut.
- Connect Spout Inlet: Connect the spout inlet to the valve outlets using the supplied hose.
- Connect Supply Lines: Connect the hot and cold supply stops (not included) and tighten with an adjustable wrench.
- Remove Aerator: Remove the aerator with the included wrench, run water for 30 seconds to flush the system, then reinstall the aerator.
- Install Drain: Uninstall any existing drain, then install the new metal push-pop drain assembly. Ensure it is properly sealed to prevent leaks.
Image: Visual guide showing seven steps for installing the Delta Woodhurst widespread bathroom faucet, from feeding supply lines to installing the drain.
Quick-Connect System
The faucet features a wrench-free, quick-connect hose system. The hose audibly clicks when water lines are connected properly, ensuring a secure connection and helping to prevent leaks.
Image: A hand demonstrating the quick-connect system for the faucet's water lines, showing the audible click mechanism for secure installation.
Operation
The Delta Woodhurst faucet features two lever handles for controlling water flow and temperature. The metal push-pop drain assembly allows for easy opening and closing of the drain.
- Water Flow: Turn the handles to adjust the water flow.
- Temperature Control: Rotate the left handle for hot water and the right handle for cold water. Adjust both handles to achieve desired water temperature.
- Drain Operation: Press the top of the metal pop-up drain to close it and retain water in the sink. Press again to open the drain and allow water to flow out.
Image: The Delta Woodhurst faucet installed on a bathroom vanity, with water flowing from the spout into the sink, demonstrating typical operation.
Maintenance
Proper care and maintenance will ensure the longevity and performance of your Delta Woodhurst faucet.
Cleaning and Finish Care
The Brilliance finishes are engineered for durability and tested for corrosion resistance, exceeding industry standards. They are also scratch-resistant and tested against over 100 household cleaners.
- Clean the faucet regularly with a soft, damp cloth.
- Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- For stubborn spots, use a mild soap and water solution, then rinse thoroughly and dry.
Image: A close-up of the Delta Woodhurst faucet with text highlighting its corrosion-resistant Brilliance Stainless Finish, tested to at least 2 times industry standard.
Image: A hand cleaning the faucet, emphasizing its scratch-resistant high-performance finish, tested against household cleaners and abrasion.
Drain Cleaning
The metal push-pop drain is designed for easy cleaning.
- The drain assembly unscrews from above the deck, allowing for quick removal.
- Remove the drain to easily clear hair and other debris that may accumulate.
- Reinstall the drain by screwing it back into place, ensuring a tight seal.
Valve Reliability
The valve cartridge is tested to last at least 500,000 uses, ensuring high performance with minimal drips and smooth handle operation.
Image: An exploded view diagram of the faucet's internal components, highlighting the reliable valve, corrosion-resistant mounting shanks, and secure installation features.
Troubleshooting
This section addresses common issues you might encounter with your Delta Woodhurst faucet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or debris in supply lines. | Remove and clean the aerator. Flush supply lines by running water without the aerator for 30 seconds. |
| Leaking from Faucet Base | Loose connections or damaged gaskets. | Check all connections under the sink for tightness. Ensure gaskets are properly seated and not damaged. |
| Drain Not Sealing Properly | Debris in drain, improper installation of drain assembly. | Remove the push-pop drain assembly and clear any debris. Reinstall, ensuring it is screwed in tightly and sealed correctly. |
| Handles Stiff or Hard to Turn | Mineral buildup or worn cartridge. | Flush the system. If the issue persists, the valve cartridge may need inspection or replacement. Contact customer support. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | DELTA |
| Model Name | Woodhurst™ |
| Model Number | 3532LF-SSMPU |
| Color | Stainless (Brushed Finish) |
| Material | Stainless Steel (Faucet), Metal (Handles) |
| Mounting Type | Deck Mount |
| Hole Count | 3 |
| Number of Handles | 2 |
| Special Feature | Pop Up Drain |
| Maximum Flow Rate | 1.2 Gallons Per Minute (WaterSense Certified) |
| Product Dimensions | 2"D x 6"W x 6.81"H |
| Item Weight | 4.62 pounds |
| Spout Height | 6 Inches |
| Spout Reach | 5.25 Inches |
| Included Components | Instruction Manual, Metal Push-Pop Drain Assembly |
Image: The WaterSense logo, indicating the product meets EPA criteria for water efficiency.
Warranty and Support
Lifetime Limited Warranty
Delta bathroom faucets are backed by Delta Faucet's Lifetime Limited Warranty. This warranty covers defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed.
For full warranty details, please refer to the official Delta Faucet website or contact customer support.
Customer Support
For assistance with installation, troubleshooting, or warranty claims, please contact Delta Faucet customer support.
- Phone: 1-800-345-3358
- Online Resources: Explore Delta Faucet's YouTube channel for step-by-step installation videos and other helpful guides.
Image: A Delta Faucet customer service representative, highlighting the availability of support via phone.
Important Notes
This product may expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
