Feit Electric BPT6/SU/LED

Feit Electric BPT6/SU/LED 1.5 Watt T6 E12 Warm White LED Non-Dimmable Light Bulb User Manual

Introduction

This manual provides essential information for the safe and efficient use of your Feit Electric BPT6/SU/LED 1.5 Watt T6 E12 Warm White LED Non-Dimmable Light Bulb. Please read these instructions carefully before installation and retain them for future reference.

The Feit Electric BPT6/SU/LED is a 1.5-watt LED bulb designed to replace traditional incandescent bulbs, offering energy efficiency and a warm white light. It features a T6 shape and an E12 candelabra base, suitable for various indoor lighting fixtures. This bulb is non-dimmable.

Safety Information

  • WARNING: Risk of electric shock. Do not open.
  • Ensure power is turned OFF before installation, inspection, or removal.
  • Do not use with dimmers. This bulb is non-dimmable. Using it with a dimmer may cause damage to the bulb or dimmer.
  • Suitable for indoor use only.
  • Do not use in totally enclosed fixtures unless the fixture is specifically designed for LED bulbs.
  • Do not use where directly exposed to water.
  • This device is not intended for use with emergency exits or emergency lights.
  • Operating temperature range: -4°F to 104°F (-20°C to 40°C).

Setup and Installation

Follow these steps to install your Feit Electric LED bulb:

  1. Turn off power: Before replacing any light bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box to prevent electric shock.
  2. Allow cooling: If replacing an old incandescent bulb, allow it to cool completely before handling.
  3. Remove old bulb: Carefully unscrew the existing bulb from the fixture.
  4. Install new bulb: Screw the Feit Electric BPT6/SU/LED bulb into the E12 candelabra base socket until it is snug. Do not overtighten.
  5. Restore power: Turn the power back on at the circuit breaker or fuse box.
  6. Test: Turn on the light switch to confirm the bulb is working correctly.
Feit Electric BPT6/SU/LED 1.5 Watt T6 E12 Warm White LED Non-Dimmable Light Bulb

Image: Feit Electric BPT6/SU/LED 1.5 Watt T6 E12 Warm White LED Non-Dimmable Light Bulb. This image shows the compact T6 shape and E12 candelabra base of the LED bulb, ready for installation into a compatible fixture.

Operating Instructions

This Feit Electric LED bulb operates like a standard light bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Power On/Off: Use the existing wall switch or fixture switch to turn the light bulb on or off.
  • Non-Dimmable: This bulb is designed for non-dimmable circuits only. Do not attempt to use it with a dimmer switch, as this can lead to malfunction or damage.

Maintenance

The Feit Electric BPT6/SU/LED bulb requires minimal maintenance.

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: LED bulbs have a long lifespan. When replacement is eventually needed, follow the installation steps in reverse to remove the old bulb and install a new one.

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.
  • No power to the fixture.
  • Bulb not screwed in properly.
  • Fixture switch is off.
  • Circuit breaker tripped.
  • Bulb is faulty.
  • Check power supply.
  • Ensure bulb is securely screwed into the socket.
  • Turn on the fixture switch.
  • Reset the circuit breaker.
  • Replace the bulb with a new one.
Bulb flickers.
  • Used with a dimmer switch.
  • Loose connection.
  • Voltage fluctuations.
  • Remove from dimmer circuit; use in a non-dimmable fixture.
  • Ensure bulb is tightly screwed in.
  • Consult an electrician if voltage issues persist.

Specifications

FeatureDetail
BrandFeit Electric
Model NumberBPT6/SU/LED
Light TypeLED
Wattage1.5 Watts
Incandescent Equivalent15 Watts
Bulb Shape SizeT6
Bulb BaseE12 (Candelabra)
Light ColorWarm White
Color Temperature3000 Kelvin
Brightness50 Lumens
Efficiency33.33 lumens/watt
Voltage120 Volts (100 to 120 Volts and 60 Hertz)
Special FeatureNon-Dimmable
Indoor/Outdoor UsageIndoor
Material TypePlastic
CertificationsETL, FCC, RoHS

Warranty Information

This Feit Electric product comes with a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the product packaging or visit the official Feit Electric website. Retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or to view other Feit Electric products, please visit the official Feit Electric website or contact their customer service department.

Feit Electric Official Store: Feit Electric Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.