AR Blue Clean 5227

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

AR Blue Clean 5227 36-Inch Extension Lance

Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your AR Blue Clean 5227 36-Inch Extension Lance. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.

Safety Information

Always observe general safety precautions when operating pressure washing equipment. This extension lance is designed to increase your reach; however, it does not reduce the inherent risks associated with high-pressure water. Failure to follow these instructions may result in injury or property damage.

  • Ensure all connections are secure before operating the pressure washer.
  • Do not point the pressure washer nozzle at people, pets, or electrical equipment.
  • Wear appropriate personal protective equipment, including eye protection.
  • Maintain a firm grip on the lance during operation, especially when activating the spray.
  • Do not exceed the maximum operating pressure of 4000 PSI.

Package Contents

Verify that all components are present and undamaged:

  • 1 x AR Blue Clean 5227 36-Inch Extension Lance

Specifications

FeatureSpecification
Model Number5227
Length36 inches
MaterialAluminum
Maximum Operating Pressure4000 PSI
Inlet Connection TypeM22 Quick Connect
Outlet Connection Type1/4-inch Quick Connect
Maximum Temperature300°F

Setup

Follow these steps to properly connect the extension lance to your pressure washer system:

  1. Inspect Connections: Ensure both the M22 quick connect (inlet) and the 1/4-inch quick connect (outlet) on the extension lance are clean and free of debris.
  2. Connect to Pressure Washer Wand: Attach the M22 quick connect end of the extension lance to the M22 fitting on your pressure washer wand. Twist until secure.
  3. Connect Accessories: Insert your desired pressure washer nozzle or accessory into the 1/4-inch quick connect outlet on the other end of the extension lance. Pull back the collar, insert the accessory, and release the collar to lock it in place.
Close-up of the female M22 quick connect end of the extension lance.

Image: Female M22 quick connect for attaching to the pressure washer wand.

Close-up of the male 1/4-inch quick connect end of the extension lance.

Image: Male 1/4-inch quick connect for attaching nozzles and accessories.

Operating Instructions

The 36-inch extension lance is designed to provide additional reach for cleaning hard-to-access areas. Once properly connected, operate your pressure washer according to its manufacturer's instructions.

  • Extended Reach: Use the lance to clean high surfaces such as house siding, gutters, or vehicle roofs without the need for ladders.
  • Maintain Control: Due to the extended length, be aware of increased leverage and potential torque when the pressure washer is active. Maintain a stable stance and firm grip.
  • Nozzle Selection: Choose the appropriate nozzle for your cleaning task. The 1/4-inch quick connect is compatible with standard pressure washer nozzles.
A person using the AR Blue Clean 36-inch extension lance to clean a high wall.

Image: Demonstrating the use of the extension lance for cleaning high surfaces.

Maintenance

Proper maintenance ensures the longevity and performance of your extension lance.

  • Cleaning: After each use, rinse the lance thoroughly with clean water to remove any chemical residues or debris.
  • Inspection: Regularly inspect the quick connect fittings for wear, damage, or corrosion. Replace any damaged components immediately.
  • Storage: Store the extension lance in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid bending or placing heavy objects on the lance during storage.

Troubleshooting

If you encounter issues with your extension lance, refer to the following common problems and solutions:

  • Leakage at Connections:
    Possible Cause: Loose connection, worn O-rings, or debris in the fitting.
    Solution: Ensure connections are tightened securely. Inspect and clean fittings. Replace O-rings if they appear worn or damaged.
  • Reduced Pressure:
    Possible Cause: Clogged nozzle or obstruction in the lance.
    Solution: Remove and clean the nozzle. Check the lance for any blockages.
  • Difficulty Connecting/Disconnecting:
    Possible Cause: Dirt or corrosion in the quick connect mechanism.
    Solution: Clean the quick connect fittings. Apply a small amount of silicone grease to the O-rings if necessary.

Warranty

This AR Blue Clean 5227 36-Inch Extension Lance comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, accident, or unauthorized repairs. For warranty claims, please contact AR Blue Clean customer support with your proof of purchase.

Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official AR Blue Clean website or contact their customer service department. Have your product model number (5227) and purchase information ready when contacting support.

© 2026 AR Blue Clean. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.