1. Product Overview
The Anker PowerPort Atom PD 1 is an ultra-compact wall charger designed for efficient power delivery to a wide range of devices, including phones, tablets, and notebooks. Utilizing advanced GaN (Gallium Nitride) technology, this charger offers high-speed charging in a significantly smaller form factor.
Image 1: Anker PowerPort Atom PD 1 30W USB-C Wall Charger. This compact white charger features a single USB-C port and foldable prongs for portability.
Key Features
- Small Yet Mighty: Delivers 30W output for high-speed charging to phones, tablets, and notebooks.
- High-Speed Charging: Charges compatible iPhones (8/8+/X/XS/XS/Max) up to 50% in approximately 30 minutes, which is 2.5 times faster than a standard 5W iPhone charger.
- Ultra-compact Design: Approximately 40% smaller than a standard MacBook charger, making it highly portable.
- Powered by GaN: Utilizes Gallium Nitride semiconductors for higher efficiency, cooler operation, and a smaller overall size.
- What's Included: PowerPort Atom PD 1 wall charger and a welcome guide. (Note: Charging cable is not included).
2. Setup Guide
Follow these simple steps to begin using your Anker PowerPort Atom PD 1 charger:
- Unfold the Prongs: Gently pull out the foldable prongs located on the back of the charger until they lock into place.
- Connect to Power Outlet: Insert the charger into a standard wall power outlet.
- Connect USB-C Cable: Obtain a compatible USB-C to USB-C or USB-C to Lightning cable (not included). Plug one end of the cable into the USB-C port on the charger.
- Connect to Device: Plug the other end of the cable into your device (phone, tablet, or laptop) to begin charging.
Image 2: The Anker 30W USB-C charger is shown plugged into a wall outlet, ready to charge a device.
3. Operating Instructions
Connecting Your Device
The PowerPort Atom PD 1 features a single USB-C port for power delivery. Ensure you use a high-quality USB-C cable that is compatible with your device's charging requirements.
Fast Charging Capabilities
This charger supports Power Delivery (PD) for rapid charging of compatible devices. For optimal fast charging, ensure your device and cable also support USB Power Delivery.
Image 3: This graphic illustrates the Anker PowerPort Atom PD 1 charging an iPhone XS Max to 50% in 30 minutes, significantly faster than a 5W stock charger.
Image 4: The charger is shown providing a 30W USB-C output to a 12-inch MacBook, capable of charging it to 100% in 2 hours.
Universal Compatibility
The PowerPort Atom PD 1 is compatible with a wide range of devices:
- Phones: iPhone XS/Max/XR/X/8 Plus/8 (requires USB-C to Lightning cable for Power Delivery fast charging), Samsung Galaxy S9/S9+/S8/S8+/Note 8/Note 7, Nexus 5X/6P, LG G6/G5, Pixel C/3/2/XL, Moto Z.
- Tablets: iPad Pro 12.9''/iPad Pro 10.5''/iPad Pro 11'' (requires USB-C to Lightning cable for Power Delivery fast charging for iPad models earlier than 2018, and all compatible iPhones).
- Laptops: MacBook Air 13''(2018)/MacBook 12''/MacBook Pro 13''/MacBook Pro 15''.
- Other Devices: Charges Nintendo Switch (does not support "Charge-and-Play" in TV mode).
Image 5: A visual guide to the universal compatibility of the Anker PowerPort Atom PD 1 with Apple devices and other USB-C enabled devices.
4. Care and Maintenance
To ensure the longevity and optimal performance of your Anker PowerPort Atom PD 1 charger, please follow these guidelines:
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. The foldable prongs help protect them during storage and travel.
- Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Avoid using liquid cleaners or abrasive materials.
- Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not attempt to disassemble or modify the charger.
- Environmental Conditions: Do not expose the charger to water, moisture, or high humidity.
5. Troubleshooting
If you encounter any issues with your Anker PowerPort Atom PD 1 charger, please refer to the following common solutions:
- Device Not Charging:
- Ensure the charger is securely plugged into a working wall outlet.
- Verify that the USB-C cable is properly connected to both the charger and your device.
- Try using a different USB-C cable to rule out a faulty cable.
- Test the charger with a different device to confirm if the issue is with the charger or the device.
- Slow Charging:
- Ensure your device and cable support USB Power Delivery for optimal fast charging speeds.
- Charging speed can be affected by the device's battery level (charging slows down as the battery approaches full).
- High ambient temperatures can sometimes reduce charging efficiency.
- Charger Overheating:
- The charger is designed with GaN technology for cooler operation. However, some warmth during charging is normal.
- If the charger becomes excessively hot, disconnect it immediately and allow it to cool down. Ensure it is used in a well-ventilated area.
- If overheating persists, discontinue use and contact customer support.
6. Technical Specifications
| Specification | Value |
|---|---|
| Product Dimensions | 2.17 x 1.38 x 1.61 inches |
| Item Weight | 2.08 ounces |
| Model Number | A2017121 |
| Total Wattage | 30W |
| Input | 100 - 240V ~ 1.2A 50 - 60Hz |
| Output | 5V ⎓ 3A / 9V ⎓ 3A / 15V ⎓ 2A / 20V ⎓ 1.5A |
| Connector Type | USB Type C |
| Special Features | Fast Charging, GaN Technology, Compact Design |
| Color | White |
7. Warranty and Customer Support
Anker provides an 18-month worry-free warranty for the PowerPort Atom PD 1. If you experience any issues or have questions regarding your product, please contact Anker customer service for assistance.
For further support, visit the official Anker website or refer to the contact information provided in your product's welcome guide.
