1. Introduction
This manual provides instructions for the Hormann HSE2BS Hand Transmitter Replacement Casing. This product is an original Hormann spare part designed to replace a damaged or broken external casing for your existing HSE2BS hand transmitter. It includes the upper and lower shells of the casing, allowing you to transfer the functional internal electronics from your old transmitter into this new, durable red casing.
The replacement casing is red with chrome-colored accents and is compatible with all color variants of the HSE2BS model, ensuring a perfect fit for your device.
2. Package Contents
The package contains the following items:
- 1x Hormann HSE2BS Upper Casing Shell (Red)
- 1x Hormann HSE2BS Lower Casing Shell (Red)
Note: This product is a replacement casing only. It does not include the internal electronics, battery, or circuit board. These components must be transferred from your existing HSE2BS hand transmitter.
3. Setup & Installation
Follow these steps to replace the casing of your Hormann HSE2BS hand transmitter:
- Prepare Your Workspace: Ensure you have a clean, well-lit area. You may need a small screwdriver (not included) for disassembly.
- Open the Old Casing: Carefully open your existing HSE2BS hand transmitter. This usually involves prying apart the two halves or unscrewing small screws. Refer to your original transmitter's manual if you encounter difficulty.
- Remove Internal Components: Gently remove the circuit board and battery from the old casing. Handle these components with care to avoid damage.
- Insert Components into New Casing: Place the circuit board and battery into the new lower casing shell, ensuring they are correctly oriented and seated securely.
- Close the New Casing: Align the upper casing shell with the lower shell and carefully press them together until they click into place. Ensure all edges are flush and there are no gaps.
- Test Functionality: After assembly, test your hand transmitter to ensure it functions correctly.
Figure 1: Hormann HSE2BS red replacement casing, showing the assembled casing and the separated upper and lower shells. This image displays the Hormann HSE2BS red replacement casing. On the left, the fully assembled casing is shown, featuring the Hormann logo and chrome accents. To the right, the upper shell of the casing is separated, illustrating how the product is supplied as two distinct parts ready for internal component transfer.
4. Operation
Once the internal components are successfully transferred to the new casing, the operation of your Hormann HSE2BS hand transmitter remains unchanged. Press the button(s) as you normally would to control your garage door or gate opener. The new casing does not alter the functional performance of the transmitter.
5. Maintenance
To ensure the longevity and appearance of your replacement casing:
- Cleaning: Wipe the casing with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Protection: Protect the casing from extreme temperatures, direct sunlight for prolonged periods, and harsh impacts to prevent damage.
- Storage: Store the hand transmitter in a dry place when not in use.
6. Troubleshooting
If you encounter issues after replacing the casing, consider the following:
- Transmitter Not Working:
- Ensure the battery is correctly inserted and has sufficient charge.
- Verify that the circuit board is properly seated within the casing and all connections are secure.
- If the transmitter was not working before the casing replacement, the issue may be with the internal electronics, not the casing.
- Casing Not Closing Properly:
- Check that all internal components (circuit board, battery) are correctly positioned and not obstructing the closing mechanism.
- Ensure there are no foreign objects preventing the shells from aligning.
If problems persist, consult a qualified technician or contact Hormann customer support.
7. Specifications
| Brand | Hormann |
| Model Number | HSE2BS |
| Color | Red |
| Material | Plastic (Casing) |
| Compatibility | Hormann HSE2BS Hand Transmitter (all color variants) |
| Special Features | Ergonomic design |
| Connectivity Technology | Infrared (for the original transmitter) |
8. Warranty & Support
Information regarding specific warranty terms for this replacement casing is not provided in the product details. For warranty inquiries or technical support, please contact Hormann directly or the retailer from whom you purchased the product. Ensure you retain your proof of purchase.
For further assistance, please visit the official Hormann website or consult your local Hormann dealer.
